SIL10E-05S1V5-V

SIL10E-05S1V5-V Datasheet

SIL10E Series Single output

Part	Datasheet
SIL10E-05S1V5-V	SIL10E-05S1V5-V (pdf)

Related Parts	Information
SIL10E-05S0V8-H	SIL10E-05S0V8-H
SIL10E-05S1V5-H	SIL10E-05S1V5-H
SIL10E-05S3V3-V	SIL10E-05S3V3-V
SIL10E-05S3V3-H	SIL10E-05S3V3-H
SIL10E-05S2V5-V	SIL10E-05S2V5-V
SIL10E-05S1V2-H	SIL10E-05S1V2-H
SIL10E-05S2V5-H	SIL10E-05S2V5-H
SIL10E-05S2V0-V	SIL10E-05S2V0-V
SIL10E-05W3V3-H	SIL10E-05W3V3-H
SIL10E-05W3V3-V	SIL10E-05W3V3-V
SIL10E-05S2V0-H	SIL10E-05S2V0-H
SIL10E-05S0V8-V	SIL10E-05S0V8-V
SIL10E-05S1V8-H	SIL10E-05S1V8-H
SIL10E-05S1V8-V	SIL10E-05S1V8-V
SIL10E-05S1V2-V	SIL10E-05S1V2-V
SIL10E-05S1V0-V	SIL10E-05S1V0-V
SIL10E-05S1V0-H	SIL10E-05S1V0-H

PDF Datasheet Preview
SIL10E Series Single output DC/DC CONVERTERS E Class Non-isolated • 10A Current rating • Input voltage range 3.0V - 5.5V • Output voltage range 0.8V - 3.63V • Ultra high efficiency 95% 5Vin and 3.3Vout • Extremely low internal power dissipation • Minimal thermal design concerns • Designed in reliability MTBF of >7 million hours per Telcordia SR-332 • Ideal solution where board space is at a premium or tighter card pitch is required • Industry standard footprint and pin out 1 NEW Product The SIL10E series are non-isolated DC/DC converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from either a 5V or a 3.3V source. The SIL10E offers a range of fixed outputs and one wide trim output unit at an industry leading 10A which allows maximum design flexibility and a pathway for future upgrades. The SIL10E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface mount technology and automated manufacturing techniques, the SIL10E offers compact size and efficiencies of up to All specifications are typical at nominal input, full load at 25°C unless otherwise stated 2 YEAR WARRANTY SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage adjustability Fixed output versions 5Vin with wide trim 3.3Vin with wide trim ±10% 3.6V to 0.8V 2.75V to 0.8V Setpoint accuracy Line regulation Load regulation Minimum load Overshoot/undershoot None Ripple and noise 0 to 20MHz BW 50mV pk-pk 25mV rms max. Temperature co-efficient ±0.01%/ºC Transient response 50mV max. deviation 50µs recovery to within Remote sense 10% Vo compensation INPUT SPECIFICATIONS Input voltage range Input current No load Input current max. Input current ripple Remote ON/OFF Start-up time to 5.5VDC 70mA 8A max. Io max. and Vout = 3.3V 65mA rms See Note 1 20ms EMC CHARACTERISTICS Electrostatic discharge Conducted immunity Radiated immunity EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 GENERAL SPECIFICATIONS Efficiency

PDF Datasheet Preview

SIL10E Series Single output

DC/DC CONVERTERS E Class Non-isolated
• 10A Current rating
• Input voltage range 3.0V - 5.5V
• Output voltage range 0.8V - 3.63V
• Ultra high efficiency 95% 5Vin and 3.3Vout
• Extremely low internal power dissipation
• Minimal thermal design concerns
• Designed in reliability MTBF of >7 million hours
per Telcordia SR-332
• Ideal solution where board space is at a premium
or tighter card pitch is required
• Industry standard footprint and pin out
1 NEW Product

The SIL10E series are non-isolated DC/DC converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from either a 5V or a 3.3V source. The SIL10E offers a range of fixed outputs and one wide trim output unit at an industry leading 10A which allows maximum design flexibility and a pathway for future upgrades. The SIL10E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface mount technology and automated manufacturing techniques, the SIL10E offers compact size and efficiencies of up to

All specifications are typical at nominal input, full load at 25°C unless otherwise stated
2 YEAR WARRANTY

SPECIFICATIONS

OUTPUT SPECIFICATIONS

Voltage adjustability

Fixed output versions 5Vin with wide trim 3.3Vin with wide trim
±10% 3.6V to 0.8V 2.75V to 0.8V

Setpoint accuracy

Line regulation

Load regulation

Minimum load

Overshoot/undershoot

None

Ripple and noise 0 to 20MHz BW
50mV pk-pk 25mV rms max.

Temperature co-efficient
±0.01%/ºC

Transient response
50mV max. deviation 50µs recovery to within

Remote sense
10% Vo compensation

INPUT SPECIFICATIONS

Input voltage range

Input current

No load

Input current max.

Input current ripple Remote ON/OFF Start-up time
to 5.5VDC 70mA
8A max. Io max. and Vout = 3.3V 65mA rms See Note 1 20ms

EMC CHARACTERISTICS

Electrostatic discharge Conducted immunity Radiated immunity

EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3

GENERAL SPECIFICATIONS

Efficiency

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SIL10E-05S1V5-V Datasheet file may be downloaded here without warranties.

Datasheet ID: SIL10E-05S1V5-V 518491