4246A22UU

4246A22UU Datasheet

4241A-2 4246A-2

Part	Datasheet
4246A22UU	4246A22UU (pdf)

Related Parts	Information
4241A22UU	4241A22UU
4146A22	4146A22

PDF Datasheet Preview
4100 AND 4200 SERIES TOGGLE SWITCHES - INSULATED LEVER AND BUSHING Distinctive features and specifications No external metal parts Knee lever toggle joint quick-break mechanism Butt action contacts UL and CSA approved ELECTRICAL SPECIFICATIONS • Max. current/voltage rating with resistive load 3A 250VAC - 6A 125VAC - 6A 30VDC • Initial contact resistance 10 max. • Insulation resistance min. at 500VDC • Dielectric strength : Vrms 50 Hz min. between terminals and between poles Vrms 50 Hz min. between terminals and frame • Electrical life cycles at 3A 250VAC cycles at 6A 125VAC and 30VDC MATERIALS GENERAL SPECIFICATIONS • Case phenolic resin • Torque 0,95 Nm Ft.lb max. applied to nut • Actuator polyamide 6-6 • Panel thickness 5 mm between 2 nuts • Bushing polyamide 6-6 • Operating temperature -20°C to +55°C • Contacts silver inlay AGENCY APPROVALS Availability consult factory for details of approved models. Marking To order switches marked UL and/or CSA, consult factory. ABOUT THIS SERIES Dimensions first dimensions are in mm while inches are shown as bracketted numbers. Mounting accessories standard hardware supplied with all models 1 hex nut U166 and 1insulating knurled nut U520 in the same colour as the actuator. They are presented in section N. Packaging unit 20 pieces. APEM H-11 2.80x0.50 .11x.019 Keyway 4100 AND 4200 SERIES TOGGLE SWITCHES - INSULATED LEVER AND BUSHING Solder lug or straight PC terminals • 2 maintained positions • Silver inlay contacts standard • Double pole configurations MODEL STRUCTURE Solder lug terminals 4100 2.80x0.50 .11x.019 1.20x0.5 .047x.019 Keyway 4141A-2 4146A-2 Straight PC terminals 4200 4241A-2 4246A-2 ON - OFF ON - ON Keyway ON - OFF ON - ON

PDF Datasheet Preview

4100 AND 4200 SERIES TOGGLE SWITCHES - INSULATED LEVER AND BUSHING

Distinctive features and specifications

No external metal parts Knee lever toggle joint quick-break mechanism Butt action contacts UL and CSA approved

ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load 3A 250VAC - 6A 125VAC - 6A 30VDC
• Initial contact resistance 10 max.
• Insulation resistance min. at 500VDC
• Dielectric strength :

Vrms 50 Hz min. between terminals and between poles Vrms 50 Hz min. between terminals and frame
• Electrical life cycles at 3A 250VAC cycles at 6A 125VAC and 30VDC

MATERIALS

GENERAL SPECIFICATIONS
• Case phenolic resin
• Torque 0,95 Nm Ft.lb max. applied to nut
• Actuator polyamide 6-6
• Panel thickness 5 mm between 2 nuts
• Bushing polyamide 6-6
• Operating temperature -20°C to +55°C
• Contacts silver inlay

AGENCY APPROVALS

Availability consult factory for details of approved models. Marking To order switches marked UL and/or CSA, consult factory.

ABOUT THIS SERIES

Dimensions first dimensions are in mm while inches are shown as bracketted numbers.

Mounting accessories standard hardware supplied with all models 1 hex nut U166 and 1insulating knurled nut U520 in the same colour as the actuator. They are presented in section N.

Packaging unit 20 pieces.

APEM

H-11
2.80x0.50 .11x.019

Keyway
4100 AND 4200 SERIES TOGGLE SWITCHES - INSULATED LEVER AND BUSHING

Solder lug or straight PC terminals
• 2 maintained positions
• Silver inlay contacts standard
• Double pole configurations

MODEL STRUCTURE

Solder lug terminals 4100
2.80x0.50 .11x.019
1.20x0.5 .047x.019

Keyway
4141A-2 4146A-2

Straight PC terminals 4200
4241A-2 4246A-2

ON - OFF

ON - ON

Keyway

ON - OFF

ON - ON

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 4246A22UU Datasheet file may be downloaded here without warranties.

Datasheet ID: 4246A22UU 518085