BXRC-27G10K0-L-02

BXRC-27G10K0-L-02 Datasheet


Product Data Sheet DS33 BXRC-27x10K0, 30x10K0, 35x10K0, 40x10K0, 50x1000, 56G10K0

Part Datasheet
BXRC-27G10K0-L-02 BXRC-27G10K0-L-02 BXRC-27G10K0-L-02 (pdf)
Related Parts Information
BXRC-56G10K0-L-04 BXRC-56G10K0-L-04 BXRC-56G10K0-L-04
BXRC-50E10K0-L-04 BXRC-50E10K0-L-04 BXRC-50E10K0-L-04
BXRC-50G10K0-L-04 BXRC-50G10K0-L-04 BXRC-50G10K0-L-04
BXRC-40G10K0-L-03 BXRC-40G10K0-L-03 BXRC-40G10K0-L-03
BXRC-35E10K0-L-03 BXRC-35E10K0-L-03 BXRC-35E10K0-L-03
BXRC-50C10K0-L-04 BXRC-50C10K0-L-04 BXRC-50C10K0-L-04
BXRC-30E10K0-L-03 BXRC-30E10K0-L-03 BXRC-30E10K0-L-03
BXRC-40E10K0-L-03 BXRC-40E10K0-L-03 BXRC-40E10K0-L-03
BXRC-30G10K0-L-03 BXRC-30G10K0-L-03 BXRC-30G10K0-L-03
BXRC-27E10K0-L-03 BXRC-27E10K0-L-03 BXRC-27E10K0-L-03
BXRC-27G10K0-L-03 BXRC-27G10K0-L-03 BXRC-27G10K0-L-03
BXRC-30E10K0-L-02 BXRC-30E10K0-L-02 BXRC-30E10K0-L-02
BXRC-35G10K0-L-03 BXRC-35G10K0-L-03 BXRC-35G10K0-L-03
BXRC-27E10K0-L-02 BXRC-27E10K0-L-02 BXRC-27E10K0-L-02
BXRC-40E10K0-L-02 BXRC-40E10K0-L-02 BXRC-40E10K0-L-02
BXRC-35E10K0-L-02 BXRC-35E10K0-L-02 BXRC-35E10K0-L-02
BXRC-30G10K0-L-02 BXRC-30G10K0-L-02 BXRC-30G10K0-L-02
BXRC-40G10K0-L-02 BXRC-40G10K0-L-02 BXRC-40G10K0-L-02
PDF Datasheet Preview
Bridgelux Vero 29 Array Series

Product Data Sheet DS33 BXRC-27x10K0, 30x10K0, 35x10K0, 40x10K0, 50x1000, 56G10K0

Introduction

Vero is available in four different LES light emitting surface configurations and has been engineered to reliably operate over a broad current range, enabling new degrees of flexibility in luminaire design optimization. These new arrays deliver increased lumen density to enable improved beam control and precision lighting with 2 and 3 SDCM color control standard for clean and consistent uniform lighting.

Vero includes an on board connector port to enable solder free electrical interconnect and simple easy to use mounting features to enable plug-and-play installation.
• Market leading efficacy of 120 lm/W typical and 110 lm/W minimum
• Vero 29 lumen output performance ranges from 2,500 to as much as
21,000 lumens
• Broad range of CCT options from 2700K to 5000K
• CRI options include minimum 70, 80, and 90
• 2 and 3 SDCM color control for 2700K-4000K CCT
• Reliable operation at up to 2X nominal drive current
• Radial die pattern and improved lumen density
• Thermally isolated solder pads
• Onboard connector port
• Top side part number markings
• Broad application coverage for interior and exterior lighting
• Flexibility for application driven lighting design requirements
• High quality true color reproduction
• Uniform consistent white light
• Flexibility in design optimization
• Improved optical control
• Enhanced ease of use and manufacturability
• Solder-less connectivity enables plug & play installation and field
upgradability
• Improved inventory management and quality control
101 Portola Avenue, Livermore, CA 94551
• Tel 925 583-8400
• Fax 925 583-8401


Table of Contents Product Feature Map Product Nomenclature Top Side Part Number Markings Enhanced Connectivity Options Lumen Maintenance Characteristics Environmental Compliance UL Recognition CE Recognition Minor Product Change Policy Case Temperature Measurement Point CAUTION CONTACT WITH LIGHT EMITTING SURFACE LES CAUTION CHEMICAL EXPOSURE HAZARD CAUTION EYE SAFETY CAUTION RISK OF BURN Production Selection Guide Performance at Commonly Used Drive Currents Flux & Electrical Characteristics Absolute Maximum Ratings Drive Current vs. Forward Voltage Characteristics Typical Relative Luminous Flux vs. Drive Current, Tj = 25°C Typical Light Output Characteristics vs. Temperature Typical Chromaticity Characteristics vs. Temperature Typical Radiation Pattern Wavelength Characteristics at Drive Current, Tj = 25°C Mechanical Dimensions Color Binning Information Design Resources About Bridgelux

Page 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17

Bridgelux Vero 29 Array Series Product Data Sheet DS33 4/8/2014

Page 2 of 18

Product Feature Map

Vero 29 is the largest form factor in the exciting new Vero family of next generation solid state light sources. In addition to delivering the performance and light quality required for many lighting applications, Vero incorporates several features to simplify the design integration and manufacturing process, accelerate time to market and reduce system costs. Please consult the Bridgelux Vero Array Series Product Brief for more information on the Vero family of products.

Mounting holes

Polarity indication marks simplify manufacturing operator instructions
2D Bar code provides full manufacturing traceability

Solderless connector port enables simplified manufacturing processes, reduced inventory carrying
costs and can enable field upgradability

Thermally isolated solder pads reduce manufacturing cycle time and complexity

Tc Measurement point Top side part number marking improves inventory management and outgoing quality control

Radial die configuration improves lumen density and beam control

Optional Molex Pico-EZmate connector harness sold separately

Product Nomenclature

The part number designation for Bridgelux Vero LED arrays is explained as follows BXRC AB C DEFG H IJ Where:

BXRC Designates product family AB Designates the nominal color temperature 27 = 2700K 30 = 3000K, etc. C Designates minimum CRI C = 70, E = 80, G = 90 DEFG Designates nominal flux 10K0 = 10,000 lm, etc. H Designates array configuration IJ Designates CCT Bin options
02 = 2 SDCM 03 = 3 SDCM 04 = 4 SDCM

Bridgelux Vero 29 Array Series Product Data Sheet DS33 4/8/2014

Page 3 of 18

Top Side Part Number Markings

Vero includes a top side part number marking to help simplify inventory management and increase opportunities for production quality control. Any Vero product can be quickly identified to determine the product configuration, color or CRI by simply looking at its top side markings. Unlike previous product generations where markings were included only on the back side of the array, no longer is it necessary to handle turnover , uninstall the array in an infield application or guess which product it is by the color of the phosphor area. The Vero line of LED array products also has a 2D bar code which provides additional information and full product traceability for quality control purposes.

Enhanced Connectivity Options

Vero’s thermally isolated solder pads have been designed to make soldering fast and secure. For those who prefer an even faster solderless installation, Vero has a connector port that can be used to further simplify your manufacturing process, reduce inventory cost and allow for field upgradability. The connector port mates to the Molex Pico-EZmate connector harness, sold separately by Molex and through their distribution network. The Molex connector harnesses come in a variety of wire lengths and wire gauge options and can also be custom engineered to meet your specific design requirements. Please consult your local Molex sales representative or visit for more information.

Lumen Maintenance Characteristics

Bridgelux projects that the Vero 29 family of LED array products will deliver, on average, greater than 70% lumen maintenance after 50,000 hours of operation at the nominal drive current in Table This performance assumes constant current operation at up to times the nominal drive current with case temperature maintained at or below 85°C. For use beyond these operating conditions please consult your Bridgelux sales representative for further assistance. These projections are based on a combination of package test data, semiconductor chip reliability data, a fundamental understanding of package related degradation mechanisms, and performance observed from products installed in the field using Bridgelux die technology. Bridgelux conducts lumen maintenance tests per LM80. Observation of design limits is required in order to achieve this projected lumen maintenance.

Environmental Compliance

Bridgelux is committed to providing environmentally friendly products to the solid-state lighting market. Vero LED Arrays comply with the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS directive. Bridgelux does not intentionally add the following restricted materials to any LED array products lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls PBB or polybrominated diphenyl ethers PBDE .

UL Recognition
More datasheets: BXRC-35E10K0-L-03 | BXRC-50C10K0-L-04 | BXRC-30E10K0-L-03 | BXRC-40E10K0-L-03 | BXRC-30G10K0-L-03 | BXRC-27E10K0-L-03 | BXRC-27G10K0-L-03 | BXRC-30E10K0-L-02 | BXRC-35G10K0-L-03 | BXRC-27E10K0-L-02


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BXRC-27G10K0-L-02 Datasheet file may be downloaded here without warranties.

Datasheet ID: BXRC-27G10K0-L-02 522369