28-650000-10

28-650000-10 Datasheet

P/N 28-450001-10 32-450001-10 32-650000-10 24-650000-10 28-650000-10

Part	Datasheet
28-650000-10	28-650000-10 (pdf)

PDF Datasheet Preview
Series 450001 and 650000 SOIC and SOJ-to-DIP Adapter • A cost-effective means of upgrading to SOJ or SOIC without changing your PCB layout. • Available on and centers. Consult Data Sheet 18010 for Adapters on centers. GENERAL SPECIFICATIONS • BOARD MATERIAL thick FR-4 or IS410 per IPC 4101A/26 with 1-oz. Cu traces, both sides • PADS finished with HASL • PINS Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M • PIN PLATING Sn/Pb • OPERATING TEMPERATURE 221°F [105°C] MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE dia. CUSTOMIZATION In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE Aries reserves the right to change product general specifications without notice. ORDERING INFORMATION See Table below ALL DIMENSIONS INCHES [MILLIMETERS] ALL TOLERANCES UNLESS OTHERWISE SPECIFIED “A” = NO. OF PINS PER ROW X “D” = NO. OF PINS PER ROW - 1 X AVAILABLE IN PANELIZED FORM WITH OR WITHOUT CUSTOMERSUPPLIED DEVICES MOUNTED. CONSULT FACTORY. CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS P/N 28-450001-10 32-450001-10 32-650000-10 24-650000-10 28-650000-10 Pins Type 28 SOJ 32 SOJ 32 SOJ 24 SOIC 28 SOIC Dim. “B” Centers “C” Dim. “E” Dim. “F” Dim. “G” Dim. “H” Bristol, PA 19007-6810 USA TEL 215 781-9956 • FAX 215 781-9845 • PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED

PDF Datasheet Preview

Series 450001 and 650000 SOIC and SOJ-to-DIP Adapter
• A cost-effective means of upgrading to SOJ or SOIC without changing your PCB layout.
• Available on and centers. Consult Data Sheet 18010 for Adapters on centers.

GENERAL SPECIFICATIONS
• BOARD MATERIAL thick FR-4 or IS410 per IPC 4101A/26 with 1-oz. Cu traces, both sides
• PADS finished with HASL
• PINS Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M
• PIN PLATING Sn/Pb
• OPERATING TEMPERATURE 221°F [105°C]

MOUNTING CONSIDERATIONS
• SUGGESTED PCB HOLE SIZE dia.

CUSTOMIZATION In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE Aries reserves the right to change product general specifications without notice.
ORDERING INFORMATION See Table below

ALL DIMENSIONS INCHES [MILLIMETERS] ALL TOLERANCES UNLESS OTHERWISE SPECIFIED
“A” = NO. OF PINS PER ROW X “D” = NO. OF PINS PER ROW - 1 X AVAILABLE IN PANELIZED FORM WITH OR WITHOUT CUSTOMERSUPPLIED DEVICES MOUNTED. CONSULT FACTORY. CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS

P/N 28-450001-10 32-450001-10 32-650000-10 24-650000-10 28-650000-10

Pins Type 28 SOJ 32 SOJ 32 SOJ 24 SOIC 28 SOIC

Dim. “B”

Centers “C”

Dim. “E”

Dim. “F”

Dim. “G”

Dim. “H”

Bristol, PA 19007-6810 USA TEL 215 781-9956
• FAX 215 781-9845
•

PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 28-650000-10 Datasheet file may be downloaded here without warranties.

Datasheet ID: 28-650000-10 518370