ACPM-7355-TR1

ACPM-7355-TR1 Datasheet

ACPM-7355 UMTS Dual-Band 4x5mm Power Module Band2/Band5

Part	Datasheet
ACPM-7355-TR1	ACPM-7355-TR1 (pdf)

Related Parts	Information
ACPM-7355-BLK	ACPM-7355-BLK

PDF Datasheet Preview
ACPM-7355 UMTS Dual-Band 4x5mm Power Module Band2/Band5 Data Sheet The ACPM-7355 is a dual-band PAM Power Module designed for UMTS Band2 and Band5. The ACPM7355 meets stringent UMTS linearity requirements. The 4mmx5mm form factor 14-pin surface mount package is self contained, incorporating 50ohm input and output matching networks The ACPM-7355 features 5th generation of CoolPAM circuit technology which supports 3 modes bypass, mid and high power modes. The CoolPAM is stage bypass technology which enables power to lower power consumption. Active bypass feature is added to 5th generation to enhance power added at low output range and this technology extends talk time of mobiles more by further saving power current consumption. The power is manufactured on an advanced InGaP HBT hetero-junction Bipolar Transistor MMIC microwave monolithic integrated circuit technology state-of-the-art reliability, temperature stability and ruggedness. The Module is housed in a cost small and thin 4x5mm package. x Dual-Band PA Band2 and Band5 x Small Size 4x5mm x Thin Package 1.0mm typ x Excellent Linearity x 3-mode power control x Bypass / Mid Power Mode / High Power Mode High at max output power x 14-pin surface mounting package x Internal 50ohm matching networks for both RF input and output x Lead-free, RoHS compliant, Green x UMTS Band2 and Band5 Ordering Information Part Number ACPM-7355-TR1 ACPM-7355-BLK Number of Devices 1000 Container 178mm 7” Tape/Reel Bulk Block Diagram Bypass Circuit Impedance Transformer RFin_LB Vcc1 Ven_LB Ven_HB Input Match & Power Divider Bias Circuit & Control Logic Output Match RFout_LB Vcc2 Vmode Vbp RFin_HB Input Match & Power Divider Output Match RFout_HB Bypass Circuit Impedance Transformer Absolute Maximum Ratings No damage assuming only one parameter is set at limit at a time with all other parameters set at or below typical value. Operation of any single parameter outside these conditions with the remaining parameters set at or below typical values may result in permanent damage. Unit Associated Pins RF Input Power high power mode Output power bypass mode Output power mid power mode RFIn_Hi, RFIn_Low RFOut_Hi, RFOut_Low RFOut_Hi, RFOut_Low DC Supply Voltage Vcc1, Vcc2 Enable Voltage Ven_Low, Ven_Hi Mode Control Voltage Vmode Bypass Control Storage Temperature +125 Recommended Operating Condition Description DC Supply Voltage Enable Voltage Ven_Low, Ven_Hi Mode Control Voltage Vmode

PDF Datasheet Preview

ACPM-7355 UMTS Dual-Band 4x5mm Power Module Band2/Band5

Data Sheet

The ACPM-7355 is a dual-band PAM Power Module designed for UMTS Band2 and Band5. The ACPM7355 meets stringent UMTS linearity requirements. The 4mmx5mm form factor 14-pin surface mount package is self contained, incorporating 50ohm input and output matching networks

The ACPM-7355 features 5th generation of CoolPAM circuit technology which supports 3 modes bypass, mid and high power modes. The CoolPAM is stage bypass technology which enables power to lower power consumption. Active bypass feature is added to 5th generation to enhance power added at low output range and this technology extends talk time of mobiles more by further saving power current consumption.

The power is manufactured on an advanced InGaP HBT hetero-junction Bipolar Transistor MMIC microwave monolithic integrated circuit technology state-of-the-art reliability, temperature stability and ruggedness.

The Module is housed in a cost small and thin 4x5mm package.
x Dual-Band PA Band2 and Band5 x Small Size 4x5mm x Thin Package 1.0mm typ x Excellent Linearity x 3-mode power control x Bypass / Mid Power Mode / High Power Mode

High at max output power x 14-pin surface mounting package x Internal 50ohm matching networks for both RF input
and output x Lead-free, RoHS compliant, Green
x UMTS Band2 and Band5
Ordering Information

Part Number ACPM-7355-TR1 ACPM-7355-BLK

Number of Devices 1000

Container 178mm 7” Tape/Reel Bulk

Block Diagram

Bypass Circuit

Impedance Transformer

RFin_LB

Vcc1 Ven_LB Ven_HB

Input Match & Power Divider

Bias Circuit & Control Logic

Output Match

RFout_LB

Vcc2 Vmode Vbp

RFin_HB

Input Match & Power Divider

Output Match

RFout_HB

Bypass Circuit

Impedance Transformer

Absolute Maximum Ratings

No damage assuming only one parameter is set at limit at a time with all other parameters set at or below typical value.

Operation of any single parameter outside these conditions with the remaining parameters set at or below typical values may result in permanent damage.

Unit

Associated Pins

RF Input Power high power mode Output power bypass mode Output power mid power mode

RFIn_Hi, RFIn_Low

RFOut_Hi, RFOut_Low

RFOut_Hi, RFOut_Low

DC Supply Voltage

Vcc1, Vcc2

Enable Voltage

Ven_Low, Ven_Hi

Mode Control Voltage

Vmode

Bypass Control

Storage Temperature
+125

Recommended Operating Condition

Description DC Supply Voltage Enable Voltage Ven_Low, Ven_Hi

Mode Control Voltage Vmode

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ACPM-7355-TR1 Datasheet file may be downloaded here without warranties.

Datasheet ID: ACPM-7355-TR1 519882