ACSL-6xx0 Multi-Channel and Bi-Directional, 15 MBd Digital Logic Gate Optocoupler
Part | Datasheet |
---|---|
![]() |
ACSL-6210-06R (pdf) |
Related Parts | Information |
---|---|
![]() |
ACSL-6400-56T |
![]() |
ACSL-6400-50T |
![]() |
ACSL-6210-56R |
![]() |
ACSL-6210-50R |
![]() |
ACSL-6400-00T |
![]() |
ACSL-6400-06T |
PDF Datasheet Preview |
---|
ACSL-6xx0 Multi-Channel and Bi-Directional, 15 MBd Digital Logic Gate Optocoupler Data Sheet Description ACSL-6xx0 are truly isolated, multi-channel and bi-directional, high-speed optocouplers. Integration of multiple optocouplers in monolithic form is achieved through patented process technology. These devices provide full duplex and bi-directional isolated data transfer and communication capability in compact surface mount packages. Available in 15 Mbd speed option and wide supply voltage range. These high channel density make them ideally suited to isolating data conversion devices, parallel buses and peripheral interfaces. Applications • Full duplex communication • Isolated line receiver • Computer-peripheral interfaces • Microprocessor system interfaces • Digital isolation for A/D and D/A conversion • Switching power supply • Instrument input/output isolation • Ground loop elimination • Pulse transformer replacement Features • Available in dual, triple and quad channel configurations • Bi-directional • Wide supply voltage range 3.0V to 5.5V • High-speed 15 MBd typical, 10 MBd minimum • 10 kV/µs minimum Common Mode Rejection CMR at Vcm = 1000 V • LSTTL/TTL compatible • Safety and regulatory approvals Pending 2500Vrms for 1 min per UL1577 CSA Component Acceptance IEC/EN/DIN EN 60747-5-2 They are available in 8-pin and narrow-body SOIC package and are specified over the temperature range of -40°C to +100° C. • 16 Pin narrow-body SOIC package for triple and quad channel • -40 to 100°C temperature range CAUTION It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation, which may be induced by ESD. Device Selection Guide Device Number Channel Configuration ACSL-6210 Dual, ACSL-6300* Triple, All-in-One ACSL-6310* Triple, Bi-Directional, 2/1 ACSL-6400 Quad, All-in-One ACSL-6410* Quad, Bi-Directional, 3/1 ACSL-6420* Quad, Bi-Directional, 2/2 * Advanced Information Package 8-pin Small Outline 16-pin Small Outline 16-pin Small Outline 16-pin Small Outline 16-pin Small Outline 16-pin Small Outline Ordering Information ACSL-6XX0-X Y Z E Channel Configuration Refer to the Device Selection Guide Lead Free Option R = SO-8 Package, 100 units per tube T = SO-16 Package, 50 units per tube 6 = IEC/EN/DIN EN 60747-5-2, VIORM = 560V peak Option 5 = Tape and Reel Packaging Option, 1500 units per reel for SO-8 Package and 1000 units per reel for SO-16 Package Pin Description VDD1 VDD2 ANODEx CATHODEx Power Supply 1 Power Supply 2 LED Anode LED Cathode GND1 GND2 NC VOX Power Supply Ground 1 Power Supply Ground 2 Not Connected Output Signal Truth Table Positive Logic OUTPUT Functional Diagrams ACSL-6210 - Dual-Ch, Bi-Dir ACSL-6300 - Triple-Ch, All-in-One* ACSL-6310 - Triple-Ch, Bi-Dir 2/1 * ACSL-6400 - Quad-Ch, All-in-One ACSL-6410 - Quad-Ch, Bi-Dir 3/1 * ACSL-6420 - Quad-Ch, Bi-Dir 2/2 * * Advanced Information 3 Schematic Diagrams The ACSL-6xx0 series optocouplers feature the GaAsP LEDs with proprietary back emission design. They offer the designer a broad range of input drive current, from 7 mA to 15 mA, thus providing greater flexibility in designing the drive circuit. The output detector integrated circuit IC in the optocoupler consists of a photodiode at the input of a two-stage amplifier that provides both high gain and high bandwidth. The secondary amplifier stage of the detector IC feeds into an open collector Schottky-clamped transistor. The entire output circuit is electrically shielded so that any commonmode transient capacitively coupled from the LED side of the optocoupler is diverted from the photodiode to ground. With this electric shield, the optocoupler can withstand transients that slopes up to 10,000V/µs, and amplitudes up to 1,000V. ACSL-6210 - Dual-Ch, Bi-Dir GND1 CATHODE2 Shield 2 Vo1 3 VDD1 4 ANODE2 Shield 8 ANODE1 VDD2 6 GND2 CATHODE1 ACSL-6310 - Triple-Ch, Bi-Dir 2/1 * 1 GND1 Shield 3 Vo3 |
More datasheets: 18810 | EPS150160U-P5P-KH | FFPF05U120STTU | FFPF05U120STU | 24-21UBC/C430/TR8 | ACSL-6400-56T | ACSL-6400-50T | ACSL-6210-56R | ACSL-6210-50R | ACSL-6400-00T |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ACSL-6210-06R Datasheet file may be downloaded here without warranties.