ATH10K12-9SJ

ATH10K12-9SJ Datasheet


ATH10

Part Datasheet
ATH10K12-9SJ ATH10K12-9SJ ATH10K12-9SJ (pdf)
Related Parts Information
ATH10K12-9SJL ATH10K12-9SJL ATH10K12-9SJL
ATH10T05-9SJ ATH10T05-9SJ ATH10T05-9SJ
ATH10T033-9SJ ATH10T033-9SJ ATH10T033-9SJ
PDF Datasheet Preview
10Amps

ATH10

Total Power Input Voltages No. of Outputs:
55W 3.3V, 5V, 12V Single

Electrical Specs

Input

Input Range
- 3.6V
- 5.5V
- 13.2V

Under Voltage Lockout with hysterisis

Efficiency
up to 92%

Special Features
• Point-of-Load Alliance product
• Open frame TH or SMT termination
• Auto-Track Sequencing
• Margin Up/Down Controls
• Remote sense compensation
• Output Voltage Adjust Resistor Programming
• Under Voltage Lockout
• Pre-Biased start-up2
• Output On/Off Inhibit
• -40°C to +85°C Ambient Air Operation
• Non Isolated module

Output

Overall Regulation Noise/Ripple

Remote sense Transient Response

Over Current Protection
1% of Vo Typ 30mV Typ 2.5Vo and below 1% Vo Typ Vo > 2.5V Up to 300mV max 100mV typical for 3.3Vo for 50% to 100% IO,MAX step change 70us recovery time Co = 330uF 175% IO,MAX typical autorecovery

Control

Inhibit On/Off Output Voltage Adjust Output Margin

Output Auto-Track

Positive Enable Logic See output range on page 2 ±5% VO,NOM See Note 5

Environmental

Ambient air operating temperature range -40°C to +85°C Storage temperature -40°C to +125°C Calculated MTBF > TBA

Specifications subject to change without notice

Safety

UL,cUL 60950 Recognition Pending EN 60950 through TUV or VDE Pending

North America USA 1-888-41-ASTEC

Europe UK 44 1384 842-211Asia HK 852-2437-9662

AMERICAS
5810 Van Allen Way Carlsbad, CA 92008 Telephone 760-930-4600 Facsimile 760-930-0698

EUROPE

Astec House, Waterfront Business Park Merry Hill, Dudley

West Midlands, DY5 1LX, UK Telephone 44 1384 842-211 Facsimile 44 1384 843-355

ASIA

Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road

Fwai Fong, New Territories Hong Kong

Telephone 852-2437-9662 Facsimile 852-2402-4426
Ordering Information

Input Voltage

Output Voltage

Output3 Current
3.0V to 3.6V 4.5V to 5.5V 10.8V to 13.2V
0.8V to 2.5V
0.8V to 3.6V
1.2V to 5.5V

OPTIONS “-9J” - Output Trim, TH termination, Tray Packaging
“-9SJ” - Output Trim, SMT termination, Tray Packaging “-9S” - Output Trim, SMT Ternination, T&R packaging

Efficiency4
92% 92% 92%

Model Number

ATH10T033-9 S J ATH10T05-9 S J ATH10K12-9 S J

Pin Assignments

Single Output

PINS

Inhibit

Vo Adjust

Vo Sense

Vout

Track

Margin Down 9

Margin Up 10

Notes Nominal values apply with sense pins
connected to +Vout and Ground Return with other control pins unconnected.

Pre-Bias startup capability exists for 3.3Vin and 5Vin devices.

Output derating applies at elevated ambient temperature.

Typical efficiency taken at TBA load, 2.5V output 3.3Vin device TBA load, 3.3V output 5Vin device TBA load, 5V output 12Vin device .

Consult the technical reference notes when available.

Mechanical Dimensions are nominal values.

Auto-Track is a trademark of Texas Instruments.

Specification subject to change without notice.

Through-hole and SMT Outline [in mm ]
More datasheets: L6R36-090 | L6R48-090 | 3600S-1-501 | 3600S-1-103 | 42-00008 | 42-00006 | AD5291BRUZ-50-RL7 | ATH10K12-9SJL | ATH10T05-9SJ | ATH10T033-9SJ


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ATH10K12-9SJ Datasheet file may be downloaded here without warranties.

Datasheet ID: ATH10K12-9SJ 518818