EIR-EXTEND-4

EIR-EXTEND-4 Datasheet

EIR-Extend-4-0812ds-1/3

Part	Datasheet
EIR-EXTEND-4	EIR-EXTEND-4 (pdf)

PDF Datasheet Preview
B&B ELECTRONICS EIR-Extend-4-0812ds-1/3 2011 by B&B Electronics. All rights reserved. Model EIR-Extend-4 4 Port Industrial Ethernet Switch and Ethernet Extender Features 9 Complies with UL508 and NEMA TS1 & TS2 Environmental requirements for Traffic control equipment 9 Complies with IEC61000-6-2 EMC Generic standard immunity for Heavy Industrial environment 9 Redundant Power Inputs 9 Wide Operating Temperature 9 Extend Ethernet up to 6232 ft km over standard copper wires 9 Ethernet Ports 4 RJ-45 10/100Mbps Full/Half-duplex, Auto-negotiation / Auto-MDI/MDX 9 Ethernet Extend Port 1 RJ-11 and terminal block 50Mbps Full Duplex VDSL 9 Extender port compatible with EIS-Extend, EIR-Extend, EIRM-Extend-x, EIRP-Extend, Functional Description The EIR-EXTEND-4 is a 4 port Ethernet switch and point-to-point Ethernet Extender designed to operate in harsh environments. Designed to operate at temperatures from -40 to 75º C, it has been tested for functional operation up to 85º C. Using existing copper wire runs, it allows the extension of Ethernet signals. The EIR-EXTEND-4 is the perfect solution for installing Ethernet connectivity on the factory floor. Used with a 2nd extender the configuration is easy. Configure one unit as the local device, and the other one as the remote device. External power supplies are required not included . Ordering Information Model Number EIR-Extend-4 Accessories DR19RMKT EIRSP1 MDR-40-24 Description DIN Rail Mount Ethernet Extender and switch Adjustable DIN Rail 19 Inch Rack Mount Kit Single Stage Surge Protector DIN Rail Mount Power Supply, 24 VDC, 1.7A International Office 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 PRODUCT INFORMATION B&B ELECTRONICS EIR-Extend-4-0812ds-2/3 2011 by B&B Electronics. All rights reserved. Specifications Technology Standards: Protocol Processing Power Input Voltage 10BaseT 802.3u 100BaseTx 802.3x Ethernet over VDSL Transparent to higher level Protocols Half-duplex backpressure Full-duplex 802.3x 48 VDC Power Jack 24 - 48 VDC Terminal Block Power Consumption W Max., Mechanical Case Dimensions Weight DIN Mount IP30 Aluminum 50mm W x 110mm D x 135mm H W x D x H lbs kg Ethernet Interface Ports Speed Distance Cable 4 - RJ-45, 10/100BaseTX Full/Half Duplex Auto-Negotiation Auto-MDI/MDX 10/100 Mbps 320 ft 100 m CAT 5 Extender Interface Port One RJ-11 or Terminal Block Speed Up to 50 Mbps Distance Up to 6,232 ft km Cable 24 AWG Copper Pair 0.5mm diameter, 1 pair wire or larger *see LED Chart for distance/speed combinations Environment Operating Temp -40 to 75º C -40 to 167F Tested to 85º C Storage Temp -40 to 85º C

PDF Datasheet Preview

B&B ELECTRONICS

EIR-Extend-4-0812ds-1/3
2011 by B&B Electronics. All rights reserved.

Model EIR-Extend-4
4 Port Industrial Ethernet Switch and

Ethernet Extender

Features 9 Complies with UL508 and NEMA TS1 & TS2 Environmental requirements for Traffic control equipment 9 Complies with IEC61000-6-2 EMC Generic standard immunity for Heavy Industrial environment 9 Redundant Power Inputs 9 Wide Operating Temperature 9 Extend Ethernet up to 6232 ft km over standard copper wires 9 Ethernet Ports 4 RJ-45 10/100Mbps Full/Half-duplex, Auto-negotiation / Auto-MDI/MDX 9 Ethernet Extend Port 1 RJ-11 and terminal block 50Mbps Full Duplex VDSL 9 Extender port compatible with EIS-Extend, EIR-Extend, EIRM-Extend-x, EIRP-Extend,

Functional Description

The EIR-EXTEND-4 is a 4 port Ethernet switch and point-to-point Ethernet Extender designed to operate in harsh environments. Designed to operate at temperatures from -40 to 75º C, it has been tested for functional operation up to 85º C. Using existing copper wire runs, it allows the extension of Ethernet signals. The EIR-EXTEND-4 is the perfect solution for installing Ethernet connectivity on the factory floor. Used with a 2nd extender the configuration is easy. Configure one unit as the local device, and the other one as the remote device. External power supplies are required not included .
Ordering Information

Model Number EIR-Extend-4 Accessories

DR19RMKT

EIRSP1 MDR-40-24

Description DIN Rail Mount Ethernet Extender and switch

Adjustable DIN Rail 19 Inch Rack Mount Kit Single Stage Surge Protector DIN Rail Mount Power Supply, 24 VDC, 1.7A

International Office 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445

PRODUCT INFORMATION

B&B ELECTRONICS

EIR-Extend-4-0812ds-2/3
2011 by B&B Electronics. All rights reserved.

Specifications Technology Standards:

Protocol Processing

Power Input Voltage
10BaseT 802.3u 100BaseTx 802.3x Ethernet over VDSL Transparent to higher level Protocols Half-duplex backpressure Full-duplex 802.3x
48 VDC Power Jack
24 - 48 VDC Terminal Block

Power Consumption W Max.,

Mechanical Case Dimensions

Weight

DIN Mount IP30 Aluminum 50mm W x 110mm D x 135mm H W x D x H lbs kg

Ethernet Interface Ports

Speed Distance Cable
4 - RJ-45, 10/100BaseTX Full/Half Duplex Auto-Negotiation Auto-MDI/MDX 10/100 Mbps 320 ft 100 m CAT 5

Extender Interface

Port

One RJ-11 or Terminal

Block

Speed

Up to 50 Mbps

Distance

Up to 6,232 ft km

Cable
24 AWG Copper Pair
0.5mm diameter, 1 pair
wire or larger
*see LED Chart for distance/speed combinations

Environment Operating Temp
-40 to 75º C -40 to 167F Tested to 85º C

Storage Temp
-40 to 85º C

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived EIR-EXTEND-4 Datasheet file may be downloaded here without warranties.

Datasheet ID: EIR-EXTEND-4 521501