BXRB-27E0360-B-00

BXRB-27E0360-B-00 Datasheet


BXRB XXX0360-X, -56C0470-X

Part Datasheet
BXRB-27E0360-B-00 BXRB-27E0360-B-00 BXRB-27E0360-B-00 (pdf)
Related Parts Information
BXRB-27G0360-B-00 BXRB-27G0360-B-00 BXRB-27G0360-B-00
BXRB-27G0360-A-00 BXRB-27G0360-A-00 BXRB-27G0360-A-00
BXRB-30G0360-B-00 BXRB-30G0360-B-00 BXRB-30G0360-B-00
BXRB-30E0360-B-00 BXRB-30E0360-B-00 BXRB-30E0360-B-00
BXRB-30G0360-A-00 BXRB-30G0360-A-00 BXRB-30G0360-A-00
BXRB-30E0360-A-00 BXRB-30E0360-A-00 BXRB-30E0360-A-00
BXRB-27E0360-A-00 BXRB-27E0360-A-00 BXRB-27E0360-A-00
BXRB-56C0470-B-00 BXRB-56C0470-B-00 BXRB-56C0470-B-00
BXRB-56C0470-A-00 BXRB-56C0470-A-00 BXRB-56C0470-A-00
PDF Datasheet Preview
Bridgelux LS Array Series

Data Sheet DS 20

BXRB XXX0360-X, -56C0470-X

Introduction

The Bridgelux family of LED Array products delivers high performance, compact and cost-effective solidstate lighting solutions to serve the general lighting market. These products combine the higher efficacy, lifetime, and reliability benefits of LEDs with the light output levels of many conventional lighting sources. The Bridgelux LS Array Series has been specified to enable lamp and luminaire designs which are thermally limited to a maximum of 4-5 Watts, including replacement lamps, decorative lighting and white goods applications.

The Bridgelux LS Array Series provides a high performance alternative to conventional solid state solutions, delivering between 300 and 470 lumens under application conditions in warm and cool white color temperatures. These compact high flux density light sources deliver uniform high quality illumination without pixilation or the multiple shadow effect caused by LED component based solutions, enabling both diffuse and directional lamp replacements for a wide range of applications. To simplify system design for appropriate light output, Bridgelux LED Arrays are specified to deliver performance under typical use conditions.

These integrated plug and play solutions reduce system complexity and enable miniaturized costeffective lamp and luminaire designs. Lighting system designs incorporating these LED Arrays deliver performance comparable to that of a 20-40 Watt incandescent, 20-35 Watt halogen and low wattage compact fluorescent lamps and luminaires and feature increased system level efficacy and service life. Typical applications include replacement lamps, task lighting, under cabinet, accent, pendant, sconces, porch, pathway, landscape, portable, and consumer luminaires and white goods.
• Compact high flux density light source
• Uniform high quality illumination
• Streamlined thermal path
• Energy Star / ANSI compliant binning
structure
• More energy efficient than incandescent,
halogen and fluorescent lamps
• Low voltage DC operation
• Instant light with unlimited dimming
• 5-year warranty
• RoHS compliant and Pb free
• Enhanced optical control
• Clean white light without pixilation
• Significantly reduced thermal resistance
and increased operating temperatures
• Uniform consistent white light
• Lower operating costs
• Increased safety
• Easy to use with daylight and motion
detectors to enable increased energy savings
• Reduced maintenance costs
• Environmentally friendly, no disposal issue
101 Portola Avenue, Livermore, CA 94551
• Tel 925 583-8400
• Fax 925 583-8401


Table of Contents

Product Nomenclature Average Lumen Maintenance Characteristics Environmental Compliance UL Recognition Minor Product Change Policy Cautionary Statements Case Temperature Measurement Point Quick Selection Guide Flux Characteristics Optical Characteristics Electrical Characteristics Absolute Minimum and Maximum Ratings Typical Performance at Alternative Drive Currents Mechanical Dimensions Typical Radiation Pattern Wavelength Characteristics at Rated Test Current, Tj=25°C Typical Relative Luminous Flux vs. Current, Tj=25° C Typical Light Output Characteristics vs. Temperature Typical Chromaticity Characteristics vs. Temperature Typical Forward Current Characteristics at Tj = 25°C Product Binning Color Binning Information Design Resources
3 4 5 6 7 8 9 10 11 13 14 15 16 17 18 19 20 21 23

Bridgelux LS Array Series Product Data Sheet DS20
12 May 2011

Page 2 of 24

Product Nomenclature

The part number designation for BXRB product families of Bridgelux LED Arrays is explained as follows:

Where B X R B Designates product family

A Designates color 27 for 2700K ANSI Bin 30 for 3000K ANSI Bin 56 for 5600K ANSI Bin

B Designates minimum CRI C = 70, E = 80, G = 90

C Designates nominal flux
0360 = 360 lm
0470 = 470 lm

D Designates configuration options, specific to each array family

E Designates color binning 00 = Full ANSI bin, 7 SDCM 03 = 3 SDCM binning option

F Designates wiring options, not applicable for LS Arrays

Average Lumen Maintenance Characteristics

Bridgelux projects that its family of LED Array products will deliver, on average, greater than 70% lumen maintenance after 50,000 hours of operation at the rated forward test current. This performance assumes constant current operation with case temperature maintained at or below 70°C. For use beyond these typical operating conditions please consult your Bridgelux sales representative for further assistance.

These projections are based on a combination of package test data, semiconductor chip reliability data, a fundamental understanding of package related degradation mechanisms, and performance observed from products installed in the field using Bridgelux die technology. Bridgelux conducts lumen maintenance tests per LM80. Observation of design limits is required in order to achieve this projected lumen maintenance.

Environmental Compliance

Bridgelux is committed to providing environmentally friendly products to the solid-state lighting market. Bridgelux LED Arrays are compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS directive. Bridgelux will not intentionally add the following restricted materials to LED Array products lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls PBB or polybrominated diphenyl ethers PBDE .

Bridgelux LS Array Series Product Data Sheet DS20
12 May 2011

Page 3 of 24

UL Recognition

Bridgelux secures UL Recognition for all the LED Array products. We continue to add arrays as they are recognized by UL. Please refer to the UL file E333389 for the latest list of UL Recognized Arrays. Bridgelux uses UL Recognized materials with suitable flammability ratings in the LED Array to streamline the process for customers to secure UL listing of the final luminaire product. Bridgelux recommends that luminaires are designed with a Class 2 Driver to facilitate the UL listing process.
More datasheets: CP-AD-515 | PI3PD22919GBEX | 2621 | FDW258P | 88225019 | AS1153-T | AS1157 | AS1157-T | AS1153 | RFC-RMNM-4F


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BXRB-27E0360-B-00 Datasheet file may be downloaded here without warranties.

Datasheet ID: BXRB-27E0360-B-00 522347