LPS155-C
LPS155-C Datasheet
LPS150 Series
| Part | Datasheet |
|---|---|
LPS155-C |
LPS155-C (pdf) |
| Related Parts | Information |
|---|---|
LPS153 |
LPS153 |
LPS153-C |
LPS153-C |
LPS152-C |
LPS152-C |
LPS155 |
LPS155 |
LPS152 |
LPS152 |
| PDF Datasheet Preview |
|---|
| Embedded Power for Business-Critical Continuity LPS150 Series 150 Watts Total Power 100 - 150 Watts Input Voltage 85-132 /170-264 Vac 220 - 300 Vdc # of Outputs Single 1 of 3 Special Features • Auto ranging input • Remote sense • Remote inhibit • Power fail • Single wire current sharing • Built-in EMI filter • Low output ripple • Adjustable output • 135 khz switching frequency • Overvoltage protection • Overload protection • Optional cover -C suffix Safety UL CSA NEMKO BABT CB CE 0805/EN60950 IEC950 11774-3336-1260 LC#88585 UL1950 EI32002 CSA Level 3 LR53982 EN 60950/EMKO-TUE P95102999 74-sec 203 EN60950/BS7002 607019 Certificate and report 2062 Mark LVD Electrical Specifications Input Input 85 - 132 Vac or 170 - 264 Vac automatically selected 220 - 300 Vdc Frequency 47 - 63 Hz Inrush current 38 A max, cold start 25 °C Efficiency EMI filter 75% typical at full load FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted Safety ground leakage current Output Maximum power mA 50/60 Hz, 264 VAC input 110 W convection 75 W with cover 150 W with 30 CFM forced air 130 W with cover Adjustment range ± 5% minimum on the main outputs Hold-up time 20 ms 110 W load, 115/230 Vac nominal lline Overload protection circuit protection. Case overload protected 110% to 145% above peak rating Overvoltage protection V output to VDC. Other outputs 10% to 25% above nominal output Logic Control Power failure Remote inhibit Remote sense TTL Logic signal goes high 50 - 150 msec after 5 V output. It goes low at least 3 ms before loss of regulation Requires an external TTL high signal to inhibit outputs Embedded Power for Business-Critical Continuity Environmental Specifications Operating temperature 0° to 50 °C ambient derate each output at per degree from 50° to 70 °C Storage temperature -40 °C to +85 °C Temperature coefficient ± per °C Electromagnetic susceptibility: Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3 Ordering Information Model Number Output Voltage Minimum Load Maximum Load Maximum Load with Convection with 30CFM Cooling forced Air Peak Load 1 Regulation 2 Ripple P/P PARD 3 LPS152 ± 2% LPS153 12 - 15 V ± 2% LPS155 24 - 28 V ± 2% Peak current lasting < 30 seconds with a maximum 10% duty cycle. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 50 mV 150 mV 280 mV, max. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a µF capacitor at rated line voltage and load ranges. Pin Assignments Connector LPS152 SK1 PIN 1 INHIBIT -ve PIN 2 INHIBIT +ve PIN 3 VCC PIN 4 No Connection PIN 5 COMMON PIN 6 -SENSE PIN 7 +SENSE PIN 8 C SHARE SK2 PIN 5 COMMON PIN 6 PIN REMOVED PIN 7 POK SK3 TB-1 COMMON TB-2 +5 V SK4 PIN 1 GROUND PIN 3 LINE PIN 5 NEUTRAL LPS153 INHIBIT -ve INHIBIT +ve VCC No Connection COMMON -SENSE +SENSE C SHARE COMMON PIN REMOVED POK +5 V GROUND LINE NEUTRAL LPS155 INHIBIT -ve INHIBIT +ve VCC No Connection COMMON -SENSE +SENSE C SHARE COMMON PIN REMOVED POK COMMON +5 V GROUND LINE NEUTRAL Connectors AC input Molex 09-50-8051 USA SK4 : Molex 09-91-0500 UK PINS 08-58-0111 Power fail Molex 09-50-8031 USA SK2 : Molex 09-91-0300 UK PINS 08-58-0111 Remote Molex 51110-0851 USA sense/ PINS 50394-8100 Remote |
| More datasheets: UPOS-P03-B110 | UPOS-P01-B110 | 96URP-RDMA04-RGNCB | FDS4072N7 | 204-10SURC/S530-A4 | 13935 | 2854 | 13925 | SHP-T | ETR-RS232 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LPS155-C Datasheet file may be downloaded here without warranties.