609176001415100

609176001415100 Datasheet


22 Ø - 1p 709176001422006 069176702201000 069176702101000 069176702301000 609176001415100 609176001415000

Part Datasheet
609176001415100 609176001415100 609176001415100 (pdf)
Related Parts Information
69176702301000 69176702301000 69176702301000
609176001415000 609176001415000 609176001415000
69176702101000 69176702101000 69176702101000
69176702201000 69176702201000 69176702201000
709176001442006 709176001442006 709176001442006
709176001432006 709176001432006 709176001432006
709176001422006 709176001422006 709176001422006
709176001443006 709176001443006 709176001443006
PDF Datasheet Preview
Discrete Wire IDC Contact & Cap

Series 9176-400

The 917X series of surface mount Insulation Displacement Connectors IDC were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from 14 AWG to 28 AWG. This industry proven contact system has been tested to automotive levels of shock, vibration, and temperature cycling to prove their reliability and robustness. This new single contact was developed as a standalone component to enhance the application uses with the IDC technology. The simplicity of inserting a wire into an SMT contact with a small tool or optional retention / termination cap allows a wide range of devices to be connected to the PCB without soldering. In SSL applications specifically, these contacts are used to bring power and signal onto the PCB or are used to daisy chain multiple boards together in a long string. While the IDC contact provides a gas-tight connection to conductor of the wire, the optional cap provides a positive strain relief even in the harshest conditions. In case of repair, the wires can be removed and replace up to three times.

The single 9176-400 series contact and cap accepts 22 AWG to 24 AWG wires with an insulation diameter ranging from 1.0mm to 1.5mm. These dual beam contacts support a 6 amp current rating with a large SMT solder base to provide maximum stability on the PCB. The optional locking strain relief cap acts as the termination tool for severe vibration applications.
• Connecting discrete wire components directly to the PCB
• Bringing power and signals onto a PCB
• Daisy chaining PCB’s together to create
a continuous string of boards
• Application notes refer to 201-01-124
• IDC contact is supplied in T&R pockets for standard SMT placement
• IDC contact provides a gas-tight connection to the PCB for long term reliability
• Optional termination cap provides additional strain relief for severe environments
• Tested to automotive levels on shock, vibration and temperature cycling for reliability
• Reduced total applied cost versus solder or crimp processes
• Individual contacts can be located anywhere on the PCB based on specific application

ELECTRICAL
• Current Rating 6 Amps/Contact
• Voltage Rating Dependant on
component proximity

ENVIRONMENTAL
• Operating Temperature -40ºC to +125ºC

MECHANICAL
• Insulator Material Nylon 46 UL94V0
• Contact Material Phosphor Bronze
• Plating Tin over Nickel
• Durability 3 Cycles

HOW TO ORDER CONTACT OPTIONS
70 9176

Prefix 70 = Contact

Series

Number of Ways

Code

No of Ways

Details
001 1 Page 20

Wire Gauge Size

Code

Accepted

Wire Gauge
422 22 Gauge Stranded
432 24 Gauge Stranded
443 26-28 Gauge Stranded

HOW TO ORDER CAP OPTIONS
60 9176

Plating Option 06 = Pure Tin
all over

Prefix 60 = Cap

Series

Number of Ways

Code

No of Ways

Details
More datasheets: 857-11926 | 857-11927 | 857-11928 | 857-11929 | EB41M2222 | 69176702301000 | 609176001415000 | 69176702101000 | 69176702201000 | 709176001442006


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 609176001415100 Datasheet file may be downloaded here without warranties.

Datasheet ID: 609176001415100 521337