ADJD-E622-QR999

ADJD-E622-QR999 Datasheet

ADJD-E622-QR999 RGB Color Sensor in QFN Package

Part	Datasheet
ADJD-E622-QR999	ADJD-E622-QR999 (pdf)

PDF Datasheet Preview
ADJD-E622-QR999 RGB Color Sensor in QFN Package Data Sheet ADJD-E622-QR999 is a high performance, small in size, cost effective light to voltage converting sensor. The sensor combines a photodiode array and three transimpedance amplifiers in a single monolithic CMOS IC solution. With a Red R , Green G and Blue B color filters coated over the photodiode array, the sensor converts RGB light to analog voltage outputs, denoted by VROUT, VGOUT and VBOUT, respectively. The sensor is packaged in a 5x5x0.75 [mm] surface mount QFN-16 package. • Ideal choice of light sensor in automotive applications such as dashboard lighting, automotive interior lighting, infotainment and navigational panel. • Other potential applications are such as environmental lighting, cabin lighting, decorative lighting, general color detection, industrial process, etc. • Can also be coupled with Avago Technologies’ patented color controller, HDJD-J822, to form a closed loop color management system • Convert light to R,G,B voltage output • Monolithic CMOS IC solution comprises of an array of photodiode coated with R,G, B color filter and integrated with transimpedance amplifier. • Independent gain selection options for each R,G,B channel • 3 sets of 3x3 photodiode array design to minimize the effect of contamination and optical aperture misalignment • Qualified per Automotive AEC-Q100 Standard Grade 3 • package and small in size 5x mm ESD WARNING Standard CMOS handling precautions should be observed to avoid static discharge. THIS PRODUCT IS NOT CERTIFIED OR WARRANTIED FOR AUTOMOTIVE APPLICATIONS. IF THE CUSTOMER INTENDS TO USE IT FOR AUTOMOTIVE APPLICATIONS, THEY DO SO AT THEIR OWN RISK. AVAGO WILL NOT BE RESPONSIBLE FOR ANY CLAIM OF PRODUCT FAILURE DURING OPERATION OR RELIABILITY ASSESSMENT. Package Dimension 5 6 78 16 15 14 13 Bottom View Note Dimensions are in millimeters mm Part Numbering System ADJD-E 6 X -X Gain Selection GS Option 999 For component level GS 000,001,010,011,100,101,110,111 Packing Type R Tape and Reel Product Packaging Q QFN Product ID 22 component without IR filter QFN 5x5 Theory of Operation The integral R,G,B color filters on the photodiode array detect the R,G,B components of the light falling on the sensor. The photodiode convert the R,G,B light components into photocurrents. The integrated transimpedence amplifiers for R,G,B components then converts the photocurrent to analog voltage outputs. The voltage output of each R,G,B channel increases linearly with increasing light intensity. Sensor IC Block Diagram Pin Out for ADJD-E622-QR999 Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 Pin 16 Pin Name Normal Operation VBOUT VGOUT Analog output voltage for BLUE Analog output voltage for GREEN VROUT VDD Analog output voltage for RED 5V DC Supply GSGRN2 Gain Selection Green bit 2 GSGRN1 Gain Selection Green bit 1 GSRED2 Gain Selection Red bit 2 GSRED1 Gain Selection Red bit 1 GSRED0 Gain Selection Red bit 0 No connection No connection

PDF Datasheet Preview

ADJD-E622-QR999 RGB Color Sensor in QFN Package

Data Sheet

ADJD-E622-QR999 is a high performance, small in size, cost effective light to voltage converting sensor. The sensor combines a photodiode array and three transimpedance amplifiers in a single monolithic CMOS IC solution. With a Red R , Green G and Blue B color filters coated over the photodiode array, the sensor converts RGB light to analog voltage outputs, denoted by VROUT, VGOUT and VBOUT, respectively. The sensor is packaged in a 5x5x0.75 [mm] surface mount QFN-16 package.
• Ideal choice of light sensor in automotive applications such as dashboard lighting, automotive interior lighting, infotainment and navigational panel.
• Other potential applications are such as environmental lighting, cabin lighting, decorative lighting, general color detection, industrial process, etc.
• Can also be coupled with Avago Technologies’ patented color controller, HDJD-J822, to form a closed loop color management system
• Convert light to R,G,B voltage output
• Monolithic CMOS IC solution comprises of an array
of photodiode coated with R,G, B color filter and integrated with transimpedance amplifier.
• Independent gain selection options for each R,G,B channel
• 3 sets of 3x3 photodiode array design to minimize the effect of contamination and optical aperture misalignment
• Qualified per Automotive AEC-Q100 Standard Grade 3
• package and small in size 5x mm

ESD WARNING Standard CMOS handling precautions should be observed to avoid static discharge.

THIS PRODUCT IS NOT CERTIFIED OR WARRANTIED FOR AUTOMOTIVE APPLICATIONS. IF THE CUSTOMER INTENDS TO USE IT FOR AUTOMOTIVE APPLICATIONS, THEY DO SO AT THEIR OWN RISK. AVAGO WILL NOT BE RESPONSIBLE FOR ANY CLAIM OF PRODUCT FAILURE DURING OPERATION OR RELIABILITY ASSESSMENT.

Package Dimension
5 6 78
16 15 14 13

Bottom View

Note Dimensions are in millimeters mm

Part Numbering System

ADJD-E 6 X -X

Gain Selection GS Option 999 For component level GS 000,001,010,011,100,101,110,111 Packing Type R Tape and Reel Product Packaging Q QFN Product ID 22 component without IR filter QFN 5x5

Theory of Operation

The integral R,G,B color filters on the photodiode array detect the R,G,B components of the light falling on the sensor. The photodiode convert the R,G,B light components into photocurrents. The integrated transimpedence amplifiers for R,G,B components then converts the photocurrent to analog voltage outputs. The voltage output of each R,G,B channel increases linearly with increasing light intensity.

Sensor IC Block Diagram

Pin Out for ADJD-E622-QR999

Pin 1 Pin 2

Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 Pin 16

Pin Name Normal Operation

VBOUT VGOUT

Analog output voltage for BLUE

Analog output voltage for GREEN

VROUT VDD

Analog output voltage for RED 5V DC Supply

GSGRN2 Gain Selection Green bit 2

GSGRN1 Gain Selection Green bit 1

GSRED2 Gain Selection Red bit 2

GSRED1 Gain Selection Red bit 1

GSRED0 Gain Selection Red bit 0

No connection

No connection

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ADJD-E622-QR999 Datasheet file may be downloaded here without warranties.

Datasheet ID: ADJD-E622-QR999 519924