C9314-02

C9314-02 Datasheet

Part	Datasheet
C9314-02	C9314-02 (pdf)

PDF Datasheet Preview
Series C84/93 Dual Beam Edge-Grip Socket w/Solder Tails • Anti-wicking design on sockets eliminates flux or solder contamination • Dual beam, edge-grip contacts provide high retention and positive contact • End-to-end and side-to-side stackable GENERAL SPECIFICATIONS • BODY black UL 94V-0 glass-filled Nylon 4/6 • DUAL BEAM CONTACT Phosphor Bronze 521 • CONTACT PLATING overall 50u Ni per SAE AMS-QQN-290 Sn 200u min. matte Sn per ASTM B545-97 Sn/Pb 100-150u min. 90/10 Sn/Pb per MIL-P-81728 Au 10u min. Au per MIL-G-45204 in contact area and 100-150u min. 90/10 Sn/Pb per MIL-P-81728 on Solder Tail CUSTOMIZATION In addition to the standard products shown on this page, Aries specializes in custom design and production. • WAFER Nomex, thick Special materials, platings, sizes, and configurations can be • CONTACT CURRENT RATING 1 amp • CONTACT RESISTANCE 20 mΩ initial furnished, depending on the quantity. NOTE Aries reserves the right to change product general specifications without notice. • INSULATION RESISTANCE 100 mΩ 500VDC per MIL-STD-1344, Method • DIELECTRIC WITHSTANDING VOLTAGE 1000 VAC • OPERATING TEMPERATURE -67°F [-55°C] to [105°C] 221°F for Sn -67°F [-55°C] to 257°F [125°C] for Au ORDERING INFORMATION C XX-XX-TL • ACCEPTS LEADS up to x or dia., long Socket Series Pin Plating Optional Plating Sn/Pb 02 = Nomex Wafer std MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE dia. 93 = Au 84 = Sn No. of Pins see Table ALL DIMENSIONS INCHES [MILLIMETERS] ALL TOLERANCES UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS No. of Pins 6 8 14 16 18 20 24 28 40 Dim “A” Dim. “B” Centers “C” Dim. “D” Dim. “E” Dim. “F” Bristol, PA 19007-6810 USA TEL 215 781-9956 • FAX 215 781-9845 • PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED

PDF Datasheet Preview

Series C84/93 Dual Beam Edge-Grip Socket w/Solder Tails
• Anti-wicking design on sockets eliminates flux or solder contamination
• Dual beam, edge-grip contacts provide high retention and positive contact
• End-to-end and side-to-side stackable

GENERAL SPECIFICATIONS
• BODY black UL 94V-0 glass-filled Nylon 4/6
• DUAL BEAM CONTACT Phosphor Bronze 521
• CONTACT PLATING overall 50u Ni per SAE AMS-QQN-290 Sn 200u
min. matte Sn per ASTM B545-97 Sn/Pb 100-150u min.
90/10 Sn/Pb per MIL-P-81728 Au 10u min. Au per MIL-G-45204 in
contact area and 100-150u min. 90/10 Sn/Pb per MIL-P-81728 on

Solder Tail

CUSTOMIZATION In addition to the standard products shown on this page, Aries specializes in custom design and production.
• WAFER Nomex, thick

Special materials, platings, sizes, and configurations can be
• CONTACT CURRENT RATING 1 amp
• CONTACT RESISTANCE 20 mΩ initial
furnished, depending on the quantity. NOTE Aries reserves the right to change product general specifications without notice.
• INSULATION RESISTANCE 100 mΩ 500VDC per MIL-STD-1344, Method
• DIELECTRIC WITHSTANDING VOLTAGE 1000 VAC
• OPERATING TEMPERATURE -67°F [-55°C] to [105°C] 221°F for

Sn -67°F [-55°C] to 257°F [125°C] for Au
ORDERING INFORMATION C XX-XX-TL
• ACCEPTS LEADS up to x or dia., long

Socket Series Pin Plating

Optional Plating Sn/Pb 02 = Nomex Wafer std

MOUNTING CONSIDERATIONS
• SUGGESTED PCB HOLE SIZE dia.
93 = Au 84 = Sn No. of Pins
see Table

ALL DIMENSIONS INCHES [MILLIMETERS] ALL TOLERANCES UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS

No. of Pins 6 8 14 16 18 20 24 28 40

Dim “A”

Dim. “B”

Centers “C”

Dim. “D”

Dim. “E”

Dim. “F”

Bristol, PA 19007-6810 USA TEL 215 781-9956
• FAX 215 781-9845
•

PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived C9314-02 Datasheet file may be downloaded here without warranties.

Datasheet ID: C9314-02 518382