Part | Datasheet |
---|---|
![]() |
12DC1AST (pdf) |
PDF Datasheet Preview |
---|
CUSTOMER DESCRIPTION MODEL NO. DAVID NO. ISSUE DATE ISSUE EDITON AC ADAPTOR DP48-1201000 C169-75 2010/04/08 FOR APPROVAL SHEET 1.According to our ISO-9002 system, We cannot process your P.O before you approve this specification by signing, stamping and returning the“Declaration of approval”Section of this page. 2.This document is property of System Connection Inc is prepared for the use Disclosure or distribution of part or whole of this documemt without the written permission of System Connection Inc is strictly prohibited. The whole specification including this and the Client’s Declaration of Approval following pages have been carefully studied and accepted andapproved by us with no query. Page 2 Electrical Specification Page 3 Mechanical drawing Page 4 Construction Drawing Authorized Signature & Company Page 5 Materials List Page 6 Label specification Page 7 Package Page 8 Sample test report System Connection Inc. 441 EAST BAY BLVD. PROVO, UT 84606 USA TEL +001 801-765-9849 MODEL NO. DP48-1201000 System Connection Inc. DAVID NO. AC ADAPTOR C169-75 Part EI-48 Current Diagram: 120VAC 60Hz ISSUE DATE 2010/04/08 12VDC 1000mA 130℃ Construction: Surface Damage. Rusting. Foam Flow or Air not Permitted. Lead tension test Lead must be withstand a pull kg for 30 seconds. Characteristics Primary rated voltage and frequency 120 VAC 60 Hz Secondary rating :with Tolerance ,At Input Voltage 120 VAC, 60 Hz TEST POINT 3-4 Rated Voltage 12VDC ±5% Rated Current DC 1000mA Voltage Regulation No Load Voltage 17.5VDC MAX Exciting Current Input Primary 120 V 60 Hz 80 mA MAX. No Load Hi-Pot test Apply 1500 VAC 3 mA 60 Seconds between the Primary to Secondary and between Primary to Core. Apply 500 VAC , 3 mA 60 Seconds between Secondary to core. Insulation test 500 V DC 100 MΩ min, between winding to winding and core. Humidity test Temp 25 ±5 ℃ relative humidity 91~95 % RH for 6 hours. After Keeping 30 minutes following insulation must be larger than MΩ. Temperature test Less than 75 ℃ for rated test with Resistance method. Adequate Standard UL/CUL APPROVED BY RECHECKED BY CHECKED BY REPORTED BY 2/10/4 |
More datasheets: 831613A2.0 | 831615C3.0 | 831615C6.BAB | 831613C3.0 | 83161348 | 176 | HSME-C177 | 100-4110-2 | AFB0812SHD-F00 | AFB0812SHD |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 12DC1AST Datasheet file may be downloaded here without warranties.