VRM10-85-12-UJ

VRM10-85-12-UJ Datasheet

VRM10 Series

Part	Datasheet
VRM10-85-12-UJ	VRM10-85-12-UJ (pdf)

Related Parts	Information
VRM10-80-12-PJ	VRM10-80-12-PJ

PDF Datasheet Preview
VRM10 Series Single Output Input Voltage 12 Vdc # of Outputs Single Embedded Power for Business-Critical Continuity 1 of 10 Special Features • Designed for use in low profile applications where VRM10.0 or specifications are required • Output current up to 105 A continuous • Open-collector power good PWRGD output • 6-bit microprocessor voltage identification input VID • Vdc to Vdc in 12.5mV steps • Allows dynamic VID code changes • Differential remote sense for improved load regulation • Vertical plug-in to standard motherboard connector • Selectable output load line impedances, via LL0 and LL1 • Output over-voltage signal OVP • Monotonic output turn-on and turn-off with no overshoot or undershoot • RoHS compliant • 2 Year Warranty Safety VDE Certificate No. 2487000-3336-0016 The VRM10 non-isolated DC-DC converters are designed to meet the exceptionally fast transient response requirements of today’s microprocessors and fast switching logic in a compact size at a very affordable price. Advanced circuit techniques, component selection and placement optimization, state-of-the-art thermal packaging, and surface-mount technologies provide a high power density, highly reliable, and very precise voltage regulation system for advanced microprocessors. Embedded Power for Business-Critical Continuity Specifications Unless otherwise stated, all specifications are typical at nominal input, maximum continuous rated load at 25 °C and voltages are referenced to Vin-. 2 of 10 OUTPUT SPECIFICATIONS Voltage adjustability See VID codes,Table 3 Vdc Output current Iout VRM10-85-12-UY VRM10-80-12-PY VRM10-105-12-EJ Continuous Peak non-sustained Continuous Peak non-sustained Continuous Peak non-sustained 0 A min. 85 A max. 100 A max. 80 A max. 91 A max. 105 A max. 120 A max. Load line LL adjustability See LL codes, Table 1 Output voltage Vout Vo max VID - Rout * Iout V Vo sen+ minus Vo sen- Vo min VID - Rout * Iout - 0.040V -U/-E See Notes 3, B Vo min VID - Rout * Iout - 0.038V -P Where VID = programmed voltage V Rout Fixed or programmable

PDF Datasheet Preview

VRM10 Series

Single Output

Input Voltage 12 Vdc # of Outputs Single

Embedded Power for Business-Critical Continuity
1 of 10

Special Features
• Designed for use in low profile applications where VRM10.0 or specifications are required
• Output current up to 105 A continuous
• Open-collector power good PWRGD output
• 6-bit microprocessor voltage identification input VID
• Vdc to Vdc
in 12.5mV steps
• Allows dynamic VID code changes
• Differential remote sense for improved load regulation
• Vertical plug-in to standard motherboard connector
• Selectable output load line impedances, via LL0 and LL1
• Output over-voltage signal OVP
• Monotonic output turn-on and turn-off with no overshoot or undershoot
• RoHS compliant
• 2 Year Warranty

Safety

VDE Certificate No. 2487000-3336-0016

The VRM10 non-isolated DC-DC converters are designed to meet the exceptionally fast transient response requirements of today’s microprocessors and fast switching logic in a compact size at a very affordable price. Advanced circuit techniques, component selection and placement optimization, state-of-the-art thermal packaging, and surface-mount technologies provide a high power density, highly reliable, and very precise voltage regulation system for advanced microprocessors.

Embedded Power for Business-Critical Continuity

Specifications

Unless otherwise stated, all specifications are typical at nominal input, maximum continuous rated load at 25 °C and voltages are referenced to Vin-.
2 of 10

OUTPUT SPECIFICATIONS

Voltage adjustability

See VID codes,Table 3 Vdc

Output current Iout VRM10-85-12-UY

VRM10-80-12-PY

VRM10-105-12-EJ

Continuous Peak non-sustained Continuous Peak non-sustained Continuous Peak non-sustained
0 A min. 85 A max. 100 A max. 80 A max. 91 A max. 105 A max. 120 A max.

Load line LL adjustability See LL codes, Table 1

Output voltage Vout Vo max

VID - Rout * Iout V

Vo sen+ minus Vo sen- Vo min VID - Rout * Iout - 0.040V -U/-E

See Notes 3, B

Vo min VID - Rout * Iout - 0.038V -P

Where VID = programmed voltage V

Rout

Fixed or programmable

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived VRM10-85-12-UJ Datasheet file may be downloaded here without warranties.

Datasheet ID: VRM10-85-12-UJ 518508