LP150 series
Part | Datasheet |
---|---|
![]() |
LP1505F20V00 (pdf) |
PDF Datasheet Preview |
---|
LP150 series Low profile trackball Distinctive features and specifications ball diameter Panel mount design Available in black or backlit illumination Several protocol options Additional button strips available Environmental Protection Classification IP Rating contact factory MECHANICAL CONFIGURATION OPTIONS • Ball Diameter: 38.10mm • Ball Rotation Continuous in all directions • Tracking Force 10g 0.35oz • Weight 118.5.5g 4.18oz • Life Cycle ball rotations 5 million • Operating Temperature -40ºC to +85ºC -40ºF to +185ºF PROTOCOL OPTIONS AND ELECTRICAL SPECIFICATIONS • USB: Input 4.00V 5.25V 25mA max +30mA for backlit illumination option Output:USB • PS/2/3BTN PS/2 Input 5.00V 25mA max +30mA for backlit illumination option Output CMOS/TTL • LED backlighting Red, Blue, Green or Clear through a translucent Thermostat resin ball • Additional pushbutton switch Two, three or four* buttons * USB only see Button Strips • Connector cables • Conformally coated PCB MOUNTING OPTIONS • 180º horizontal to 90º vertical please specify when ordering. • Microsoft Serial*:Input:DTR/RTS 14 mA max +30mA for backlit illumination option Output RS-232, Serial • Quadrature Input 5.00V 30mA max +30mA for backlit illumination option Output Quadrature Waveforms • Sun Workstation Input 5.00V 30mA max Mouse Systems Serial +30mA for backlit illumination option Output CMOS/TTL NOTE * = Microsoft Serial Interface requires a 5V supply for the LED backlighting option. All values are nominal. SERIES MODEL 150 Diameter 38.1mm PROTOCOL FORMAT 1 Microsoft 2 btn Serial 3 PS/2/3 btn 5 Quadrature 6 SUN Workstations 7 USB MOUNTING POSITION F - Level to 45º N - Level to 90º X - N/A RESOLUTION 10 - 120 resolution 20 - 240 resolution 30 - 480 resolution POWER ILLUMINATION REQUIREMENT V00 5V Regulated R00 RS-232* DTR & RTS R Red B Blue G Green C Clear Black* *Microsoft Protocol only *Non-illuminated Note The company reserves the right to change specifications without notice. APEM LP150 series Low profile trackball MOUNTING CUTOUT DIMENSIONS - Without rubber gasket - With rubber gasket Mounting Hardware Two #4-40x7/8 Phl Flat Screws Two Self Clinching Standoffs BUTTON STRIP FEATURES • Two, three, or four* *USB only buttons • Tactile feedback • Normally open momentary contact switch • 5 million lifecycles rating at 500mA at 12VDC • Black or gray button caps • Choice of convex or concave design #4-40 Screw, Nut & Washer 2 Places Panel #4-40 Screw, Nut & Washer 2 Places Panel White Grey Green Common NOTE All dimensions are in mm/ inch . |
More datasheets: 26101 | M4791 SL001 | M4791 SL002 | M4791 SL005 | AFCT-57V6ANSZ | AFCT-57V6NSZ | CHF9838CNF500L | ACPM-5813-TR1 | ACPM-5813-BLK | ACPM-5813-SG1 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LP1505F20V00 Datasheet file may be downloaded here without warranties.