PTH03010YAZT

PTH03010YAZT Datasheet


PTHxx010Y Vin

Part Datasheet
PTH03010YAZT PTH03010YAZT PTH03010YAZT (pdf)
Related Parts Information
PTH12010YAZ PTH12010YAZ PTH12010YAZ
PTH12010YAD PTH12010YAD PTH12010YAD
PTH03010YAZ PTH03010YAZ PTH03010YAZ
PTH12010YAZT PTH12010YAZT PTH12010YAZT
PTH05010YAD PTH05010YAD PTH05010YAD
PTH05010YAZ PTH05010YAZ PTH05010YAZ
PTH05010YAZT PTH05010YAZT PTH05010YAZT
PTH03010YAD PTH03010YAD PTH03010YAD
PDF Datasheet Preview
Embedded Power for Business-Critical Continuity

PTHxx010Y Vin

Total Power 27 Watts # of Outputs Single

Special Features
• VTT bus termination output the system VREF
• 15 A output current
• 5, or 12 Vdc input voltage
• DDR and QDR compatible
• ON/OFF inhibit for VTT stand-
by
• Under-voltage lockout
• Operating temperature range:
-40 °C to +85 °C
• Efficiencies up to 91%
• Output overcurrent protection
non-latching, auto-reset
• Point-of-Load-Alliance POLA
compatible
• Available RoHS compliant
• 2 Year Warranty

Specifications

Input current Input voltage range:

Undervoltage lockout PTH03010Y

PTH05010Y

PTH12010Y

Input capacitance See Note 3, page 3 Remote ON/OFF:

No load

PTH03010Y PTH05010Y PTH12010Y
10 mA
- Vdc - Vdc - Vdc

Vin increasing Vin decreasing

V typ., V max. V min., V typ.

Vin increasing Vin decreasing

V typ., V max. V min., V typ.

Vin increasing Vin decreasing

V typ., V max. V min., V typ.

PTH03010Y & PTH05010Y 470 µF

PTH12010Y
560 µF

Positive logic

All specifications are typical at nominal input, VREF = V, full load at 25 °C unless otherwise stated Cin, Co1, C Co2 = typical value

Safety
• UL/cUL CAN/CSA-C22.2 No. 60950 File No. E174104
• TÜV Product Service

EN60950 Certificate No.

B 04 06 38572 044
• CB Report and Certificate
to IEC60950, Certificate No.

US/8292/UL

Embedded Power for Business-Critical Continuity

Specifications Continued
Ordering Information

Output Power max

Input Voltage
27 W 27 W
- Vdc - Vdc
- Vdc

VTT Range - Vdc - Vdc - Vdc

Output Currents
± 15 A
± 15 A
± 15 A

Part Number System with Options PTH05010YAST

Product Family Point of Load Alliance

Compatible

Efficiency max
88% 88% 85%

PTH03010Y PTH05010Y PTH12010Y

Packaging Options No Suffix = Trays T = Tape and Reel 7

Input Voltage 03 = V, 05 = 5 V
and 12 = 12 V

Output Current 01 = 15 A

Mechanical Package Always 0

Mounting Option 8 D = Horizontal Through-Hole RoHS 6/6 H = Horizontal Through-Hole RoHS 5/6 S = Surface-Mount Solder Ball RoHS 5/6 Z = Surface-Mount Solder Ball RoHS 6/6

Pin Option A = Through-Hole Std. Pin Length A = Surface-Mount Tin/Lead Solder Ball

Output Voltage Code Y = DDR Module

Notes 1 Rating is conditional on the module being soldered to a 4 layer PCB
with 1 oz. copper. See the SOA curves or contact the factory for appropriate derating. 2 This control pin has an internal pull-up to the input voltage Vin. If it is left open-circuit the module will operate when input power is applied. A small low-leakage < 100 nA MOSFET is recommended for control. For further information, consult Application Note 3 An input capacitor is required for proper operation. The capacitor must be rated for a minimum of 800 mA rms of ripple current. 4 The typical value of external output capacitance value ensures that afoyr be possible when the measured peak change in output current is consistently less than 3 A. Test conditions were 15 A/µs load step, A to A.
5 This is the calculated maximum. The minimum ESR limitation will often result in a lower value. Consult Application Note 177 for further details.
6 This is the typical ESR for all the electrolytic non-ceramic output capacitance. Use 7 mΩ as the minimum when using max-ESR values to calculate.
7 Tape and reel packaging only available on the surface-mount versions.
8 To order Pb-free RoHS compatible surface-mount parts replace the mounting option ‘S’ with ‘Z’, e.g. PTHXX010YAZ. To order Pbfree RoHS compatible through-hole parts replace the mounting option ‘H’ with ‘D’, e.g. PTHXX010YAD.
9 NOTICE Some models do not support all options. Please contact your local Emerson Network Power representative or use the on-line model number search tool at to find a suitable alternative.

Embedded Power for Business-Critical Continuity

Characteristic Data

OUTPUT CURRENT A
16 14 12 10
8 6 4 2 0
0 10 20 30 40 50 60 70 80

AMBIENT TEMPERATURE ºC

Nat conv 100 LFM 200 LFM

Figure 1 - Safe Operating Area Vin = V, VREF = V, Iout = 15 A See Note A
More datasheets: FPN560A | FPN560 | FPN560A_D26Z | FPN560A_D27Z | FPN560A_D75Z | 5203 | CPPV9 | PTH12010YAZ | PTH12010YAD | PTH03010YAZ


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PTH03010YAZT Datasheet file may be downloaded here without warranties.

Datasheet ID: PTH03010YAZT 518484