3793 3314 3408 3428 3627 3429 3440 3431 3432 3433 3372 3764
Part | Datasheet |
---|---|
![]() |
3793-6502UG (pdf) |
PDF Datasheet Preview |
---|
Pak 100 4-Wall Header x Latch/Ejector, Straight and Right Angle, High Temp Option 3000 Series S Military with 3M’s 3518 polarizing key and centerbump polarization S Optional ejector latches S Mounting holes for securing header to board S Solder tail and wrap tail options S Optional polarizing posts S High temperature option Physical Date Modified:May 30, 2003 Insulation Material Glass Filled Polyester PBT Glass Filled Polyester PCT High Temp Option Flammability UL 94V-0 Color Gray, Standard Beige High Temp Option Contact Material Copper Alloy Plating Underplate 100 [ µm ] Nickel QQ-N-290, Class 2 Wiping Area Gold MIL-G-45204, Type II, Grade C Solder Tails 200 [ µm ] 60/40 Tin Lead MIL-P-81728 Wrap Tails Gold Flash, Standard Marking 3M Logo, Part Identification Number and Orientation Triangle Electrical Current Rating 1 A Insulation Resistance >1 x 109 at 500 Vdc Withstanding Voltage 1000 Vrms at Sea Level Environmental Temperature Rating - 55°C to +105°C High Temp Process Rating Maximum 235°C, with 90 seconds over 215°C TS-0772-03 Sheet 1 of 4 UL File No. E68080 Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Pak 100 4-Wall Header x Latch/Ejector, Straight and Right Angle, High Temp Option 3000 Series -X0XX Header with No Ejector/Latch -X5XX Header with Short Ejector/Latch for 3M Sockets without Strain Relief -X6XX Header with Long Ejector/Latch for 3M Sockets with Strain Relief ± [ ] ± [ ] -X4XX Header with Ejector only ± Sq Typ [ ] See Note 2 Note This Ejector is a Nickel Plated Zinc Alloy Casting. “Y” F Typ Section A--A Straight Position 1 Orientation Triangle ± Sq Typ [ ] Position 1 B Notch A See Table 1 & Note1 Notch B See Table 1 Notch C See Table 1 & Note 1 F Typ CL “Y” Section B--B Right Angle See Note 2 Interconnect Solutions TS-0772-03 Sheet 2 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Pak 100 4-Wall Header x Latch/Ejector, Straight and Right Angle, High Temp Option 3000 Series Pin Quantity 10 14 16 20 24 26 30 34 40 50 60 64 3M Part Number 3793 3314 3408 3428 3627 3429 3440 3431 3432 3433 3372 3764 Table 1 Dimensions Polarization Notches Provided BC ABC 3M Part Number Suffix Contact Tail Dimension E -5XX2 -6XX2 Solder Tail for Thick PC Board -5X03 -6X03 Solder Tail for to Thick PC Board -5X05 -6X05 Wire Wrap Tail for up to 3 Levels of Wire Wrap See Note 2 Side to Side Stackability G Dia Table 2 Pin Cross Section Dimension F Diagonals Corner Radii Dimension G ± ± See Note 3 ± ± See Note 2 Max to Edge of PCB for Daisy Chain G Dia “Y” CL ”Y” CL Position 1 Position 1 ± Recommended Mounting Hole Pattern Straight Recommended Mounting Hole Pattern Right Angle For technical, sales or ordering information call 800-225-5373 Pak 100 4-Wall Header x Latch/Ejector, Straight and Right Angle, High Temp Option 3000 Series Ordering Information 30 Microinches Gold Plated Product Product Material N = High Temp Blank = Standard 3M Part Number See Table 1 Shroud and Pin Configuration 5 = 4 Wall, Right Angle 6 = 4 Wall, Straight Tail 02 = Solder Tail for Thick Board K2 = Kinked Solder Tails for Thick Board 03 = Solder Tails for to Thick Board 05 = Wrap Posts for up to 3 levels of Wire Wrap Latch/Ejector System Not available on High Temp version. 0 = No Latch/Ejector 4 = Roll Pin Ejectors 3M Part # 3505-4 5 = Short, Snap-In Latch/Ejectors, 3M Part # 3505-30 6 = Long, Snap-In Latch/Ejectors 3M Part # 3505-31 Product Material N = High Temp Blank = Standard 15 Microinches Gold Plated Product Plating Suffix UG = 15 microinch Gold 3M Part Number See Table 1 Shroud and Pin Configuration 5 = 4 Wall, Right Angle 6 = 4 Wall, Straight Tail 02 = Solder Tail for Thick Board K2=Kinked Solder Tails for Thick Board 03 =Solder Tails for to Thick Board Latch/Ejector System 0 = No Latch/Ejector 5 = Short, Snap In Latch/Ejectors 3M Part #3505-30 6 = Long, Snap In Latch/Ejectors 3M Part #3505-31 Interconnect Solutions TS-0772-03 Sheet 4 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized of 3M. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of 1 year from the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electronic and Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 3M 2003 |
More datasheets: B66283P0000X149 | B66453P0000X149 | B66283P0000X192 | B66283P0000X187 | RJMG241102670CR-A | A-DS37PP-TAXM-B-R | A-DS15PP-TAXM-B-R | A-DS09PP-TAXM-B-R | A-DS25PP-TAXM-B-R | A-DS50PP-TAXM-B-R |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 3793-6502UG Datasheet file may be downloaded here without warranties.