ACMD-6107-SG1

ACMD-6107-SG1 Datasheet

ACMD-6107 LTE Band 7 Duplexer

Part	Datasheet
ACMD-6107-SG1	ACMD-6107-SG1 (pdf)

Related Parts	Information
ACMD-7405-TS1	ACMD-7405-TS1
ACMD-6107-SY1	ACMD-6107-SY1
ACMD-7405-TR1	ACMD-7405-TR1
ACMD-6107-BLK	ACMD-6107-BLK
ACMD-6107-TR1	ACMD-6107-TR1

PDF Datasheet Preview
ACMD-6107 LTE Band 7 Duplexer The Avago ACMD-6107 is a highly miniaturized duplexer designed for use in LTE Band 7 2500 2570 MHz UL, 2620 2690 MHz DL handsets and mobile data terminals. Low Insertion Loss in the Tx channel minimizes current drain from the power amplifier, while low Rx channel Insertion Loss improves receiver sensitivity. The ACMD-6107 enhances the sensitivity and dynamic range of handset receivers by providing high isolation of the transmitted signal from the receiver input and high rejection of transmit-generated noise in the receive band. The ACMD-6107 is designed with Avago Technologies’ innovative Film Bulk Acoustic Resonator FBAR technology, which makes possible ultra-small, high-Q filters at a fraction of their usual size. The excellent power handling capability of FBAR bulk-mode resonators supports the high output power levels used in mobile communications applications, while adding virtually no distortion. The ACMD-6107 also utilizes Avago Technologies’ advanced Microcap bonded-wafer, chip scale packaging technology. This process allows the filters to be assembled into a molded chip-on-board module with an overall size of only x mm and maximum height of mm. The ACMD-6107 is compatible with standard x mm duplexer PCB footprints. Functional Block Diagram Ant Port 3 Pin 6 • Miniature Size - x mm size - mm max height - Standard x mm PCB footprint • High Isolation • High Power Rating - 33 dBm Abs Max Tx Power • Environmental - RoHS Compliant - Halogen free - TBBPA Free Specifications • Rx Band Performance, 2620-2690 MHz, 20 to +85°C - Insertion Loss dB Max - Rx Noise Blocking 48 dB Min • Tx Band Performance, 2500-2570 MHz, 20 to +85°C - Insertion Loss dB Max - Tx Interferer Blocking 54 dB Min LTE Handsets or data terminals operating in the Band 7 frequency range. Rx Port 2 Pin 1 Tx Port 1 Pin 3 GND PIN 1 MARK TOP VIEW Notes Dimensions in millimeters Tolerance X.XX ± mm X.XXX ± mm Dimensions nominal unless otherwise noted Angles 45° nominal Contact areas are gold plated Figure Package Outline Drawing. SIDE VIEW ALL AROUND BOTTOM VIEW Pin Connections: 2, 4, 5, 7, 9 Gnd Ordering Information Part Number ACMD-6107-BLK ACMD-6107-TR1 No. of Devices 100 3000 Container Tape Strip or Anti-static Bag 178 mm 7-inch Reel For product information and a complete list of distributors, please go to our web site: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2012 Avago Technologies. All rights reserved. AV02-3907EN - November 6, 2012

PDF Datasheet Preview

ACMD-6107 LTE Band 7 Duplexer

The Avago ACMD-6107 is a highly miniaturized duplexer designed for use in LTE Band 7 2500 2570 MHz UL, 2620 2690 MHz DL handsets and mobile data terminals.

Low Insertion Loss in the Tx channel minimizes current drain from the power amplifier, while low Rx channel Insertion Loss improves receiver sensitivity.

The ACMD-6107 enhances the sensitivity and dynamic range of handset receivers by providing high isolation of the transmitted signal from the receiver input and high rejection of transmit-generated noise in the receive band.

The ACMD-6107 is designed with Avago Technologies’ innovative Film Bulk Acoustic Resonator FBAR technology, which makes possible ultra-small, high-Q filters at a fraction of their usual size. The excellent power handling capability of FBAR bulk-mode resonators supports the high output power levels used in mobile communications applications, while adding virtually no distortion.

The ACMD-6107 also utilizes Avago Technologies’ advanced Microcap bonded-wafer, chip scale packaging technology. This process allows the filters to be assembled into a molded chip-on-board module with an overall size of only x mm and maximum height of mm. The ACMD-6107 is compatible with standard x mm duplexer PCB footprints.

Functional Block Diagram

Ant Port 3 Pin 6
• Miniature Size - x mm size - mm max height - Standard x mm PCB footprint
• High Isolation
• High Power Rating
- 33 dBm Abs Max Tx Power
• Environmental
- RoHS Compliant - Halogen free - TBBPA Free

Specifications
• Rx Band Performance, 2620-2690 MHz, 20 to +85°C - Insertion Loss dB Max - Rx Noise Blocking 48 dB Min
• Tx Band Performance, 2500-2570 MHz, 20 to +85°C - Insertion Loss dB Max - Tx Interferer Blocking 54 dB Min

LTE Handsets or data terminals operating in the Band 7 frequency range.

Rx Port 2 Pin 1

Tx Port 1 Pin 3

GND PIN 1 MARK

TOP VIEW

Notes Dimensions in millimeters Tolerance X.XX ± mm

X.XXX ± mm Dimensions nominal unless otherwise noted Angles 45° nominal Contact areas are gold plated

Figure Package Outline Drawing.

SIDE VIEW

ALL AROUND

BOTTOM VIEW

Pin Connections:
2, 4, 5, 7, 9 Gnd
Ordering Information

Part Number ACMD-6107-BLK ACMD-6107-TR1

No. of Devices 100 3000

Container Tape Strip or Anti-static Bag 178 mm 7-inch Reel

For product information and a complete list of distributors, please go to our web site:

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2012 Avago Technologies. All rights reserved. AV02-3907EN - November 6, 2012

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ACMD-6107-SG1 Datasheet file may be downloaded here without warranties.

Datasheet ID: ACMD-6107-SG1 519858