ACPM-7382 UMTS Band1 1920-1980MHz 4x4 Power Amplifier Module
Part | Datasheet |
---|---|
![]() |
ACPM-7382-TR1 (pdf) |
Related Parts | Information |
---|---|
![]() |
ACPM-7382-BLK |
PDF Datasheet Preview |
---|
ACPM-7382 UMTS Band1 1920-1980MHz 4x4 Power Amplifier Module Data Sheet The ACPM-7382 is a fully matched 10-pin surface mount module developed for UMTS Band1. This power amplifier module operates in the 1920-1980MHz bandwidth. The ACPM-7382 meets stringent UMTS linearity requirements up to 28.25dBm output power. The 4mmx4mm form factor package is self contained, incorporating 50ohm input and output matching networks The ACPM-7382 features 5th generation of CoolPAM circuit technology which supports 3 power modes bypass, mid and high power modes. The CoolPAM is stage bypass technology enhancing PAE power added efficiency at low and medium power range. Active bypass feature is added to 5th generation to enhance PAE further at low output range. This helps to extend talk time. The power amplifier is manufactured on an advanced InGaP HBT hetero-junction Bipolar Transistor MMIC microwave monolithic integrated circuit technology offering state-of-the-art reliability, temperature stability and ruggedness. Block Diagram • Thin Package 0.9mm typ • Excellent Linearity • 3-mode power control with Vbp and Vmode Bypass / Mid Power Mode / High Power Mode • High Efficiency at max output power • 10-pin surface mounting package • Internal 50ohm matching networks for both RF input and output • Lead-free, RoHS compliant, Green • UMTS Band1 Ordering Information Part Number ACPM-7382-TR1 ACPM-7382-BLK Number of Devices 1,000 Container 178mm 7” Tape/Reel BULK Absolute Maximum Ratings No damage assuming only one parameter is set at limit at a time with all other parameters set at or below nominal value. Operation of any single parameter outside these conditions with the remaining parameters set at or below nominal values may result in permanent damage Min. Typ. RF Input Power Pin DC Supply Voltage Vcc1, Vcc2 Enable Voltage Ven Mode Control Voltage Vmode Bypass Control Vbp Storage Temperature Tstg * High Power Mode 5dBm for Bypass and Mid Power Mode Max. Unit +125 Recommended Operating Condition Min. Typ. DC Supply Voltage Vcc1, Vcc2 Enable Voltage Ven Low High Mode Control Voltage Vmode High Bypass Control Voltage Vbp High Operating Frequency fo 1920 Ambient Temperature Ta Max. Unit 1980 Operating Logic Table Power Mode High Power Mode Mid Power Mode Bypass Mode Shut Down Mode Ven High Low Vmode High High High Pout Rel99 ~ dBm ~ 17 dBm ~ 8 dBm - |
More datasheets: VC-TXO-39SM-100-TR | VC-TXO-39SM-130-TR | 10074998-118MCALF | 10074998-118MCASLF | Q48SK12018NRFA | AT91SAM9G45B-CU | AT91SAM9G45C-CU | AT91SAM9G45C-CU-999 | AT91SAM9G45B-CU-999 | ACPM-7382-BLK |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ACPM-7382-TR1 Datasheet file may be downloaded here without warranties.