AMMC-5033 - 32 GHz Power Amplifier
Part | Datasheet |
---|---|
![]() |
AMMC-5033-W10 (pdf) |
Related Parts | Information |
---|---|
![]() |
AMMC-5033-W50 |
PDF Datasheet Preview |
---|
AMMC-5033 - 32 GHz Power Amplifier Data Sheet Chip Size 2730 x 1300 µm 108 x mils Chip Size Tolerance ± 10 µm mils Chip Thickness 100 ± 10 µm 4 ± mils Pad Dimensions 80 x 80 µm ± mils Avago’s AMMC-5033 is a MMIC power amplifier designed for use in wireless transmitters that operate within to range. At 25 GHz, it provides of output power P-1dB and of small- signal gain from a small easy-to-use device. The device has input and output matching circuitry for use in environments. The AMMC- 5033 also integrates a temperature compensated RF power detection circuit that enables power detection of at 22 GHz. For improved reliability and moisture protection, the die is passivated at the active areas. AMMC-5033 Absolute Maximum Ratings[1] Symbol Parameters/Conditions Units Min. Max. Vd1,2 Vg1, Vgg Det Bias Positive Drain Voltage Gate Supply Voltage Applied Detector Bias Optional First Stage Drain Current mA 320 Second Stage Drain Current mA 640 CW Input Power dBm 23 Operating Channel Temp. °C +150 Tstg Storage Case Temp. °C -65 +150 Tmax Maximum Assembly Temp. °C +300 60 sec max • Wide frequency range 32 GHz • High power P-1dB 25 GHz = 27 dBm • High gain 20 dB • Return loss Input -13 dB, Output dB • Integrated RF power detector • Designed for use in transmitters that operate in various frequency bands between GHz and • Can be driven by the AMMC-5040 20-40 GHz or the AMMC-5618 6-20 GHz MMIC amplifiers, increasing the power handling capability of transmitters requiring linear operation. Note Operation in excess of any one of these conditions may result in damage to this device. Note These devices are ESD sensitive. The following precautions are strongly recommended Ensure that an ESD approved carrier is used when dice are transported from one destination to another. Personal grounding is to be worn at all times when handling these devices. AMMC-5033 DC Specifications/Physical Properties[1] Parameters and Test Conditions Id1 Id2 Vgg DETBias First Stage Drain Supply Current Vd1 = V, Vg1 = Open, Vgg set for Id2 Typical Second Stage Drain Supply Current Vd2 = 5 V, Vg1 = Open, Vgg set for Id2 Typical Gate Supply Operating Voltage Id1 Q + Id2 Q = 780 mA Detector Bias Voltage Optional First Stage Thermal Resistance[2] Backside Temperature, Tb = 25°C Second Stage Thermal Resistance[2, 3] Backside Temperature, Tb = 25°C Units Ordering Information: AMMC-5033-W10 = 10 devices per tray AMMC-5033-W50 = 50 devices per tray For product information and a complete list of distributors, please go to our website: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright 2005-2009 Avago Technologies Limited. All rights reserved. Obsoletes 5989-3935EN AV02-0682EN - February 25, 2009 |
More datasheets: B32537B3685K | B32537B3225K | B32537B3475K | B32537B5155K | B32537B3684K | B32537B3155K | 400432 | FQL50N40 | A0375.LN | AMMC-5033-W50 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AMMC-5033-W10 Datasheet file may be downloaded here without warranties.