700073

700073 Datasheet

RF700074

Part	Datasheet
700073	700073 (pdf)

Related Parts	Information
700074	700074

PDF Datasheet Preview
Avery AD-750 Type A NFC RFID Inlay Dimensions Operating Frequency RF Protocol Chip User Memory UID 18 x 8 mm MHz ISO-14443A NXP NTAG213 144 bytes 7 bytes Toll free US 866-903- RFID 7343 / International +1-770-965-0807 RF700074 Format Dry Inlay Antenna dimensions CDxMD x in [18 x 8 mm] Die-cut dimensions Inlay substrate material Clear PET Inlay-to-liner adhesive Liner material Face Sheet Standard pitch in 20 mm Standard web width in 54 mm Total thickness over chip Nominal 200 um Operating temperature -4º to 122 ºF -25º to 50 ºC RoHS Quality assurance Un-wind direction EU Directive 2011/65/EU Compliant 100% read tested with-oftolerance inlay marked Inlay-side Out Core size with adaptor insert 6.04inch 153.42±0.50 Maximum roll outer diameter not to exceed Average # of units per roll in 15,000 ±300 verified Common Applications NFC Applications RF700073 PS Inlay x in [18 x 8 mm] x in [24 x 12 mm] Clear PET General purpose permanent hot melt 65 g Paper Liner N/A in 20 mm in 54 mm Nominal 290 um -4º to 122 ºF -25º to 50 ºC EU Directive 2011/65/EU Compliant 100% read tested with-of-tolerance inlay marked PS Inlay-side Out 3 inch 0.50mm in 8,000 ±100 verified 00 Care and handling RFID inlays are sensitive to ESD. Observe standard practices to keep environmental static charge to a minimum. Applications This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. Warranty Please refer to Avery Dennison RFID standard terms and conditions. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data. Product changes Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. Trademark statement Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit 2017 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA

PDF Datasheet Preview

Avery AD-750 Type A NFC RFID Inlay

Dimensions Operating Frequency

RF Protocol Chip

User Memory UID
18 x 8 mm MHz ISO-14443A NXP NTAG213 144 bytes 7 bytes

Toll free US 866-903- RFID 7343 / International +1-770-965-0807

RF700074

Format

Dry Inlay

Antenna dimensions CDxMD
x in [18 x 8 mm]

Die-cut dimensions

Inlay substrate material

Clear PET

Inlay-to-liner adhesive

Liner material

Face Sheet

Standard pitch
in 20 mm

Standard web width
in 54 mm

Total thickness over chip

Nominal 200 um

Operating temperature
-4º to 122 ºF -25º to 50 ºC

RoHS Quality assurance Un-wind direction

EU Directive 2011/65/EU Compliant 100% read tested with-oftolerance inlay marked Inlay-side Out

Core size with adaptor insert
6.04inch 153.42±0.50

Maximum roll outer diameter not to exceed Average # of units per roll
in 15,000 ±300 verified

Common Applications NFC Applications

RF700073 PS Inlay x in [18 x 8 mm] x in [24 x 12 mm] Clear PET General purpose permanent hot melt 65 g Paper Liner N/A in 20 mm in 54 mm Nominal 290 um -4º to 122 ºF -25º to 50 ºC EU Directive 2011/65/EU Compliant
100% read tested with-of-tolerance inlay marked PS Inlay-side Out 3 inch 0.50mm in
8,000 ±100 verified 00

Care and handling RFID inlays are sensitive to ESD. Observe standard practices to keep environmental static charge to a minimum. Applications This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. Warranty Please refer to Avery Dennison RFID standard terms and conditions. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data. Product changes Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. Trademark statement Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit
2017 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 700073 Datasheet file may be downloaded here without warranties.

Datasheet ID: 700073 521274