ACPM-5201-TR1G

ACPM-5201-TR1G Datasheet

ACPM-5201 UMTS Band1 1920-1980MHz 3x3mm Power Module

Part	Datasheet
ACPM-5201-TR1G	ACPM-5201-TR1G (pdf)

PDF Datasheet Preview
ACPM-5201 UMTS Band1 1920-1980MHz 3x3mm Power Module Data Sheet The ACPM-5201 is a fully matched 10-pin surface mount module developed for UMTS Band1. This power module operates in the 1920-1980MHz bandwidth. The ACPM-5201 meets stringent UMTS linearity requirements up to 27.5dBm output power. The 3mmx3mm form factor package is self contained, incorporating 50ohm input and output matching networks. The PA also contains internal DC blocking capacitors for RF input and output ports. The ACPM-5201 features 5th generation of CoolPAM CoolPAM5 circuit technology which supports 3 power modes active bypass, mid power and high power modes. The CoolPAM is stage bypass technology enhancing PAE power added at low and medium power range. The active bypass feature is added to CoolPAM5 to enhance the PAE further at low output range and it enables the PA to have exceptionally low quiescent current. It dramatically saves the average power consumption and accordingly extends the talk time of mobiles and prolongs a battery life. A directional coupler is integrated into the module and both coupling and isolation ports are available externally, supporting daisy chain. The integrated coupler has excellent coupler directivity, which minimizes the coupled output power variation or delivered power variation caused by the load mismatch from the antenna. The coupler directivity, or the output power variation into the mismatched load, is critical to the TRP and SAR performance of the mobile phones in real operations as well as compliance tests for the system The ACPM-5201 has integrated on-chip Vref and on-module bias switch as the one of the key features of the CoolPAM5, so an external constant voltage source is not required, eliminating the external LDO regulators and switches from circuit boards of mobile devices. It also makes the PA fully digital-controllable by the Ven pin that simply turns the PA on and from the digital control logic input from baseband chipsets. All of the digital control input pins such as the Ven, Vmode and Vbp are fully CMOS compatible and can operate down to the 1.35V logic. The current consumption by digital control pins is negligible. The power is manufactured on an advanced InGaP HBT hetero-junction Bipolar Transistor MMIC microwave monolithic integrated circuit technology state-of-the-art reliability, temperature stability and ruggedness. • Thin Package 1.0mm typ • Excellent Linearity • 3-mode power control with Vbp and Vmode Bypass / Mid Power Mode / High Power Mode • High at max output power • 10-pin surface mounting package • Internal 50ohm matching networks for both RF input and output • Integrated coupler Coupler and Isolation ports for daisy chain • Green Lead-free and RoHS compliant • UMTS Band1 Ordering Information Part Number ACPM-5201-TR1 ACPM-5201-BLK Number of Devices 1000 Container 178mm 7” Tape/Reel Bulk Absolute Maximum Ratings No damage assuming only one parameter is set at limit at a time with all other parameters set at or below nominal value. Operation of any single parameter outside these conditions with the remaining parameters set at or below nominal values may result in permanent damage. Description RF Input Power Pin RF Output Power Pout High power mode Mid power mode Bypass mode DC Supply Voltage Vcc1, Vcc2 Enable Voltage Ven Mode Control Voltage Vmode Bypass Control Vbp Storage Temperature Tstg Min. Typ. Max. Unit dBm 29 19 13 +125 Recommended Operating Condition Min. Typ. DC Supply Voltage Vcc1, Vcc2 Enable Voltage Ven High Mode Control Voltage Vmode High Bypass Control Voltage Vbp High Operating Frequency fo 1920 Ambient Temperature Ta Max. Unit 1980 Operating Logic Table Power Mode High Power Mode High Mid Power Mode High Bypass Mode High

PDF Datasheet Preview

ACPM-5201 UMTS Band1 1920-1980MHz 3x3mm Power Module

Data Sheet

The ACPM-5201 is a fully matched 10-pin surface mount module developed for UMTS Band1. This power module operates in the 1920-1980MHz bandwidth. The ACPM-5201 meets stringent UMTS linearity requirements up to 27.5dBm output power. The 3mmx3mm form factor package is self contained, incorporating 50ohm input and output matching networks. The PA also contains internal DC blocking capacitors for RF input and output ports.

The ACPM-5201 features 5th generation of CoolPAM CoolPAM5 circuit technology which supports 3 power modes active bypass, mid power and high power modes. The CoolPAM is stage bypass technology enhancing PAE power added at low and medium power range. The active bypass feature is added to CoolPAM5 to enhance the PAE further at low output range and it enables the PA to have exceptionally low quiescent current. It dramatically saves the average power consumption and accordingly extends the talk time of mobiles and prolongs a battery life.

A directional coupler is integrated into the module and both coupling and isolation ports are available externally, supporting daisy chain. The integrated coupler has excellent coupler directivity, which minimizes the coupled output power variation or delivered power variation caused by the load mismatch from the antenna. The coupler directivity, or the output power variation into the mismatched load, is critical to the TRP and SAR performance of the mobile phones in real operations as well as compliance tests for the system

The ACPM-5201 has integrated on-chip Vref and on-module bias switch as the one of the key features of the CoolPAM5, so an external constant voltage source is not required, eliminating the external LDO regulators and switches from circuit boards of mobile devices. It also makes the PA fully digital-controllable by the Ven pin that simply turns the PA on and from the digital control logic input from baseband chipsets. All of the digital control input pins such as the Ven, Vmode and Vbp are fully CMOS compatible and can operate down to the 1.35V logic. The current consumption by digital control pins is negligible.

The power is manufactured on an advanced InGaP HBT hetero-junction Bipolar Transistor MMIC microwave monolithic integrated circuit technology state-of-the-art reliability, temperature stability and ruggedness.
• Thin Package 1.0mm typ
• Excellent Linearity
• 3-mode power control with Vbp and Vmode

Bypass / Mid Power Mode / High Power Mode
• High at max output power
• 10-pin surface mounting package
• Internal 50ohm matching networks for both RF input
and output
• Integrated coupler

Coupler and Isolation ports for daisy chain
• Green Lead-free and RoHS compliant
• UMTS Band1
Ordering Information

Part Number ACPM-5201-TR1

ACPM-5201-BLK

Number of Devices 1000

Container 178mm 7” Tape/Reel

Bulk

Absolute Maximum Ratings

No damage assuming only one parameter is set at limit at a time with all other parameters set at or below nominal value.

Operation of any single parameter outside these conditions with the remaining parameters set at or below nominal values may result in permanent damage.

Description RF Input Power Pin RF Output Power Pout

High power mode Mid power mode Bypass mode DC Supply Voltage Vcc1, Vcc2 Enable Voltage Ven Mode Control Voltage Vmode Bypass Control Vbp Storage Temperature Tstg

Min.

Typ.

Max.

Unit
dBm 29 19 13
+125

Recommended Operating Condition

Min.

Typ.

DC Supply Voltage Vcc1, Vcc2

Enable Voltage Ven

High

Mode Control Voltage Vmode

High

Bypass Control Voltage Vbp

High

Operating Frequency fo
1920

Ambient Temperature Ta

Max.

Unit
1980

Operating Logic Table

Power Mode

High Power Mode

High

Mid Power Mode

High

Bypass Mode

High

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ACPM-5201-TR1G Datasheet file may be downloaded here without warranties.

Datasheet ID: ACPM-5201-TR1G 519872