95A1A-B24-B15

95A1A-B24-B15 Datasheet

Part	Datasheet
95A1A-B24-B15	95A1A-B24-B15 (pdf)

PDF Datasheet Preview
RoHS VCEOARMVSAPIOILLINAASBNLTE • Available in a variety of pin-out • Virtually electrical circuit isolation • Model 96 sealed for board wash • Metal or plastic shaft options 91, 92, 93, 94, 95, 96 - 5/8 ” Square Single-Turn Panel Control 97, 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch Potentiometer Initial Electrical Characteristics1 Conductive Plastic Element Cermet Element Standard Resistance Range Linear Tapers A, B, E, & H ......................... B & E 1 K ohms to 1 megohm A & H 100 ohms to 1 megohm Audio Tapers C, D, F, G, S, & T ................. D,G,S, & T 1 K ohms to 1 megohm C & F 1 K ohms to 1 megohm Total Resistance % or 20 % 5% or 10% Independent ±5 % Absolute Minimum Resistance.........................2 ohms 2 ohms maximum Effective Electrical Angle tapers 240 ° ± 5 Linear tapers 240 ° ± 6 ° Audio tapers 225 ° ± 5 ° Audio tapers 225 ° ± 6 ° Contact Resistance Variation ±1 % or 3 ohms whichever is greater Dielectric Withstanding Voltage MIL-STD-202, Method 301 Sea Level VAC 1,500 VAC minimum 70,000 Feet VAC 500 VAC minimum Insulation Resistance 500 VDC megohms minimum................................. 1,000 megohms minimum Power Rating Voltage Limited By Power Dissipation or 350 VAC, Whichever Is Less +70 °C Single Section Assembly ................ Linear tapers Linear tapers 2 watts Audio tapers watt Audio tapers 1 watt +70 °C Multiple Section Assembly ............. Linear tapers watt/section......................... Linear tapers 1 watt/section Audio tapers watt/section Audio tapers watt/section +125 0 watt Theoretical Essentially Environmental Characteristics1 Operating Temperature Range -40 °C to +125 °C °C to +125 °C Storage Temperature Range.............................. -55 °C to +125 °C °C to +125 °C Temperature Over Storage Temperature ±1,000 ppm/°C Vibration Single 15 G Total Resistance Shift................................... ±2 % % maximum Voltage Ratio ±5 % % maximum Shock Single 30 G Total Resistance Shift................................... ±2 % % maximum Voltage Ratio ±5 % % maximum Load Life 1,000 hours Total Resistance Shift................................... ±10 % % maximum Rotational Life No Load 100,000 cycles Total Resistance Shift................................... Linear tapers 10 ohms or ±15 % TRS max. ...... All tapers ±5 % TRS max. whichever is greater Audio tapers ±20 % maximum Contact Resistance Variation 50,000 cycles Linear tapers ±2 % Audio tapers ±3 % % Moisture Resistance MIL-STD-202, Method 103, Condition B Total Resistance Shift................................... Linear tapers ±10 % TRS maximum ................. All tapers ±5 % TRS maximum Audio tapers ±20 % TRS maximum Insulation Resistance 500 VDC .................. 100 megohms minimum megohms minimum IP Rating Model 96 IP 65 All Others IP 40 RoHS Directive 2002/95/EC Jan 27 2003 including Annex are subject to change without notice. Customers should verify actual device performance in their applications. Additional Features • DPST and DPDT switch options • RoHS compliant versions available* 91, 92, 93, 94, 95, 96 - 5/8 ” Square Single-Turn Panel Control 97, 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch Potentiometer Mechanical Characteristics1 Stop Strength 1/4 ” D shaft N-cm 4 lb.-in. 1/8 ” D shaft N-cm 3 lb.-in. Mechanical ° ±5 ° Torque Starting max. above average running torque Running Torque Single or Dual Section A ,D & R to N-cm to oz.-in. Single or Dual Section C & U to N-cm to oz.-in. Mounting Metal Bushing N-m 15-18 lb.-in. maximum Plastic Bushing 56-79 N-cm 5-7 lb.-in. maximum N-cm oz.-in. maximum in 45 ° shaft travel Weight Single Section, Plastic grams nominal Weight Single Section, Metal grams nominal Each Additional Section grams nominal Terminals circuit terminals, J-Hooks or solder lugs Soldering Condition hand soldering using Sn95/Ag5 no clean solder, ” wire diameter. Maximum temperature 399 °C 750 °F for 3 seconds. No wash process to be used with no clean Marking trademark, date code, resistance, manufacturer’s part number Ganging Multiple Section cups maximum Hardware...................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number. NOTE All Model 90 performance do not apply to units subjected to printed circuit board cleaning procedures, except for the sealed version Model 1At room ambient +25 °C nominal and 50 % relative humidity nominal, except as noted. are subject to change without notice. Customers should verify actual device performance in their applications. 91, 92, 93, 94, 95, 96 - 5/8 ” Square Single-Turn Panel Control 97, 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch Rotary Switch Initial Electrical Characteristics1 Contacts DPST N.C./N.C. or N.O./N.C. DPDT N.O./N.C. break before make Power Rating Resistive Load DPST 2 A 125 volts RMS-60 Hz or 2 A 28 VDC, 1 A 250 volts RMS-60 Hz DPDT A 125 volts RMS-60 Hz or 1 A 28 VDC Contact Resistance VDC-10 mA milliohms nominal Contact milliseconds maximum Dielectric Withstanding Voltage MIL-STD-202, Method 301 Sea VAC minimum Insulation 1000 megohms minimum Environmental Characteristics1 Operating Temperature Range 0 °C to +70 °C Exposure Temperature Range °C to +125 °C Vibration Dual 8 G Contact 10 milliohms maximum Contact Bounce millisecond maximum Shock Dual 20 G Contact 10 milliohms maximum Contact Bounce millisecond maximum Rotational Life cycles Switch Actuating Torque 50% Duty cycle Rated Power to N-cm 2 to 7 oz.-in. Contact 100 milliohms maximum Moisture Resistance MIL-STD-202, Method 106, Condition B Contact Resistance VDC-10 mA 10 milliohms maximum Insulation Resistance After 24 Hours Room Temperature 500 VDC megohms minimum Housing temperature, retardant, thermosetting plastic Mechanical Characteristics1

PDF Datasheet Preview

*RoHS VCEOARMVSAPIOILLINAASBNLTE
• Available in a variety of pin-out
• Virtually electrical circuit isolation
• Model 96 sealed for board wash
• Metal or plastic shaft options
91, 92, 93, 94, 95, 96 - 5/8 ” Square Single-Turn Panel Control 97, 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch

Potentiometer

Initial Electrical Characteristics1

Conductive Plastic Element

Cermet Element

Standard Resistance Range Linear Tapers A, B, E, & H ......................... B & E 1 K ohms to 1 megohm A & H 100 ohms to 1 megohm Audio Tapers C, D, F, G, S, & T ................. D,G,S, & T 1 K ohms to 1 megohm C & F 1 K ohms to 1 megohm

Total Resistance % or 20 % 5% or 10% Independent ±5 % Absolute Minimum Resistance.........................2 ohms 2 ohms maximum Effective Electrical Angle tapers 240 ° ± 5 Linear tapers 240 ° ± 6 °

Audio tapers 225 ° ± 5 ° Audio tapers 225 ° ± 6 ° Contact Resistance Variation ±1 % or 3 ohms whichever is greater Dielectric Withstanding Voltage MIL-STD-202, Method 301

Sea Level VAC 1,500 VAC minimum 70,000 Feet VAC 500 VAC minimum Insulation Resistance 500 VDC megohms minimum................................. 1,000 megohms minimum Power Rating Voltage Limited By Power Dissipation or 350 VAC, Whichever Is Less +70 °C Single Section Assembly ................ Linear tapers Linear tapers 2 watts

Audio tapers watt Audio tapers 1 watt +70 °C Multiple Section Assembly ............. Linear tapers watt/section......................... Linear tapers 1 watt/section

Audio tapers watt/section Audio tapers watt/section +125 0 watt Theoretical Essentially

Environmental Characteristics1

Operating Temperature Range -40 °C to +125 °C °C to +125 °C Storage Temperature Range.............................. -55 °C to +125 °C °C to +125 °C Temperature Over Storage

Temperature ±1,000 ppm/°C Vibration Single 15 G

Total Resistance Shift................................... ±2 % % maximum Voltage Ratio ±5 % % maximum Shock Single 30 G Total Resistance Shift................................... ±2 % % maximum Voltage Ratio ±5 % % maximum Load Life 1,000 hours Total Resistance Shift................................... ±10 % % maximum Rotational Life No Load 100,000 cycles Total Resistance Shift................................... Linear tapers 10 ohms or ±15 % TRS max. ...... All tapers ±5 % TRS max.
whichever is greater Audio tapers ±20 % maximum Contact Resistance Variation 50,000 cycles Linear tapers ±2 % Audio tapers ±3 % % Moisture Resistance MIL-STD-202, Method 103, Condition B Total Resistance Shift................................... Linear tapers ±10 % TRS maximum ................. All tapers ±5 % TRS maximum Audio tapers ±20 % TRS maximum Insulation Resistance 500 VDC .................. 100 megohms minimum megohms minimum IP Rating Model 96 IP 65 All Others IP 40
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex are subject to change without notice.

Customers should verify actual device performance in their applications.

Additional Features
• DPST and DPDT switch options
• RoHS compliant versions available*
91, 92, 93, 94, 95, 96 - 5/8 ” Square Single-Turn Panel Control 97, 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch

Potentiometer Mechanical Characteristics1 Stop Strength 1/4 ” D shaft N-cm 4 lb.-in.
1/8 ” D shaft N-cm 3 lb.-in. Mechanical ° ±5 ° Torque

Starting max. above average running torque Running Torque Single or Dual Section A ,D & R to N-cm to oz.-in. Single or Dual Section C & U to N-cm to oz.-in. Mounting Metal Bushing N-m 15-18 lb.-in. maximum

Plastic Bushing 56-79 N-cm 5-7 lb.-in. maximum N-cm oz.-in. maximum in 45 ° shaft travel Weight Single Section, Plastic grams nominal Weight Single Section, Metal grams nominal Each Additional Section grams nominal Terminals circuit terminals, J-Hooks or solder lugs Soldering Condition hand soldering using Sn95/Ag5 no clean solder, ” wire diameter.

Maximum temperature 399 °C 750 °F for 3 seconds. No wash process to be used with no clean Marking trademark, date code, resistance, manufacturer’s part number Ganging Multiple Section cups maximum Hardware...................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number. NOTE All Model 90 performance do not apply to units subjected to printed circuit board cleaning procedures, except
for the sealed version Model 1At room ambient +25 °C nominal and 50 % relative humidity nominal, except as noted.
are subject to change without notice. Customers should verify actual device performance in their applications.
91, 92, 93, 94, 95, 96 - 5/8 ” Square Single-Turn Panel Control 97, 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch

Rotary Switch

Initial Electrical Characteristics1

Contacts DPST N.C./N.C. or N.O./N.C. DPDT N.O./N.C. break before make

Power Rating Resistive Load DPST 2 A 125 volts RMS-60 Hz or 2 A 28 VDC, 1 A 250 volts RMS-60 Hz DPDT A 125 volts RMS-60 Hz or 1 A 28 VDC

Contact Resistance VDC-10 mA milliohms nominal Contact milliseconds maximum Dielectric Withstanding Voltage MIL-STD-202, Method 301

Sea VAC minimum Insulation 1000 megohms minimum

Environmental Characteristics1

Operating Temperature Range 0 °C to +70 °C Exposure Temperature Range °C to +125 °C Vibration Dual 8 G

Contact 10 milliohms maximum Contact Bounce millisecond maximum Shock Dual 20 G Contact 10 milliohms maximum Contact Bounce millisecond maximum Rotational Life cycles Switch Actuating Torque 50% Duty cycle Rated Power to N-cm 2 to 7 oz.-in. Contact 100 milliohms maximum Moisture Resistance MIL-STD-202, Method 106, Condition B Contact Resistance VDC-10 mA 10 milliohms maximum Insulation Resistance After 24 Hours Room Temperature 500 VDC megohms minimum Housing temperature, retardant, thermosetting plastic Mechanical Characteristics1

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 95A1A-B24-B15 Datasheet file may be downloaded here without warranties.

Datasheet ID: 95A1A-B24-B15 522084