ADNK-2133

ADNK-2133 Datasheet


ADNK-2133

Part Datasheet
ADNK-2133 ADNK-2133 ADNK-2133 (pdf)
PDF Datasheet Preview
ADNK-2133

Optical Mouse Designer’s Kit

Product Overview

Avago Technologies and Freescale Semiconductor have joined forces to produce a new wireless optical mouse reference design kit. Based on the new Avago ADNS2030 low power optical mouse sensor and the powerful Freescale MC68HC908QY4/MC68HC908JB12 USB microcontroller, this reference design kit provides a power efficient and feature-rich solution.

The Avago ADNS-2030 optical mouse sensor, a staggered dual inline package DIP , is based on power management architecture with relatively good navigation performance. It is able to changes in position by optically acquiring sequential surface images of over 2300 fps and mathematically determining the direction and magnitude of movement.

The ADNS-2030 along with the HDNS-2100 lens, HDNS2200-001 clip and HLMP-ED80-XX000 form a complete, compact optical mouse tracking system. There are no mechanical parts, which means high reliability and less maintenance for the end user. In addition, precision optical alignment is not required, facilitating high volume assembly. The sensor is programmed via registers through a four-wire serial port.

The Freescale MC68HC908QY4/ MC68HC908JB12 is a member of the low-cost, high-performance M68HC08 Family of 8-bit microcontroller units MCUs . The M68HC08 Family is a Complex Instruction Set Computer CISC with a Von Neumann All MCUs in the family use the enhanced M68HC08 central processor unit CPU08 and are available with a variety of modules, memory sizes and types, and package types.

Features
• 98SE, Windows 2000, and Windows XP
compatibility
• USB low-speed compliance
• User identity code to avoid conflict with other devices
• High reliability
• Precise wireless optical navigation technology
• No mechanical moving parts
• Smooth surface navigation
• Programmable mouse sensor frame speed up to 2300
frames per sec fps
• Accurate motion up to 14 ips
• 800 cpi resolution
• A high data rate 27-MHz RF link
• kbps transmission data rate
• 2 meter communication distance
• 3361 compatible device for RF receiver design
• Power conservation mode during times of no move-
ment

The MC68HC908QY4 has an internal oscillator circuit which can generate a clock of MHz with no components needed. The auto wakeup generates a periodic interrupt during stop mode to wake the part up without requiring an signal. These features make the MC68HC908QY4 MCU suited for wireless optical mouse applications.

The features of the MC68HC908JB12 include a configurable universal serial bus USB , which makes this MCU suited for personal computer human interface devices HID applications, such as mice. The enhanced timer
function also allows it to capture and decode data easily, especially for high data rate wireless HID applications.

This kit is connectable to a PC via the USB port. It is also based on the 27 MHz RF technology, the data generated from displacement detection/button in the optical mouse is encoded with a pre-defined serial type protocol handled by firmware in the MCU. In the RF stage, the encoded data is used for FSK modulation. The captured data from the RF receiver stage is decoded with a corresponding packet format used for mouse applications. The final data is sent to the host through the USB interface.

Sensor

Clip

Lens/Light Pipe

Base Plate

Surface Figure Sectional view of PCB assembly highlighting optical mouse components optical mouse sensor, clip, lens, LED, PCB and base plate in the mouse.
ircuit
mntoAusDeNseSn-s2o0r 3a0ndoFprteiecsaclalme microcontroller.

FigureF3ig. uCrirecu3it.-lCevirecl 3widreelseisgsnoeprt’icsakl mit owusireeRleFsbsoaorpdt.ical mouse RF board.
12 USB microcontroller.

Kit Components

This designer’s kit contains the following components:

ADNK-2133 Mouse Set

Cordless Optical Mouse Optical Mouse Receiver

ADNS-2030

Soild-State Optical Mouse Sensor

MC68HC908JB12

Freescale USB Microcontroller

MC68HC908QY4 HDNS-2100 HDNS-2100-001 HDNS-2200 HDNS-2200-001 HLMP-ED80-XX000 ADNK-2133 CD

Metrowerks CD

Freescale low-cost Microcontroller

Round Lens Plate

Trimmed Lens Plate

LED Assembly Clip Black

LED Assembly Clip Transparent
639 nm T1 _ 5 mm Diameter LED

Includes Documentation and Support Files for ADNK-2133
More datasheets: B64290A0084X830 | MENB1090A1503F01 | MENB1090A1803F01 | MENB1090A4803F01 | CY8C5246LTI-029 | CY8C5248LTI-030 | CY8C5247LTI-089 | CY8C5247AXI-051 | CY8C5248AXI-047 | 10756


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ADNK-2133 Datasheet file may be downloaded here without warranties.

Datasheet ID: ADNK-2133 519933