70-841-008

70-841-008 Datasheet

09-91-0500 UK PINS 08-58-0111 DC Outputs Molex 09-50-8121 USA 09-91-1200 UK PINS 08-58-0111 Remote sense/Power fail Molex 22-01-1022 USA 22-01-1023 UK PINS 08-50-0114 Astec Connector Kit #70-841-008, includes all of the above.

Part	Datasheet
70-841-008	70-841-008 (pdf)

PDF Datasheet Preview
110 Watts LPQ110 Series Total Power 80-110 Watts Input Voltage 85-264 VAC 120-300 VDC # of Outputs Quad Special Features • Universal input • High efficiency • Remote sense on main output • Built-in EMI filter • Low output ripple • Adjustable 5 V output • Overvoltage protection • Overload protection • Adjustable floating 4th output On LPQ112 and LPQ113 • Power fail • Optional L bracket -B suffix • Cover kit available LPX110-C Environmental Operating temperature 0° to 50°C ambient derate each output at per degree from 50° to 70°C Electromagnetic susceptibility Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3 Humidity Operating non-condensing 5% to 95% Vibration Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances G peak 5 Hz to 500 Hz, operational Storage temperature -40° to 85°C Temperature coefficient per °C MTBF demonstrated >550,000 hours at full load and 25°C ambient conditions Electrical Specs Input Input range Frequency Inrush current Input current Efficiency EMI filter Safety ground leakage current 85-264 VAC 120-300 VDC 47-440 Hz <18 A peak 115 VAC <36 A peak 230 VAC, cold start 25°C A max. RMS 115 VAC 70% typical at full load FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted mA 50/60 Hz, 264 VAC input Output Maximum power Adjustment range Cross regulation Hold-up time Overload protection Overvoltage protection 80 W for convection 110 W with 30 CFM forced air ±5% min. on main 5-25 V on 4th output on LPQ112 and LPQ113 ±2% on output 1 ±3% on outputs 2, 3 & 4 20 ms 80 W load, 115 VAC nominal line Short circuit protection on all outputs. Case overload protected 110-145% above peak rating VDC on main output. Latching type, recycle AC to reset. Logic Control Power Failure Remote sense Electrical Specs VDE UL CSA NEMKO BABT CB CE 0805/EN60950 IEC950 UL1950 CSA Level 3 EN 60950/EMKO-TUE 74-sec 203 EN60950/BS7002 Certificate and report Mark LVD 11774-3336-1245 LC #84997 E132002 LR53982C P94102464 PS/605823 1423, 1424, 1425 102 America’s USA 1-888-41-ASTEC Europe UK 44 1384 842-211 Asia HK 852-2437-9662 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone 760-930-4600 Facsimile 760-930-0698 Ordering Information Model Number Output Voltage Minimum Load Maximum Load with Convection Cooling Maximum Load with 30 CFM Forced Air Peak Load1 Regulation2 LPQ112 -12 V ±5-25 V 11 A 5A A 3A ±2% ±3% ±5% ±3% LPQ113 -15 V ±5-25 V 11 A 5A A 3A ±2% ±3% ±5% ±3% LPQ114 5V 12 V -12 V 24 V 2A 0A A 11 A 5A A 15 A 9A A 5A ±2% ±3% ±5% +10 / -5% Peak current lasting <30 seconds with a maximum 10% duty cycle. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a µF capacitor at rated line voltage and load ranges. 4th O/P adjustable 5 to 25 V, factory set at 5 V. Minimum loads are required. Note -B suffix added to model number indicates L bracket option. -B Bracket Ripple P/P PARD 3 50 mV 120 mV 120 mV 240 mV, max. 50 mV 150 mV 150 mV 240 mV, max. 50 mV 120 mV 120 mV 240 mV Pin Assignments

PDF Datasheet Preview

110 Watts

LPQ110 Series

Total Power 80-110 Watts Input Voltage 85-264 VAC
120-300 VDC # of Outputs Quad

Special Features
• Universal input
• High efficiency
• Remote sense on main output
• Built-in EMI filter
• Low output ripple
• Adjustable 5 V output
• Overvoltage protection
• Overload protection
• Adjustable floating 4th output

On LPQ112 and LPQ113
• Power fail
• Optional L bracket -B suffix
• Cover kit available LPX110-C

Environmental

Operating temperature 0° to 50°C ambient derate each output at per degree from 50° to 70°C

Electromagnetic susceptibility Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3

Humidity Operating non-condensing 5% to 95%

Vibration Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances G peak 5 Hz to 500 Hz, operational

Storage temperature -40° to 85°C

Temperature coefficient per °C

MTBF demonstrated >550,000 hours at full load and 25°C ambient conditions

Electrical Specs

Input

Input range

Frequency Inrush current

Input current Efficiency EMI filter

Safety ground leakage current
85-264 VAC 120-300 VDC 47-440 Hz <18 A peak 115 VAC <36 A peak 230 VAC, cold start 25°C A max. RMS 115 VAC 70% typical at full load FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted
mA 50/60 Hz, 264 VAC input

Output

Maximum power Adjustment range Cross regulation Hold-up time Overload protection

Overvoltage protection
80 W for convection 110 W with 30 CFM forced air ±5% min. on main 5-25 V on 4th output on LPQ112 and LPQ113 ±2% on output 1 ±3% on outputs 2, 3 & 4 20 ms 80 W load, 115 VAC nominal line Short circuit protection on all outputs. Case overload protected 110-145% above peak rating VDC on main output. Latching type, recycle AC to reset.

Logic Control

Power Failure

Remote sense

Electrical Specs

VDE UL CSA NEMKO

BABT CB CE
0805/EN60950 IEC950 UL1950 CSA Level 3 EN 60950/EMKO-TUE 74-sec 203 EN60950/BS7002 Certificate and report Mark LVD
11774-3336-1245 LC #84997 E132002 LR53982C P94102464

PS/605823 1423, 1424, 1425
102 America’s USA 1-888-41-ASTEC

Europe UK 44 1384 842-211

Asia HK 852-2437-9662

AMERICAS
5810 Van Allen Way Carlsbad, CA 92008 Telephone 760-930-4600 Facsimile 760-930-0698
Ordering Information

Model Number

Output Voltage

Minimum Load

Maximum Load with Convection Cooling

Maximum Load with 30 CFM Forced Air

Peak Load1

Regulation2

LPQ112
-12 V
±5-25 V
11 A 5A A 3A
±2%
±3%
±5%
±3%

LPQ113
-15 V
±5-25 V
11 A 5A A 3A
±2%
±3%
±5%
±3%

LPQ114
5V 12 V -12 V 24 V
2A 0A A
11 A 5A A
15 A 9A A 5A
±2% ±3% ±5% +10 / -5%

Peak current lasting <30 seconds with a maximum 10% duty cycle.

At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.

Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a µF capacitor at rated line voltage and load ranges.
4th O/P adjustable 5 to 25 V, factory set at 5 V.

Minimum loads are required. Note -B suffix added to model number indicates L bracket option.
-B Bracket

Ripple P/P PARD 3
50 mV 120 mV 120 mV 240 mV, max.
50 mV 150 mV 150 mV 240 mV, max.
50 mV 120 mV 120 mV 240 mV

Pin Assignments

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 70-841-008 Datasheet file may be downloaded here without warranties.

Datasheet ID: 70-841-008 518827