CRA2010-FZ-R020ELF

CRA2010-FZ-R020ELF Datasheet

• Special alloy resistor<br>• Power rating at 70 °C CRA2010 - 1 W,

Part	Datasheet
CRA2010-FZ-R020ELF	CRA2010-FZ-R020ELF (pdf)

Related Parts	Information
CRA2010-FZ-R010ELF	CRA2010-FZ-R010ELF
CRA2010-FZ-R015ELF	CRA2010-FZ-R015ELF

PDF Datasheet Preview
RoHS COMPLIANT • Special alloy resistor • Power rating at 70 °C CRA2010 - 1 W, CRA2512 - 3 W • Inductance less than 5 nH • RoHS compliant • Power supplies • Stepper motor drives CRA2010/CRA2512 - High Power Current Sense Chip Resistor Electrical Characteristics Characteristic Power Rating 70 °C Operating Temperature Range Derated to Zero Load at Maximum Working Voltage Insulation Resistance Range Resistance Tolerance Temperature CRA2010 CRA2512 -55 °C to +170 °C +170 °C P x R 1/2 > 100 megohms ±1 %, ±5 % ±75 PPM/°C Performance Characteristics Test Thermal Shock Short Time Overload Low Temperature Storage High Temperature Exposure Bias Humidity Mechanical Shock Vibration Load Life Resistance to Solder Heat Moisture Resistance Conditions -55 to + 150 1000 Cycles, 15 minutes 5 X Rated Power for 5 seconds -65 for 24 hours 10000 hours + 170 + 85 % RH, 10 % Bias, 1000 hours 100 g’s for 6 milliseconds, 5 pulses Frequency varied 10 to 2000 KHz in one minute, 3 directions, 12 hours 1000 hours at rated power at +70 hours on, hours off +260 Solder, 10-12 second dwell, 25 mm/second emergence MIL-STD-202 Method 106, 0 % power 7a and 7b not required % + Ω % + Ω % + Ω % + Ω % + Ω % + Ω + Ω + Ω % + Ω + Ω Product Dimensions Model CRA2010 CRA2512 ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, are subject to change without notice. Customers should verify actual device performance in their applications. Recommended Solder Pad Layout Cu TRACE SENSING TRACE

PDF Datasheet Preview

*RoHS COMPLIANT
• Special alloy resistor
• Power rating at 70 °C CRA2010 - 1 W,

CRA2512 - 3 W
• Inductance less than 5 nH
• RoHS compliant*
• Power supplies
• Stepper motor drives

CRA2010/CRA2512 - High Power Current Sense Chip Resistor

Electrical Characteristics

Characteristic Power Rating 70 °C Operating Temperature Range Derated to Zero Load at Maximum Working Voltage Insulation Resistance Range Resistance Tolerance Temperature

CRA2010

CRA2512
-55 °C to +170 °C
+170 °C

P x R 1/2
> 100 megohms
±1 %, ±5 %
±75 PPM/°C

Performance Characteristics

Test Thermal Shock

Short Time Overload Low Temperature Storage High Temperature Exposure Bias Humidity

Mechanical Shock Vibration

Load Life

Resistance to Solder Heat Moisture Resistance

Conditions -55 to + 150 1000 Cycles, 15 minutes 5 X Rated Power for 5 seconds
-65 for 24 hours
10000 hours + 170
+ 85 % RH, 10 % Bias, 1000 hours 100 g’s for 6 milliseconds, 5 pulses Frequency varied 10 to 2000 KHz in one minute, 3 directions, 12 hours 1000 hours at rated power at +70 hours on, hours off +260 Solder, 10-12 second dwell, 25 mm/second emergence MIL-STD-202 Method 106, 0 % power 7a and 7b not required
% + Ω % + Ω % + Ω
% + Ω % + Ω % + Ω + Ω + Ω % + Ω + Ω

Product Dimensions

Model CRA2010 CRA2512
± ±
± ±
± ±
± ±
± ±
± ±
± ±
± ±
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, are subject to change without notice. Customers should verify actual device performance in their applications.

Recommended Solder Pad Layout

Cu TRACE

SENSING TRACE

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CRA2010-FZ-R020ELF Datasheet file may be downloaded here without warranties.

Datasheet ID: CRA2010-FZ-R020ELF 522171