600958

600958 Datasheet

RF600958 Dry Inlay x in x mm N/A

Part	Datasheet
600958	600958 (pdf)

Related Parts	Information
600959	600959

PDF Datasheet Preview
UHF RFID Inlays AD-238u8 Dimensions Operating Frequency RF Protocol Chip EPC Memory TID Memory 70 x mm Global 860 960 MHz ISO-18000-6C, EPC Class 1, Gen 2 NXP UCODE 8 128 bit 96-bit Tag IDentifier TID factory locked 48-bit unique serial number factory-encoded into TID Toll free US 866-903- RFID 7343 / International +1-770-965-0807 Common Applications Apparel Supply Chain, Inventory and Logistics Home Essentials PART NUMBER Format Antenna dimensions CDxMD Die-cut dimensions RF600958 Dry Inlay x in x mm N/A Inlay substrate material Inlay-to-liner adhesive Liner material Face Sheet Standard pitch Standard web width Total thickness over chip Operating temperature White PET N/A N/A N/A in mm 74 mm mils 262-312 microns -40 to 185F -40 to 85C RoHS Quality assurance EU Directive 2011/65/EU Compliant 100% read tested with-oftolerance inlay marked Un-wind direction Core size with adaptor insert Maximum roll outer diameter not to exceed Average # of units per roll Rev Inlay-side Out 6 in mm 17 in mm 40,000 good +/- 10% 00 RF600959 Wet Inlay x in x mm x in x mm White PET S-490 1.5M Clear PET N/A in mm in mm mils 300-350 microns -40 to 185F -40 to 85C EU Directive 2011/65/EU Compliant 100% read tested with-oftolerance inlay marked PS Inlay-side Out 3 in mm 13 in mm 10,000 good +/- 10% 00 RF100413 Paper Label x in x mm x in x mm N/A S-490 40# SCK 55# TT2C Bright White in mm in mm mils 429-479 microns -40 to 185F -40 to 85C EU Directive 2011/65/EU Compliant 100% read tested withof-tolerance inlay marked Label-side Out 3 in mm 8 in mm 7,500 good +/- 10% 00 Care and handling RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics/RFID to keep environmental impact and static charge to a minimum. Applications This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. Warranty Please refer to Avery Dennison RFID standard terms and conditions. Product Information Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data. Trademark statement Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit 2017 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA Third party trademarks and/or trade names used herein are the property of their respective owner s . Some of the trademarks appear for identification purposes only.

PDF Datasheet Preview

UHF RFID Inlays

AD-238u8

Dimensions Operating Frequency

RF Protocol Chip

EPC Memory TID Memory
70 x mm Global 860 960 MHz ISO-18000-6C, EPC Class 1, Gen 2 NXP UCODE 8 128 bit 96-bit Tag IDentifier TID factory locked
48-bit unique serial number factory-encoded into TID

Toll free US 866-903- RFID 7343 / International +1-770-965-0807

Common Applications

Apparel Supply Chain, Inventory and Logistics Home Essentials

PART NUMBER Format Antenna dimensions CDxMD Die-cut dimensions

RF600958 Dry Inlay x in x mm N/A

Inlay substrate material Inlay-to-liner adhesive Liner material Face Sheet Standard pitch Standard web width Total thickness over chip

Operating temperature

White PET N/A N/A N/A in mm 74 mm mils 262-312 microns -40 to 185F -40 to 85C

RoHS Quality assurance

EU Directive 2011/65/EU Compliant 100% read tested with-oftolerance inlay marked

Un-wind direction Core size with adaptor insert Maximum roll outer diameter not to exceed Average # of units per roll Rev

Inlay-side Out 6 in mm 17 in mm
40,000 good +/- 10% 00

RF600959 Wet Inlay x in x mm x in x mm White PET S-490 1.5M Clear PET N/A in mm in mm mils 300-350 microns -40 to 185F -40 to 85C

EU Directive 2011/65/EU Compliant 100% read tested with-oftolerance inlay marked

PS Inlay-side Out 3 in mm 13 in mm
10,000 good +/- 10% 00

RF100413 Paper Label x in x mm x in x mm N/A S-490 40# SCK 55# TT2C Bright White in mm in mm mils 429-479 microns -40 to 185F -40 to 85C EU Directive 2011/65/EU Compliant 100% read tested withof-tolerance inlay marked Label-side Out 3 in mm 8 in mm
7,500 good +/- 10% 00

Care and handling RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics/RFID to keep environmental impact and static charge to a minimum.

Applications This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use.

Warranty Please refer to Avery Dennison RFID standard terms and conditions.

Product Information Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.

Trademark statement Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit
2017 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA Third party trademarks and/or trade names used herein are the property of their respective owner s .

Some of the trademarks appear for identification purposes only.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 600958 Datasheet file may be downloaded here without warranties.

Datasheet ID: 600958 521269