GW51C-MAXI-WDT
GW51C-MAXI-WDT Datasheet
•<br>• GW51C-MAXI
| Part | Datasheet |
|---|---|
GW51C-MAXI-WDT |
GW51C-MAXI-WDT (pdf) |
| PDF Datasheet Preview |
|---|
| Device Networking Access Ethernet Serial Server • • GW51C-MAXI • 1-port DIN-Rail model IP50 Standard • Selectable RS-232/422/485 serial interface 15 KV ESD protection • 10/100Mbps Fast Ethernet full duplex auto negotiation • Support with TCP Server/Client, UDP and Virtual COM mode • Configurable via serial console, Telnet, Web server, or Windows based utilities • Upgradeable firmware via network The Industrial Serial Server GW51C-MAXI is a gateway between Ethernet TCP/IP and RS-232/422/485 communications. It allows almost any serial device to be connected to a new or existing Ethernet network. By encapsulating serial data and transporting it over Ethernet, GW51C-MAXI offers full-duplex, bi-directional data transmission transparent between serial port and Ethernet network. In industrial and manufacturing automation fields, GW51C-MAXI is used as a field device to connect Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems. Terminal Server main control program executed in this unit makes most use of Ethernet connectivity to drive serial devices. It transforms whatever serial data received to TCP/UDP format then enables a host computer to drive the serial devices through the Ethernet. Atop Virtual COM software provides existing Windows based applications to access serial-Ethernet devices by mapping to remote serial server over Ethernet. Flexible configuration options enable this unit to be setup over Ethernet by Telnet, web browser, serial console, or other Windows utilities. Packed in a rugged metal housing with DIN Railmountable case and 9~30VDC wide power input range, GW51C-MAXI is ideal for almost any industrial and manufacturing automation. Te c h n o l o g i e s Industrial Serial Server GW51C-MAXI Specifications System CPU Flash RAM EEPROM Watchdog Ethernet Compliance Port Transmission Rate Connector Auto MDI/MDI-X Link Mode TCP Server TCP Client UDP Serial Interface Ports Baud Rate Parity Data Bits Stop Bits Flow Control Connector Protection Power Input Consumption Environment Operating Storage Dimension WxHxD Software Configuration Virtual Com Support Protocol Ordering Information GW51C-MAXI-WDT 16-bit x86 Embedded CPU 512 KBytes 512 KBytes SDRAM 512 Bytes Hardware built-in IEEE802.3 1-port 10/100Mbps Auto-detection RJ-45 No Up to 4 connections or Virtual Com mode Single destination Single destination RS-232/422/485 switch selectable 1-port 1200bps~230Kbps None, Odd, Even, Mark, Space 7, 8 1, 2 None, Software Xon/Xoff, Hardware RTS/CTS 5-pin 5.08mm terminal block / 8-pin Mini DIN 15KV ESD DC 9 ~ 30V Max. 2.8W 0ºC~60ºC -40º ~ 85ºC -40º~ 185ºF , 5 ~ 95%RH 45mm x 91mm x 80mm Web Page / Telnet / Serial console / Windows utility Windows port redirection software ICMP, TCP UDP / IP, DHCP client, SNMP, SMTP, Telnet 1-port switch selectable RS-232/422/485 Terminal Block serial serverlity 91.00mm GW51C-MAXI Front Panel RUN COM LAN ON OFF SW2 SW1 DSR RTS/RDTR CTS/T- TxD/R+ DCD RxD/R+ S.G SW1 SW2 MODE OFF RS-232 OFF ON CONSOLE OFF RS-485 ON RS-422 S.G. RTS/RTxD/T+ CTS/TRxD/R+ F.G. VINVIN+ 45.00mm RS-232/422/485 Mini-Din Pin Assignment Mode Switch Table 10/100Mbps Ethernet ON OFF SW2 SW1 LED Indicator Mode Switch DSR RTS/RDTR CTS/T- TxD/R+ DCD RxD/R+ S.G SW1 SW2 MODE OFF RS-232 OFF ON CONSOLE OFF RS-485 ON RS-422 S.G. RTS/RTxD/T+ LAN CTS/T- RxD/R+ RS-232/422/485 Mini-Din Connector RS-232/422/485 Terminal Block Connector |
| More datasheets: FQS4410TF | MV5022A | MV5023A | MV5024A | MV5025A | SEN0204 | AFBR-5302Z | B64290A0618X830 | FAN7071TS | A3992SB-T |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived GW51C-MAXI-WDT Datasheet file may be downloaded here without warranties.