600870

600870 Datasheet

RF600870 Pressure Sensitive Inlay x in 90 x 19 mm x in x mm White PET S-490 FASSON 1.5M Clear PET N/A in mm in mm 11-14 mils 279-356 microns -40 to 185F -40 to 85C EU Directive 2011/65/EU Compliant 100% read tested with-of-tolerance inlay marked Inlay-side Out 3 in 76.2mm 13 in 330.2mm

Part	Datasheet
600870	600870 (pdf)

Related Parts	Information
600923	600923

PDF Datasheet Preview
UHF RFID Inlays AD-662uDNA Dimensions Operating Frequency RF Protocol Chip EPC Memory TID Memory USER Memory 90 x 19 mm Global 860 960 MHz ISO-18000-6C, EPC Class 1, Gen 2 NXP UCODE DNA 224 bit 48-bit unique serialized TID number 3072 bit Common Applications Glass & Automobile Tracking Race Timing Miscellaneous Applications Toll free US 866-903- RFID 7343 / International +1-770-965-0807 PART NUMBER Format Antenna dimensions CDxMD Die-cut dimensions Inlay substrate material Inlay-to-liner adhesive Liner material Face Sheet Standard pitch Standard web width Total thickness over chip Operating temperature RoHS Quality assurance Un-wind direction Core size with adaptor insert Maximum roll outer diameter not to exceed Average # of units per roll Rev N/A Dry Inlay x in 90 x 19 mm N/A White PET N/A N/A N/A in mm in mm 10-12 mils 254-305 microns -40 to 185F -40 to 85C EU Directive 2011/65/EU Compliant 100% read tested with-of-tolerance inlay marked Inlay-side Out 3 in mm 17 in mm 20,000 good +/- 10% 00 RF600870 Pressure Sensitive Inlay x in 90 x 19 mm x in x mm White PET S-490 FASSON 1.5M Clear PET N/A in mm in mm 11-14 mils 279-356 microns -40 to 185F -40 to 85C EU Directive 2011/65/EU Compliant 100% read tested with-of-tolerance inlay marked Inlay-side Out 3 in 76.2mm 13 in 330.2mm 10,000 good +/- 10% 00 Care and handling RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics/RFID to keep environmental impact and static charge to a minimum. Applications This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. Warranty Please refer to Avery Dennison RFID standard terms and conditions. Product Information Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data. Trademark statement Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit 2017 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA

PDF Datasheet Preview

UHF RFID Inlays

AD-662uDNA

Dimensions Operating Frequency

RF Protocol Chip

EPC Memory TID Memory USER Memory
90 x 19 mm Global 860 960 MHz ISO-18000-6C, EPC Class 1, Gen 2 NXP UCODE DNA 224 bit 48-bit unique serialized TID number 3072 bit

Common Applications Glass & Automobile Tracking Race Timing Miscellaneous Applications

Toll free US 866-903- RFID 7343 / International +1-770-965-0807

PART NUMBER Format Antenna dimensions CDxMD Die-cut dimensions Inlay substrate material Inlay-to-liner adhesive Liner material Face Sheet Standard pitch Standard web width Total thickness over chip Operating temperature RoHS

Quality assurance

Un-wind direction Core size with adaptor insert Maximum roll outer diameter not to exceed Average # of units per roll Rev

N/A Dry Inlay x in 90 x 19 mm N/A White PET N/A N/A N/A in mm in mm 10-12 mils 254-305 microns -40 to 185F -40 to 85C EU Directive 2011/65/EU Compliant 100% read tested with-of-tolerance inlay marked Inlay-side Out 3 in mm 17 in mm
20,000 good +/- 10% 00

RF600870 Pressure Sensitive Inlay x in 90 x 19 mm x in x mm White PET S-490 FASSON 1.5M Clear PET N/A in mm in mm 11-14 mils 279-356 microns -40 to 185F -40 to 85C EU Directive 2011/65/EU Compliant 100% read tested with-of-tolerance inlay marked Inlay-side Out 3 in 76.2mm 13 in 330.2mm
10,000 good +/- 10% 00

Care and handling RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics/RFID to keep environmental impact and static charge to a minimum.

Applications This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use.

Warranty Please refer to Avery Dennison RFID standard terms and conditions.

Product Information Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.

Trademark statement Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit
2017 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 600870 Datasheet file may be downloaded here without warranties.

Datasheet ID: 600870 521272