3630

3630 Datasheet


PRODUCT ID 3630

Part Datasheet
3630 3630 3630 (pdf)
PDF Datasheet Preview
Adafruit NeoPixel LED Dots Strand 20 LEDs at 2" Pitch

PRODUCT ID 3630

Attaching NeoPixel strips to your costume can be a struggle as the flexible PCBs can crack when bent too much. So how to add little dots of color? Use these stranded NeoPixel dots! They're very small, so they're easy to embed into any structure, costume, or wearable. Each dot is enclosed in a small plastic weatherproof button, we don't recommend dunking these underwater but they can survive temporary outdoor usage. Best of all the buttons have little plastic hooks molded into the back so they can be in place.

Each strand has 20 dots with a single NeoPixel inside with cabling connecting them. The dots are 2" apart, we also have a version that is 4" apart.

NeoPixels are LEDs with an embedded microcontroller inside the LED. You can set the brightness of each R/G/B/W. Each LED acts like a shift register, reading incoming data on the input pins, and then shifting the previous data out on the output pin. By sending a long string of data, you can control an infinite number of LEDs, just tack on more or disconnect unwanted LEDs at the end. The PWM is built into each so once you set the brightness you can stop talking to the strip and it will continue to PWM all the LEDs for you.

These NeoPixel strands have 20 pixel LEDs per meter. We have a tutorial showing wiring, power usage calculations, example code for usage, etc. Please check it out!
More datasheets: 201419 VI001 | 201419 VI309 | 201419 WH001 | 201419 YL001 | 201419 YL309 | 201419 OR309 | 201419 BK309 | 201419 BL001 | 201419 BK001 | 15-006253


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 3630 Datasheet file may be downloaded here without warranties.

Datasheet ID: 3630 513207