AA60A-048L-050D033N

AA60A-048L-050D033N Datasheet

AA60A

Part	Datasheet
AA60A-048L-050D033N	AA60A-048L-050D033N (pdf)

Related Parts	Information
AA60A-048L-050D033-6-P1	AA60A-048L-050D033-6-P1
AA60A-048L-050D033N-6-P1	AA60A-048L-050D033N-6-P1
AA60A-048L-033D025	AA60A-048L-033D025
AA60A-048L-050D033	AA60A-048L-050D033
AA60A-048L-033D025N	AA60A-048L-033D025N

PDF Datasheet Preview
Astec Industry Standard 75 Watts AA60A Total Power Input Voltages No. of Outputs: 75 Watts 48V Dual Special Features • Output loadsharing • 48VDC Input • Unencapsulated x pkg. • 100°C Baseplate temperature • Trim feature, both rails • Industry standard pin-out • Enable on/off • Thermal protection • 5.0V/3.3V dual outputs Environmental Operating case temperature range -40°C to +105°C Storage temperature -40°C to +105°C Humidity 5% to 100% non-condensing Safety UL 1950 File E494367 CAN22.2-950 TUV EN60950 File DE3-5117A Electrical Specs Input 36 to 75 VDC 48Vdc Nom. 6.8mF typical 82% typical Fuse recommended 3A.MB 100V for 100mS <200mA P-P Output Voltage tolerance Line regulation Load regulation Ripple/noise Temperature coefficient Short circuit protection Overvoltage protection Transient response Switching frequency + 1% Main Output 1 Output 2 ±1% Output 1 Output 2 Low Line - High Line Full Load Output 1 Output 2 10% to 100% load 1A minimum load per rail required 100mV P-P max +0.02%/°C max Continuous - Power Cycle Shutdown latching 4% Vo max recovery <100msec 25% to 75% step load change 400 kHz typical Control Enable Input current enable off Output trim Thermal shutdown Isolation I/O isolation resistance on to 5.5Vdc or open circuit off = 0 to 0.8Vdc Ref. to -Vin. TTL compatible <2ma. Both outputs ±10% minimum 110°C typ baseplate temperature Auto reset 1500 VDC 1 x 109 ohms America’s USA 1-888-41-ASTEC Europe UK 44 1384 842-211 Asia HK 852-2437-9662 AA60A AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone 760-930-4600 Facsimile 760-930-0698 EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone 44 1384 842-211 Facsimile 44 1384 843-355 ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Ordering Information Input Voltage 36 - 75VDC 36 - 75VDC Output 1 Voltage 3.3V 19A 5.0V 15A Output 2 Voltage 2.5V 19A 3.3V 15A Note Enable Function "N" = negative logic enable without "N" = positive enable Trim Feature “-PI” suffix = IPD Trim equivalent Maximum output power not to exceed 75W total for 5/3.3V version 15A . The sum of output currents not to exceed 15amps for 5/3.3V 19A max for 3.3/2.5V . Any output loading ratio within the maximum specified limits is possible. Model Number AA60A-048L-033D025 AA60A-048L-050D033 Pin Assignments Single Output -Vin Case Enable on/off Vin+ V2 Rtn V2 Trim V2 V1 Rtn V1 Trim V1 20MHz bandwidth. An external 2.2mf ceramic capacitor is recommended to be placed from +V out to -V out. Requires a 2.2mf, 100V film capacitor connected between +V in and -V in to meet FCC class A and ETS300-386-1 requirements for conducted noise. All specifications are typical at nominal line, full load, and 25°C unless otherwise noted. All specifications subject to change without notice. Mechanical drawings are for reference only. Please refer to the Technical Reference Notes for more information. Warranty 1 yr [1207] MIN. Mounting Inserts M3 X 4 places DIA. TYP. Astec Industry Standard

PDF Datasheet Preview

Astec Industry Standard
75 Watts

AA60A

Total Power Input Voltages No. of Outputs:
75 Watts 48V Dual

Special Features
• Output loadsharing
• 48VDC Input
• Unencapsulated x pkg.
• 100°C Baseplate temperature
• Trim feature, both rails
• Industry standard pin-out
• Enable on/off
• Thermal protection
• 5.0V/3.3V dual outputs

Environmental

Operating case temperature range -40°C to +105°C Storage temperature -40°C to +105°C Humidity 5% to 100% non-condensing

Safety

UL 1950 File E494367

CAN22.2-950

TUV EN60950 File DE3-5117A

Electrical Specs

Input
36 to 75 VDC 48Vdc Nom. 6.8mF typical 82% typical

Fuse recommended 3A.MB 100V for 100mS <200mA P-P

Output

Voltage tolerance

Line regulation

Load regulation

Ripple/noise Temperature coefficient Short circuit protection Overvoltage protection Transient response Switching frequency
+ 1% Main Output 1 Output 2 ±1% Output 1 Output 2 Low Line - High Line Full Load Output 1 Output 2 10% to 100% load 1A minimum load per rail required 100mV P-P max +0.02%/°C max Continuous - Power Cycle Shutdown latching 4% Vo max recovery <100msec 25% to 75% step load change 400 kHz typical

Control

Enable

Input current enable off Output trim Thermal shutdown

Isolation

I/O isolation resistance
on to 5.5Vdc or open circuit off = 0 to 0.8Vdc Ref. to -Vin. TTL compatible <2ma. Both outputs ±10% minimum 110°C typ baseplate temperature Auto reset
1500 VDC 1 x 109 ohms

America’s USA 1-888-41-ASTEC

Europe UK 44 1384 842-211 Asia HK 852-2437-9662

AA60A

AMERICAS
5810 Van Allen Way Carlsbad, CA 92008 Telephone 760-930-4600 Facsimile 760-930-0698

EUROPE

Astec House, Waterfront Business Park Merry Hill, Dudley

West Midlands, DY5 1LX, UK Telephone 44 1384 842-211 Facsimile 44 1384 843-355

ASIA

Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road

Fwai Fong, New Territories Hong Kong
Ordering Information

Input Voltage
36 - 75VDC 36 - 75VDC

Output 1 Voltage
3.3V 19A 5.0V 15A

Output 2 Voltage
2.5V 19A 3.3V 15A

Note Enable Function
"N" = negative logic enable without "N" = positive enable Trim Feature “-PI” suffix = IPD Trim equivalent

Maximum output power not to exceed 75W total for 5/3.3V version 15A . The sum of output currents not to exceed 15amps for 5/3.3V 19A max for 3.3/2.5V . Any output loading ratio within the maximum specified limits is possible.

Model Number

AA60A-048L-033D025 AA60A-048L-050D033

Pin Assignments

Single Output
-Vin Case Enable on/off Vin+ V2 Rtn V2 Trim V2 V1 Rtn V1 Trim V1
20MHz bandwidth. An external 2.2mf ceramic capacitor is recommended to be placed from +V out to -V out.

Requires a 2.2mf, 100V film capacitor connected between +V in and -V in to meet FCC class A and ETS300-386-1 requirements for conducted noise.

All specifications are typical at nominal line, full load, and 25°C unless otherwise noted.

All specifications subject to change without notice. Mechanical drawings are for reference only.

Please refer to the Technical Reference Notes for more information.

Warranty 1 yr
[1207]

MIN.

Mounting

Inserts M3 X 4 places

DIA. TYP.

Astec Industry Standard

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AA60A-048L-050D033N Datasheet file may be downloaded here without warranties.

Datasheet ID: AA60A-048L-050D033N 518800