3600S-1-103

3600S-1-103 Datasheet

3600 - 10-Turn Precision Potentiometer

Part	Datasheet
3600S-1-103	3600S-1-103 (pdf)

Related Parts	Information
3600S-1-501	3600S-1-501

PDF Datasheet Preview
• Bushing mount • Cost saving pre-phased • Highly readable clockface readout • Easy mounting 3600 - 10-Turn Precision Potentiometer Electrical Characteristics1 Standard Resistance Range to 100 K ohms Total Resistance Tolerance % Effective Electrical Angle ° nominal Absolute Minimum ohm or % maximum whichever is greater ohms ENR maximum Dielectric Withstanding Voltage MIL-STD-202, Method 301 Sea Level VAC minimum 70,000 VAC minimum Power Rating Voltage Limited By Power Dissipation or 385 VAC, Whichever is Less +25 °C watts +85 watt Insulation Resistance 500 megohms minimum Resolution recommended part numbers Accuracy Correlation of Dial Readout to Voltage Ratio Output % voltage ratio Repeatability of Dial Readout % voltage ratio Environmental Characteristics1 Operating Temperature °C to +85 °C Storage Temperature °C to +85 °C Temperature Coefficient Over Storage Temperature Range........................±50 ppm/°C maximum/unit Vibration G Mechanical Characteristics1 Stop N-cm 20 oz.-in. minimum Mechanical Angle ° +20 °, -0 ° Torque Starting to N-cm to oz.-in. maximum Torque Running N-cm oz.-in. maximum Variation N-cm oz.-in. maximum N-cm 15-18 lb.-in. maximum Backlash ° maximum 17 gm Terminals J-Hooks Soldering Condition ....................Recommended hand soldering using Sn95/Ag5 no clean solder, wire diameter. Maximum temperature 399 °C 750 °F for 3 seconds. No wash process to be used with no clean flux. name and part number, resistance value and tolerance, linearity tolerance, wiring diagram, and date code. 1At room ambient +25 °C nominal and humidity nominal, except as noted. Recommended Part Numbers 3600S-1-102 3600S-1-502 3600S-1-103 Resistance 1,000 5,000 10,000 Resolution % BOLDFACE LISTINGS ARE IN STOCK AND READILY AVAILABLE THROUGH DISTRIBUTION. FOR OTHER OPTIONS CONSULT FACTORY. NOBPOT DIA. ± ± 11/32 NON-TURN PIN EXTENDS ± ± 3/4 DIA. PILOT DIA. ± ± 3/8 "- 32 UNEF-2A THD MAX. - MIN. PANEL THICKNESS #21 AWG GOLD PLATED GRADE A NICKEL SOLDER LUGS DIA. LOCATED ON RADIUS NON-TURN PIN EXTENDS ± ± ± 1/8 ±1/32 ± ± I.D. ± 3/16 ± 1/32 DIA.

PDF Datasheet Preview

• Bushing mount
• Cost saving pre-phased
• Highly readable clockface readout
• Easy mounting
3600 - 10-Turn Precision Potentiometer

Electrical Characteristics1

Standard Resistance Range to 100 K ohms Total Resistance Tolerance % Effective Electrical Angle ° nominal Absolute Minimum ohm or % maximum whichever is greater ohms ENR maximum Dielectric Withstanding Voltage MIL-STD-202, Method 301

Sea Level VAC minimum 70,000 VAC minimum Power Rating Voltage Limited By Power Dissipation or 385 VAC, Whichever is Less +25 °C watts +85 watt Insulation Resistance 500 megohms minimum Resolution recommended part numbers Accuracy Correlation of Dial Readout to Voltage Ratio Output % voltage ratio Repeatability of Dial Readout % voltage ratio

Environmental Characteristics1

Operating Temperature °C to +85 °C Storage Temperature °C to +85 °C Temperature Coefficient Over Storage Temperature Range........................±50 ppm/°C maximum/unit Vibration G

Mechanical Characteristics1

Stop N-cm 20 oz.-in. minimum Mechanical Angle ° +20 °, -0 ° Torque Starting to N-cm to oz.-in. maximum Torque Running N-cm oz.-in. maximum

Variation N-cm oz.-in. maximum N-cm 15-18 lb.-in. maximum Backlash ° maximum 17 gm Terminals J-Hooks Soldering Condition ....................Recommended hand soldering using Sn95/Ag5 no clean solder,
wire diameter. Maximum temperature 399 °C 750 °F for 3 seconds. No wash process to be used with no clean flux.
name and part number, resistance value and tolerance, linearity tolerance, wiring diagram, and date code.
1At room ambient +25 °C nominal and humidity nominal, except as noted.

Recommended Part Numbers
3600S-1-102 3600S-1-502 3600S-1-103

Resistance
1,000 5,000 10,000

Resolution %

BOLDFACE LISTINGS ARE IN STOCK AND READILY AVAILABLE THROUGH DISTRIBUTION.

FOR OTHER OPTIONS CONSULT FACTORY.

NOBPOT

DIA.
± ±
11/32

NON-TURN PIN EXTENDS ± ±
3/4 DIA.

PILOT DIA. ± ±
3/8 "- 32 UNEF-2A THD

MAX. - MIN.

PANEL THICKNESS
#21 AWG GOLD PLATED GRADE A

NICKEL SOLDER LUGS

DIA.

LOCATED ON RADIUS

NON-TURN PIN EXTENDS
± ±
± 1/8 ±1/32
± ±

I.D.
± 3/16 ± 1/32

DIA.

More datasheets: L6R48-300 | L6R36-300 | L6R36-360 | L6R36-240 | L6R36-120 | L6R48-120 | L6R48-240 | L6R36-090 | L6R48-090 | 3600S-1-501

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 3600S-1-103 Datasheet file may be downloaded here without warranties.

Datasheet ID: 3600S-1-103 522059