40-6554-18

40-6554-18 Datasheet

Part	Datasheet
40-6554-18	40-6554-18 (pdf)

PDF Datasheet Preview
Series X55X High-Temperature Universal Zero-Insertion-Force DIP Test Socket • Universal Test Socket accepts devices on to centers • All pin count sockets go into PCB with either or centers • Contacts are normally closed to eliminate dependence on plastic to sustain contact • Socket handle can be configured with closed contacts on when in the UP or DOWN position, and can be mounted on either the right or left side • Sockets can be soldered into PCBs. Socket fits into Aries Test Socket Receptacle on Data Sheet 10003 GENERAL SPECIFICATIONS • SOCKET BODY natural UL 94V-0 glass-filled Polyetheretherketone PEEK • HANDLE Stainless Steel • CONTACTS BeNi 360, 1/2-hard • CONTACT PLATING 50u NiB CUSTOMIZATION In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be • CONTACT CURRENT RATING 1 amp • OPERATING TEMPERATURE -67°F [-55°C] min. 482°F [250°C] max. furnished, depending on the quantity. NOTE Aries reserves the right to change product general specifications without notice. • RETENTION FORCE closed 55g/pin based on a dia. test lead • INSULATION RESISTANCE 1000 mΩ min. • DIELECTRIC WITHSTANDING VOLTAGE 1000 VAC • LIFE CYCLE 25,000 to 50,000 cycles ORDERING INFORMATION XX-X55X-1 8 • ACCEPTS LEADS wide, Pins NiB Plating long 24, 28, 32, 36, Solder Pin Tail MOUNTING CONSIDERATIONS 40, 42, 44, 48 Row-to-Row Spacing btm Handle Options 1 = Left, up is on • See Socket Footprint below 2 = Right, up is on 6 = std 3 = Left, down is on 4 = Right, down is on std NOTE ‘on’ = closed contacts ALL DIMENSIONS INCHES [MILLIMETERS] ALL TOLERANCES UNLESS OTHERWISE SPECIFIED “A” = NO. OF PINS PER ROW x + “B” = NO. OF PINS PER ROW -1 x “C” = NO. OF PINS PER ROW x + DO NOT USE THESE SOCKETS IN A BURN-IN OVEN WITH THE SOCKET CONTACTS IN THE OPEN POSITION, AS IT WILL DAMAGE THE SOCKET. CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS Bristol, PA 19007-6810 USA TEL 215 781-9956 • FAX 215 781-9845 • PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED

PDF Datasheet Preview

Series X55X High-Temperature Universal Zero-Insertion-Force DIP Test Socket
• Universal Test Socket accepts devices on to centers
• All pin count sockets go into PCB with either or centers
• Contacts are normally closed to eliminate dependence on plastic to sustain contact
• Socket handle can be configured with closed contacts on when in the UP or DOWN
position, and can be mounted on either the right or left side
• Sockets can be soldered into PCBs. Socket fits into Aries Test Socket Receptacle on

Data Sheet 10003

GENERAL SPECIFICATIONS
• SOCKET BODY natural UL 94V-0 glass-filled Polyetheretherketone PEEK
• HANDLE Stainless Steel
• CONTACTS BeNi 360, 1/2-hard
• CONTACT PLATING 50u NiB

CUSTOMIZATION In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be
• CONTACT CURRENT RATING 1 amp
• OPERATING TEMPERATURE -67°F [-55°C] min. 482°F [250°C] max.
furnished, depending on the quantity. NOTE Aries reserves the right to change product general specifications without notice.
• RETENTION FORCE closed 55g/pin based on a dia. test lead
• INSULATION RESISTANCE 1000 mΩ min.
• DIELECTRIC WITHSTANDING VOLTAGE 1000 VAC
• LIFE CYCLE 25,000 to 50,000 cycles
ORDERING INFORMATION XX-X55X-1 8
• ACCEPTS LEADS wide, Pins

NiB Plating
long
24, 28, 32, 36,

Solder Pin Tail

MOUNTING CONSIDERATIONS
40, 42, 44, 48 Row-to-Row Spacing btm

Handle Options 1 = Left, up is on
• See Socket Footprint below
2 = Right, up is on
6 = std
3 = Left, down is on
4 = Right, down is on std

NOTE ‘on’ = closed contacts

ALL DIMENSIONS INCHES [MILLIMETERS]

ALL TOLERANCES UNLESS OTHERWISE SPECIFIED
“A” = NO. OF PINS PER ROW x + “B” = NO. OF PINS PER ROW -1 x “C” = NO. OF PINS PER ROW x +

DO NOT USE THESE SOCKETS IN A BURN-IN OVEN WITH THE SOCKET CONTACTS IN THE OPEN POSITION, AS IT WILL DAMAGE THE SOCKET.

CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS

Bristol, PA 19007-6810 USA TEL 215 781-9956
• FAX 215 781-9845
•

PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 40-6554-18 Datasheet file may be downloaded here without warranties.

Datasheet ID: 40-6554-18 518383