ACSL-6400-06T

ACSL-6400-06T Datasheet


ACSL-6xx0 Multi-Channel and Bi-Directional, 15 MBd Digital Logic Gate Optocoupler

Part Datasheet
ACSL-6400-06T ACSL-6400-06T ACSL-6400-06T (pdf)
Related Parts Information
ACSL-6400-56T ACSL-6400-56T ACSL-6400-56T
ACSL-6400-50T ACSL-6400-50T ACSL-6400-50T
ACSL-6210-56R ACSL-6210-56R ACSL-6210-56R
ACSL-6210-50R ACSL-6210-50R ACSL-6210-50R
ACSL-6400-00T ACSL-6400-00T ACSL-6400-00T
ACSL-6210-06R ACSL-6210-06R ACSL-6210-06R
PDF Datasheet Preview
ACSL-6xx0 Multi-Channel and Bi-Directional, 15 MBd Digital Logic Gate Optocoupler

Data Sheet

Description ACSL-6xx0 are truly isolated, multi-channel and bi-directional, high-speed optocouplers. Integration of multiple optocouplers in monolithic form is achieved through patented process technology. These devices provide full duplex and bi-directional isolated data transfer and communication capability in compact surface mount packages. Available in 15 Mbd speed option and wide supply voltage range.

These high channel density make them ideally suited to isolating data conversion devices, parallel buses and peripheral interfaces.

Applications
• Full duplex communication
• Isolated line receiver
• Computer-peripheral interfaces
• Microprocessor system interfaces
• Digital isolation for A/D and D/A
conversion
• Switching power supply
• Instrument input/output isolation
• Ground loop elimination
• Pulse transformer replacement

Features
• Available in dual, triple and quad
channel configurations
• Bi-directional
• Wide supply voltage range 3.0V to 5.5V
• High-speed 15 MBd typical, 10 MBd minimum
• 10 kV/µs minimum Common Mode Rejection CMR at Vcm = 1000 V
• LSTTL/TTL compatible
• Safety and regulatory approvals Pending 2500Vrms for 1 min per UL1577 CSA Component Acceptance IEC/EN/DIN EN 60747-5-2

They are available in 8-pin and narrow-body SOIC package and are specified over the temperature range of -40°C to +100° C.
• 16 Pin narrow-body SOIC package for triple and quad channel
• -40 to 100°C temperature range

CAUTION It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation, which may be induced by ESD.

Device Selection Guide

Device Number Channel Configuration

ACSL-6210

Dual,

ACSL-6300*

Triple, All-in-One

ACSL-6310*

Triple, Bi-Directional, 2/1

ACSL-6400

Quad, All-in-One

ACSL-6410*

Quad, Bi-Directional, 3/1

ACSL-6420*

Quad, Bi-Directional, 2/2
* Advanced Information

Package
8-pin Small Outline 16-pin Small Outline 16-pin Small Outline 16-pin Small Outline 16-pin Small Outline 16-pin Small Outline
Ordering Information

ACSL-6XX0-X Y Z E

Channel Configuration Refer to the Device Selection Guide

Lead Free Option

R = SO-8 Package, 100 units per tube T = SO-16 Package, 50 units per tube
6 = IEC/EN/DIN EN 60747-5-2, VIORM = 560V peak Option
5 = Tape and Reel Packaging Option, 1500 units per reel for SO-8 Package and 1000 units per reel for SO-16 Package

Pin Description

VDD1 VDD2 ANODEx CATHODEx

Power Supply 1 Power Supply 2 LED Anode LED Cathode

GND1 GND2 NC VOX

Power Supply Ground 1 Power Supply Ground 2 Not Connected Output Signal

Truth Table Positive Logic

OUTPUT

Functional Diagrams ACSL-6210 - Dual-Ch, Bi-Dir

ACSL-6300 - Triple-Ch, All-in-One*

ACSL-6310 - Triple-Ch, Bi-Dir 2/1 *

ACSL-6400 - Quad-Ch, All-in-One

ACSL-6410 - Quad-Ch, Bi-Dir 3/1 *

ACSL-6420 - Quad-Ch, Bi-Dir 2/2 *
* Advanced Information 3

Schematic Diagrams

The ACSL-6xx0 series optocouplers feature the GaAsP LEDs with proprietary back emission design. They offer the designer a broad range of input drive current, from 7 mA to 15 mA, thus providing greater flexibility in designing the drive circuit.

The output detector integrated circuit IC in the optocoupler consists of a photodiode at the input of a two-stage amplifier that provides both high gain and high bandwidth. The secondary amplifier stage of the detector IC feeds into an open collector Schottky-clamped transistor.

The entire output circuit is electrically shielded so that any commonmode transient capacitively coupled from the LED side of the optocoupler is diverted from the photodiode to ground. With this electric shield, the optocoupler can withstand transients that slopes up to 10,000V/µs, and amplitudes up to 1,000V.

ACSL-6210 - Dual-Ch, Bi-Dir

GND1

CATHODE2

Shield
2 Vo1
3 VDD1
4 ANODE2

Shield
8 ANODE1

VDD2 6

GND2

CATHODE1

ACSL-6310 - Triple-Ch, Bi-Dir 2/1 *
1 GND1

Shield
3 Vo3
More datasheets: EPS150160U-P5P-KH | FFPF05U120STTU | FFPF05U120STU | 24-21UBC/C430/TR8 | ACSL-6400-56T | ACSL-6400-50T | ACSL-6210-56R | ACSL-6210-50R | ACSL-6400-00T | ACSL-6210-06R


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ACSL-6400-06T Datasheet file may be downloaded here without warranties.

Datasheet ID: ACSL-6400-06T 519917