7023023000110

7023023000110 Datasheet

Series 7023 Staggered Dual Row

Part	Datasheet
7023023000110	7023023000110 (pdf)

PDF Datasheet Preview
Series 7023 Staggered Dual Row • Guide pins facilitate mating, ensure correct alignment • Insulator rigidity reduces p.c. card warp • Insulator maintains exact spacing between contacts • Reduces cost of card punching operation fewer holes • Reduces cost of contact staking operation one operation instead of two • Reduces assembly time no plastic strip to remove • For or p.c. card • Mates with Series 7024 and 7038 Receptacles TECHNICAL SPECIFICATIONS Current Rating 10 amperes Contact Resistance 6 milliohms, maximum Contact Material and Plating Phosphor Bronze per QQ-B-750, Composition A. Gold, 10 microinches minimum, over nickel, 30 to 100 microinches Insulator Material: Dielectric Withstanding Voltage: Diallyl phthalate, glass-filled, flame resistant Sea Level 1800 Volts rms per MIL-M-14F, Type SDGF. 675 Volts rms Variation 001/002/110/111 Thermoplastic Polycarbonate Variation 003 Insulation Resistance 25,000 megohms, minimum Insertion/Withdrawal Force 2 to 16 ounces per contact Operating Temperature -40ºC to +125ºC ORDERING CODE 7023 MOUNTING LAYOUT Number of Contacts 017, 023, 029, 035, 041, 047 Contacts used in this connector: Card Upper Card Lower Card Contacts Contacts 1/16" 60 7001 29 13 60 7001 28 13 3/32" 60 7001 29 23 60 7001 28 23 Diallyl Phthalate Glass Filled 1/16" Card 3/32" Card DIMENSIONS millimeters inches Number of Contacts 17 23 29 35 41 47 Max.

PDF Datasheet Preview

Series 7023 Staggered Dual Row
• Guide pins facilitate mating, ensure correct alignment
• Insulator rigidity reduces p.c. card warp
• Insulator maintains exact spacing between contacts
• Reduces cost of card punching operation fewer holes
• Reduces cost of contact staking operation one
operation instead of two
• Reduces assembly time no plastic strip to remove
• For or p.c. card
• Mates with Series 7024 and 7038 Receptacles

TECHNICAL SPECIFICATIONS

Current Rating 10 amperes

Contact Resistance 6 milliohms, maximum

Contact Material and Plating Phosphor Bronze per QQ-B-750, Composition A.

Gold, 10 microinches minimum, over nickel, 30 to 100 microinches

Insulator Material:

Dielectric Withstanding Voltage:

Diallyl phthalate, glass-filled, flame resistant Sea Level 1800 Volts rms
per MIL-M-14F, Type SDGF.
675 Volts rms

Variation 001/002/110/111 Thermoplastic Polycarbonate Variation 003

Insulation Resistance 25,000 megohms, minimum

Insertion/Withdrawal Force 2 to 16 ounces per contact

Operating Temperature -40ºC to +125ºC
ORDERING CODE
7023

MOUNTING LAYOUT

Number of Contacts 017, 023, 029, 035, 041, 047

Contacts used in this connector:

Card Upper Card Lower Card

Contacts

Contacts
1/16" 60 7001 29 13 60 7001 28 13
3/32" 60 7001 29 23 60 7001 28 23

Diallyl Phthalate Glass Filled
1/16" Card 3/32" Card

DIMENSIONS millimeters inches

Number of

Contacts 17 23 29 35 41 47

Max.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 7023023000110 Datasheet file may be downloaded here without warranties.

Datasheet ID: 7023023000110 521294