ACPM-5002-TC1

ACPM-5002-TC1 Datasheet

ACPM-5002-TR1 Multimode PA - UMTS Band2, LTE Band25 and CDMA PCS 3x3mm Power Amplifier Module with Coupler

Part	Datasheet
ACPM-5002-TC1	ACPM-5002-TC1 (pdf)

Related Parts	Information
ACPM-5002-TR1	ACPM-5002-TR1
ACPM-5002-SG1	ACPM-5002-SG1

PDF Datasheet Preview
ACPM-5002-TR1 Multimode PA - UMTS Band2, LTE Band25 and CDMA PCS 3x3mm Power Amplifier Module with Coupler Data Sheet The ACPM-5002-TR1 is a fully matched 10-pin surface mount module developed to support multimode applications including UMTS Band2 1850-1910MHz and CDMA PCS band including BC14 1850-1915MHz . The ACPM-5002-TR1 meets stringent linearity requirements up to 28.6dBm output power for UMTS Rel.99 and 28.0dBm for CDMA. The 3mmx3mm form factor package is self contained, incorporating 50ohm input and output matching networks. The PA also contains internal DC blocking capacitors for RF input and output ports. The ACPM-5002-TR1 features 5th generation of CoolPAM CoolPAM5 circuit technology which supports 3 power modes active bypass, mid power and high power modes. The CoolPAM is stage bypass technology enhancing PAE power added efficiency at low and medium power range. The active bypass feature is added to CoolPAM5 to enhance the PAE further at low output range and it enables the PA to have exceptionally low quiescent current. It dramatically saves the average power consumption and accordingly extends the talk time of mobiles and prolongs a battery life. A directional coupler is integrated into the module and both coupling and isolation ports are available externally, supporting daisy chain. The integrated coupler has excellent coupler directivity, which minimizes the coupled output power variation or delivered power variation caused by the load mismatch from the antenna. The coupler directivity, or the output power variation into the mismatched load, is critical to the TRP and SAR performance of the mobile phones in real field operations as well as compliance tests for the system specifications. The ACPM-5002 has integrated on-chip Vref and on-module bias switch as the one of the key features of the CoolPAM-5, so an external constant voltage source is not required, eliminating the external LDO regulators and switches from circuit boards of mobile devices. It also makes the PA fully digital-controllable by the Ven pin that simply turns the PA on and off from the digital control logic input from baseband chipsets. All of the digital control input pins • Thin Package 0.9mm typ • Excellent Linearity • 3-mode power control with Vbp and Vmode Bypass / Mid Power Mode / High Power Mode • High Efficiency at max output power • 10-pin surface mounting package • Internal 50ohm matching networks for both RF input and output • Integrated coupler Coupler and Isolation ports for daisy chain • Lead-free, RoHS compliant, Green • UMTS Band2 • LTE Band25 • CDMA PCS BC1 and BC14 Ordering Information Part Number ACPM-5002-TR1 ACPM-5002-BLK Number of Devices 1000 Container 178mm 7” Tape/Reel Bulk Description Cont. such as the Ven, Vmode and Vbp are fully CMOS compatible and can operate down to the 1.35V logic. The current consumption by digital control pins is negligible. The power amplifier is manufactured on an advanced InGaP HBT hetero-junction Bipolar Transistor MMIC microwave monolithic integrated circuit technology offering state-of-the-art reliability, temperature stability and ruggedness. Absolute Maximum Ratings No damage assuming only one parameter is set at limit at a time with all other parameters set at or below nominal value. Operation of any single parameter outside these conditions with the remaining parameters set at or below nominal values may result in permanent damage. Description RF Input Power Pin DC Supply Voltage Vcc1, Vcc2 Enable Voltage Ven Mode Control Voltage Vmode Bypass Control Vbp Storage Temperature Tstg Min. Typ. Max. Unit +125 Recommended Operating Condition Min. Typ. DC Supply Voltage Vcc1, Vcc2 Enable Voltage Ven High Mode Control Voltage Vmode High Bypass Control Voltage Vbp High Operating Frequency fo UMTS CDMA 1850 Ambient Temperature Ta UMTS CDMA Max. Unit 1910 1915 Operating Logic Table Power Mode High Power Mode Mid Power Mode Bypass Mode Shut Down Mode Vmode Pout Rel99 High ~ dBm

PDF Datasheet Preview

ACPM-5002-TR1 Multimode PA - UMTS Band2, LTE Band25 and CDMA PCS 3x3mm Power Amplifier Module with Coupler

Data Sheet

The ACPM-5002-TR1 is a fully matched 10-pin surface mount module developed to support multimode applications including UMTS Band2 1850-1910MHz and CDMA PCS band including BC14 1850-1915MHz . The ACPM-5002-TR1 meets stringent linearity requirements up to 28.6dBm output power for UMTS Rel.99 and 28.0dBm for CDMA. The 3mmx3mm form factor package is self contained, incorporating 50ohm input and output matching networks. The PA also contains internal DC blocking capacitors for RF input and output ports.

The ACPM-5002-TR1 features 5th generation of CoolPAM CoolPAM5 circuit technology which supports 3 power modes active bypass, mid power and high power modes. The CoolPAM is stage bypass technology enhancing PAE power added efficiency at low and medium power range. The active bypass feature is added to CoolPAM5 to enhance the PAE further at low output range and it enables the PA to have exceptionally low quiescent current. It dramatically saves the average power consumption and accordingly extends the talk time of mobiles and prolongs a battery life.

A directional coupler is integrated into the module and both coupling and isolation ports are available externally, supporting daisy chain. The integrated coupler has excellent coupler directivity, which minimizes the coupled output power variation or delivered power variation caused by the load mismatch from the antenna. The coupler directivity, or the output power variation into the mismatched load, is critical to the TRP and SAR performance of the mobile phones in real field operations as well as compliance tests for the system specifications.

The ACPM-5002 has integrated on-chip Vref and on-module bias switch as the one of the key features of the CoolPAM-5, so an external constant voltage source is not required, eliminating the external LDO regulators and switches from circuit boards of mobile devices. It also makes the PA fully digital-controllable by the Ven pin that simply turns the PA on and off from the digital control logic input from baseband chipsets. All of the digital control input pins
• Thin Package 0.9mm typ
• Excellent Linearity
• 3-mode power control with Vbp and Vmode

Bypass / Mid Power Mode / High Power Mode
• High Efficiency at max output power
• 10-pin surface mounting package
• Internal 50ohm matching networks for both RF input
and output
• Integrated coupler

Coupler and Isolation ports for daisy chain
• Lead-free, RoHS compliant, Green
• UMTS Band2
• LTE Band25
• CDMA PCS BC1 and BC14
Ordering Information

Part Number ACPM-5002-TR1 ACPM-5002-BLK

Number of Devices 1000

Container 178mm 7” Tape/Reel Bulk

Description Cont.
such as the Ven, Vmode and Vbp are fully CMOS compatible and can operate down to the 1.35V logic. The current consumption by digital control pins is negligible.

The power amplifier is manufactured on an advanced InGaP HBT hetero-junction Bipolar Transistor MMIC microwave monolithic integrated circuit technology offering state-of-the-art reliability, temperature stability and ruggedness.

Absolute Maximum Ratings No damage assuming only one parameter is set at limit at a time with all other parameters set at or below nominal value.

Operation of any single parameter outside these conditions with the remaining parameters set at or below nominal values may result in permanent damage.

Description RF Input Power Pin DC Supply Voltage Vcc1, Vcc2 Enable Voltage Ven Mode Control Voltage Vmode Bypass Control Vbp Storage Temperature Tstg

Min.

Typ.

Max.

Unit
+125

Recommended Operating Condition

Min.

Typ.

DC Supply Voltage Vcc1, Vcc2

Enable Voltage Ven

High

Mode Control Voltage Vmode

High

Bypass Control Voltage Vbp

High

Operating Frequency fo

UMTS CDMA
1850

Ambient Temperature Ta

UMTS

CDMA

Max.

Unit
1910
1915

Operating Logic Table

Power Mode High Power Mode Mid Power Mode Bypass Mode Shut Down Mode

Vmode

Pout Rel99

High
~ dBm

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ACPM-5002-TC1 Datasheet file may be downloaded here without warranties.

Datasheet ID: ACPM-5002-TC1 519867