709176001442006
709176001442006 Datasheet
22 Ø - 1p 709176001422006 069176702201000 069176702101000 069176702301000 609176001415100 609176001415000
| Part | Datasheet |
|---|---|
709176001442006 |
709176001442006 (pdf) |
| Related Parts | Information |
|---|---|
69176702301000 |
69176702301000 |
609176001415000 |
609176001415000 |
69176702101000 |
69176702101000 |
69176702201000 |
69176702201000 |
609176001415100 |
609176001415100 |
709176001432006 |
709176001432006 |
709176001422006 |
709176001422006 |
709176001443006 |
709176001443006 |
| PDF Datasheet Preview |
|---|
| Discrete Wire IDC Contact & Cap Series 9176-400 The 917X series of surface mount Insulation Displacement Connectors IDC were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from 14 AWG to 28 AWG. This industry proven contact system has been tested to automotive levels of shock, vibration, and temperature cycling to prove their reliability and robustness. This new single contact was developed as a standalone component to enhance the application uses with the IDC technology. The simplicity of inserting a wire into an SMT contact with a small tool or optional retention / termination cap allows a wide range of devices to be connected to the PCB without soldering. In SSL applications specifically, these contacts are used to bring power and signal onto the PCB or are used to daisy chain multiple boards together in a long string. While the IDC contact provides a gas-tight connection to conductor of the wire, the optional cap provides a positive strain relief even in the harshest conditions. In case of repair, the wires can be removed and replace up to three times. The single 9176-400 series contact and cap accepts 22 AWG to 24 AWG wires with an insulation diameter ranging from 1.0mm to 1.5mm. These dual beam contacts support a 6 amp current rating with a large SMT solder base to provide maximum stability on the PCB. The optional locking strain relief cap acts as the termination tool for severe vibration applications. • Connecting discrete wire components directly to the PCB • Bringing power and signals onto a PCB • Daisy chaining PCB’s together to create a continuous string of boards • Application notes refer to 201-01-124 • IDC contact is supplied in T&R pockets for standard SMT placement • IDC contact provides a gas-tight connection to the PCB for long term reliability • Optional termination cap provides additional strain relief for severe environments • Tested to automotive levels on shock, vibration and temperature cycling for reliability • Reduced total applied cost versus solder or crimp processes • Individual contacts can be located anywhere on the PCB based on specific application ELECTRICAL • Current Rating 6 Amps/Contact • Voltage Rating Dependant on component proximity ENVIRONMENTAL • Operating Temperature -40ºC to +125ºC MECHANICAL • Insulator Material Nylon 46 UL94V0 • Contact Material Phosphor Bronze • Plating Tin over Nickel • Durability 3 Cycles HOW TO ORDER CONTACT OPTIONS 70 9176 Prefix 70 = Contact Series Number of Ways Code No of Ways Details 001 1 Page 20 Wire Gauge Size Code Accepted Wire Gauge 422 22 Gauge Stranded 432 24 Gauge Stranded 443 26-28 Gauge Stranded HOW TO ORDER CAP OPTIONS 60 9176 Plating Option 06 = Pure Tin all over Prefix 60 = Cap Series Number of Ways Code No of Ways Details |
| More datasheets: 857-11925 | 857-11926 | 857-11927 | 857-11928 | 857-11929 | EB41M2222 | 69176702301000 | 609176001415000 | 69176702101000 | 69176702201000 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 709176001442006 Datasheet file may be downloaded here without warranties.