F4810

F4810 Datasheet

TESTED WITH FILTER MODEL NUMBERS FC100V20A FC100V5A F2410 F4804A, F4810 FC100V5A F4804A, F4810 FC100V5A F4804A, F4810 F2410 F4804A, F4810 F4804A, F4810 F4804A, F4810

Part	Datasheet
F4810	F4810 (pdf)

PDF Datasheet Preview
Bel Power Solutions offers a complete range of input filters to help control EMI in board-level DC-DC converter applications. The table below lists combinations of input filters and DC-DC converters that have test data available. These test results are presented only to provide general guidelines, as EMI issues vary considerably based on many variables specific to each application. Due to the large number of possible permutations of DC-DC converters and input filters, not all combinations have been tested. Therefore, please refer to the data presented for each filter to select filters that may work in combinations not specified below. DC-DC CONVERTER SERIES FES HBD HES IAD IAS IES LES OET Q24 Q48 QBS QD48 QES QL48 QM48 QME48 SQ24 SQ48 SQE48 SQM48 SQT48 TESTED WITH FILTER MODEL NUMBERS FC100V20A FC100V5A F2410 F4804A, F4810 FC100V5A F4804A, F4810 FC100V5A F4804A, F4810 F2410 F4804A, F4810 F4804A, F4810 F4804A, F4810 FILTER SERIES FC F FC F FC F PAGE 13 2, 7 2, 7 13 2, 7 13 2, 7 2, 7 2, 7 2, 7 2, 7 Bel Power Solutions 152 North 3rd Street, Suite 805 San Jose, CA 95112 USA 2015 Bel Power Solutions, inc. North America Asia-Pacific Europe, Middle East +353 61 225 977 belpowersolutions.com BCD.00344_AB • RoHS lead free solder and lead solder exempted products are available • Maximum current 4 A with no derating • Maximum operating input voltage 80 V • 100 V 100 mS transient withstand capability • Differential LC-filter stage • Surface mounted design • Small footprint only sq. inch • Low profile inch mm] maximum • Low weight oz g] • Operation over -40° C to 85 ° C ambient temperature range • No airflow required up to 85 ° C • Enables DC-DC converter compliance with EN55022 and FCC Class B requirements conducted emissions The F4804A Input Filter minimizes the conducted and radiated emissions generated by switch mode DC-DC converters, and allows board designs utilizing DC-DC converters to meet stringent FCC and EN55022 Class B conducted emissions requirements. Unlike most available off-the-shelf filter modules, the F4804A, in addition to common mode noise reduction components, is provisioned with a differential LC-filter stage, which virtually guarantees compliance with conducted noise standards across the frequency range from 150 kHz to 30 MHz, including fundamental switching frequency and its harmonics. Test results show headroom of 15-20 dB for conducted noise quasi-peak levels, in relation to Class B requirements. F4804A filter is designed specifically for distributed power solutions in conjunction with DC-DC converters. Low profile and small size only sq. in. in a surface mount package helps the designer save system board real estate, and simplifies the layout. A single filter can be used with multiple converters, and is capable of providing up to 4 A to the converter input bus at 85 ° C. When used as specified within this data sheet, these filters do not require airflow and/or derating at high temperatures. Differential and Common Mode filtering for DC-DC converters: o Telecommunications o Data communications o Distributed Power Solutions belpowersolutions.com 2015 Bel Power Solutions, inc. BCD.00344_AB Conditions TA = 25 º C, No Airflow, Vin = 48 VDC, unless otherwise specified. PARAMETER NOTES Absolute Maximum Ratings Input Voltage Continuous Operating Ambient Temperature Storage Temperature Electrical Characteristics Operating Input Voltage Range Maximum Operating Current 85 ° C ambient, no airflow DC Resistance total for two legs

PDF Datasheet Preview

Bel Power Solutions offers a complete range of input filters to help control EMI in board-level DC-DC converter applications. The table below lists combinations of input filters and DC-DC converters that have test data available. These test results are presented only to provide general guidelines, as EMI issues vary considerably based on many variables specific to each application.

Due to the large number of possible permutations of DC-DC converters and input filters, not all combinations have been tested. Therefore, please refer to the data presented for each filter to select filters that may work in combinations not specified below.

DC-DC CONVERTER SERIES FES HBD HES IAD IAS IES LES OET Q24 Q48 QBS QD48 QES QL48 QM48 QME48 SQ24 SQ48 SQE48 SQM48 SQT48

TESTED WITH FILTER MODEL NUMBERS FC100V20A FC100V5A F2410 F4804A, F4810 FC100V5A F4804A, F4810 FC100V5A F4804A, F4810 F2410 F4804A, F4810 F4804A, F4810 F4804A, F4810

FILTER SERIES FC F FC F FC F

PAGE 13 2, 7 2, 7 13 2, 7 13 2, 7 2, 7 2, 7 2, 7 2, 7

Bel Power Solutions 152 North 3rd Street, Suite 805

San Jose, CA 95112 USA
2015 Bel Power Solutions, inc.

North America

Asia-Pacific

Europe, Middle East +353 61 225 977
belpowersolutions.com

BCD.00344_AB
• RoHS lead free solder and lead solder exempted products are available
• Maximum current 4 A with no derating
• Maximum operating input voltage 80 V
• 100 V 100 mS transient withstand capability
• Differential LC-filter stage
• Surface mounted design
• Small footprint only sq. inch
• Low profile inch mm] maximum
• Low weight oz g]
• Operation over -40° C to 85 ° C ambient temperature range
• No airflow required up to 85 ° C
• Enables DC-DC converter compliance with

EN55022 and FCC Class B requirements conducted emissions

The F4804A Input Filter minimizes the conducted and radiated emissions generated by switch mode DC-DC converters, and allows board designs utilizing DC-DC converters to meet stringent FCC and EN55022 Class B conducted emissions requirements. Unlike most available off-the-shelf filter modules, the F4804A, in addition to common mode noise reduction components, is provisioned with a differential LC-filter stage, which virtually guarantees compliance with conducted noise standards across the frequency range from 150 kHz to 30 MHz, including fundamental switching frequency and its harmonics. Test results show headroom of 15-20 dB for conducted noise quasi-peak levels, in relation to Class B requirements. F4804A filter is designed specifically for distributed power solutions in conjunction with DC-DC converters. Low profile and small size only sq. in. in a surface mount package helps the designer save system board real estate, and simplifies the layout. A single filter can be used with multiple converters, and is capable of providing up to 4 A to the converter input bus at 85 ° C. When used as specified within this data sheet, these filters do not require airflow and/or derating at high temperatures.

Differential and Common Mode filtering for DC-DC converters:
o Telecommunications o Data communications o Distributed Power Solutions
belpowersolutions.com
2015 Bel Power Solutions, inc.

BCD.00344_AB

Conditions TA = 25 º C, No Airflow, Vin = 48 VDC, unless otherwise specified.

PARAMETER

NOTES

Absolute Maximum Ratings

Input Voltage

Continuous

Operating Ambient Temperature

Storage Temperature

Electrical Characteristics

Operating Input Voltage Range

Maximum Operating Current
85 ° C ambient, no airflow

DC Resistance total for two legs

More datasheets: 6-5-850B | 3/4-5-850B | 1-5-850B | 4-5-850B | 12-5-850B | AK5536VN | 1583 | T0051320599N | FQP11N40 | ELS-4005SURWA/S530-A3

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived F4810 Datasheet file may be downloaded here without warranties.

Datasheet ID: F4810 521642