AP-CF001GR9NS-ETNRA

AP-CF001GR9NS-ETNRA Datasheet


AP-CF128MR9NS-NRA AP-CF256MR9NS-NRA AP-CF512MR9NS-NRA AP-CF001GR9NS-NRA AP-CF002GR9NS-NRA AP-CF004GR9NS-NRA AP-CF008GR9NS-NRA AP-CF016GR9FS-NR AP-CF032GR9FS-NR AP-CF064GR7FS-NR

Part Datasheet
AP-CF001GR9NS-ETNRA AP-CF001GR9NS-ETNRA AP-CF001GR9NS-ETNRA (pdf)
Related Parts Information
AP-CF016GR9FS-ETNR AP-CF016GR9FS-ETNR AP-CF016GR9FS-ETNR
AP-CF016GR9FS-NR AP-CF016GR9FS-NR AP-CF016GR9FS-NR
AP-CF002GR9NS-ETNRA AP-CF002GR9NS-ETNRA AP-CF002GR9NS-ETNRA
AP-CF004GR9NS-NRA AP-CF004GR9NS-NRA AP-CF004GR9NS-NRA
AP-CF004GR9NS-ETNRA AP-CF004GR9NS-ETNRA AP-CF004GR9NS-ETNRA
AP-CF008GR9NS-NRA AP-CF008GR9NS-NRA AP-CF008GR9NS-NRA
AP-CF008GR9NS-ETNRA AP-CF008GR9NS-ETNRA AP-CF008GR9NS-ETNRA
AP-CF001GR9NS-NRA AP-CF001GR9NS-NRA AP-CF001GR9NS-NRA
AP-CF002GR9NS-NRA AP-CF002GR9NS-NRA AP-CF002GR9NS-NRA
PDF Datasheet Preview
Halogen-free

CompactFlash Series 5

Specifications for Industrial CompactFlash Card August 7th, 2013 Version

Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel +886-2-2267-8000 Fax +886-2-2267-2261

Compact Flash 5 series

Features:

PIO Mode 6 Multiword DMA Mode 4 Ultra DMA Mode 5 PCMCIA UDMA Mode 5

Capacities 128, 256, 512 MB
1, 2, 4, 8, 16, 32, 64 GB

Performance Sustained read Up to 55 MB/sec Sustained write Up to 42 MB/sec

Temperature ranges 0°C to 70°C for operation Standard -40°C to 85°C for operation Extended -40°C to 100°C for storage

Operating voltage V

Power consumption typical ** Active mode 175 mA Standby mode 3 mA

Connector Type 50 pins female

Physical Dimensions 36.4mm x 42.8mm x 3.3mm

Intelligent ATA/IDE module Wear-leveling algorithms to substantially
increase longevity of flash media Built-in BCH ECC capable of correcting
up to 24 bits in 1,024 byte data Flash block management Power failure management Supports S.M.A.R.T commands

NAND Flash Type SLC

Endurance TBW Terabytes Written 128 MB TBW 256 MB TBW 512 MB TBW 1 GB TBW 2 GB TBW 4 GB TBW 8 GB TBW 16 GB TBW 32 GB TBW 64 GB TBW

Halogen free
*Performance and power consumption may vary depending on host system configurations.
1 2013 Apacer Technology Inc.

Compact Flash 5 series

Table of Contents

GENERAL DESCRIPTION 3

INTELLIGENT COMPACTFLASH MODULE Wear-leveling algorithms S.M.A.R.T. Technology Built-in Hardware ECC Flash Block Management Power Failure Management

FUNCTIONAL BLOCK 4

PIN ASSIGNMENTS 5

PRODUCT SPECIFICATION 7

PERFORMANCE ENVIRONMENTAL CERTIFICATION & COMPLIANCE ENDURANCE

SOFTWARE INTERFACE 9

CF-ATA COMMAND

ELECTRICAL SPECIFICATION 10

PHYSICAL CHARACTERISTICS 11
PRODUCT ORDERING INFORMATION 12

PRODUCT CODE DESIGNATIONS VALID
2 2013 Apacer Technology Inc.

Compact Flash 5 series

Apacer’s value-added CFC provides complete PCMCIA ATA functionality and compatibility. Apacer ‘s CompactFlash technology is designed for applications in Point of Sale POS terminals, telecom, IP-STB, medical instruments, surveillance systems, industrial PCs and handheld applications such as the new generation of Digital Single Lens Reflex DSLR cameras.

Intelligent CompactFlash Module

Wear-leveling algorithms

Flash memory devices differ from Hard Disk Drives HDDs in terms of how blocks are utilized. For HDDs, when a change is made to stored data, like erase or update, the controller mechanism on HDDs will perform overwrites on blocks. On the other hand, NAND flash storage adopts flash as their primary media. Unlike HDDs, flash blocks cannot be overwritten and each P/E cycle wears down the lifespan of blocks gradually. Repeatedly program/erase cycles performed on the same memory cells will eventually cause some blocks to age faster than others. This would bring flash storages to their end of service term earlier. Wear leveling is an important mechanism that level out the wearing of blocks so that the wearing-down of blocks can be almost evenly distributed. This will increase the lifespan of SSDs. Commonly used wear leveling types are Static and Dynamic.

S.M.A.R.T. Technology

S.M.A.R.T. is an acronym for Self-Monitoring, Analysis and Reporting Technology, an open standard allowing disk drives to automatically monitor their own health and report potential problems. It protects the user from unscheduled downtime by monitoring and storing critical drive performance and calibration parameters. Ideally, this should allow taking proactive actions to prevent impending drive failure. Apacer SMART feature adopts the standard SMART command B0h to read data from the drive. When the Apacer SMART Utility running on the host, it analyzes and reports the disk status to the host before the device is in critical condition.

Built-in Hardware ECC

This CompactFlash card employs BCH Error Correction Code ECC algorithms. This on-chip hardware BCH-ECC engines is 13/24 bit programmed that can correct up to 24-bit errors per 1,024 byte data. This built-in hardware ECC performs parity generation and error detection/correction for data integrity.

Flash Block Management

Contemporary process technology is unable to guarantee total reliability of NAND flash memory array. When a flash memory device leaves factory, it comes with a highly minimal number of initial bad block during production or out-of-factory as there is no currently known technology that produce flash chips free of bad blocks. On the other hand, bad blocks may develop during program/erase cycles. When host performs program/erase command on a block, bad block may appear in Status Register. Since bad blocks are inevitable, the solution is to keep them in control. Apacer flash devices are programmed with ECC, block mapping technique and S.M.A.R.T to reduce invalidity or error. Once bad blocks are detected, data in those blocks will be transferred to free blocks and error will be corrected by designated algorithms.
3 2013 Apacer Technology Inc.

Compact Flash 5 series

Power Failure Management

Power Failure Management plays a crucial role when experiencing unstable power supply. Power disruption may occur when users are storing data into the SSD. In this urgent situation, the controller would run multiple write-to-flash cycles to store the metadata for later block rebuilding. This urgent operation requires about several milliseconds to get it done. At the next power up, the firmware will perform a status tracking to retrieve the mapping table and resume previously programmed NAND blocks to check if there is any incompleteness of transmission

Functional Block

The CompactFlash Card CFC includes a controller and flash media, as well as the CompactFlash standard interface. Figure 2-1 shows the functional block diagram.

Figure 2-1 Functional block diagram
4 2013 Apacer Technology Inc.

Compact Flash 5 series

Pin Assignments

Table 3-1 lists the pin assignments with respective signal names for the 50-pin configuration. A “#” suffix indicates the active low signal. The pin type can be input, output or input/output.

Pin No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

Table 3-1 Pin assignments 1 of 2

Memory card mode

Signal name GND D3 D4 D5 D6 D7 #CE1 A10 #OE A9 A8 A7 VCC A6 A5 A4 A3 A2 A1 A0 D0 D1 D2 WP #CD2 #CD1 D11 D12 D13 D14 D15 #CE2 #VS1 #IORD
#IOWR #WE

RDY/-BSY VCC
#CSEL #VS2 RESET

Pin I/O type I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I O I O I O I

I/O card mode

Signal name GND D3 D4 D5 D6 D7 #CE1 A10 #OE A9 A8 A7 VCC A6 A5 A4 A3 A2 A1 A0 D0 D1 D2
#IOIS16 #CD2 #CD1 D11 D12 D13 D14 D15 #CE2 #VS1 #IORD #IOWR #WE #IREQ VCC #CSEL #VS2 RESET

Pin I/O type -

I/O I/O I/O I/O I/O

I/O I/O I/O I/O I/O I/O I/O I/O I O I O I O I

True IDE mode
Product Ordering Information

Product Code Designations

A P CF x R X S A

Firmware version

Specification

RM Removable NR Non-Removable ET Extended Temperature NDRM Non-DMA + Removable NDNR Non-DMA + Non-Removable ETRM Ext. Temp. + Removable ETNR Ext. Temp. + Non-Removable ETNDRM Ext. Temp + Non-DMA + Removable ETNDNR Ext. Temp + Non-DMA + Non-Removable

Halogen Free Compliant

Configuration F Dual Channel N Standard

CTL Type
7 CTL BGA Package 9 CTL TSOP Package

CFC Type

Capacities:
128M 256M 512M 001G 002G 004G 008G 016G 032G 064G
128MB 256MB 512MB
1GB 2GB 4GB 8GB 16GB 32GB 64GB

Model Name

Apacer Product Code
12 2013 Apacer Technology Inc.

Compact Flash 5 series

Valid Combinations

Standard Temperature Non-Removable

Capacity
128MB 256MB 512MB
1GB 2GB 4GB 8GB 16GB 32GB 64GB

AP/N

AP-CF128MR9NS-NRA AP-CF256MR9NS-NRA AP-CF512MR9NS-NRA AP-CF001GR9NS-NRA AP-CF002GR9NS-NRA AP-CF004GR9NS-NRA AP-CF008GR9NS-NRA AP-CF016GR9FS-NR AP-CF032GR9FS-NR AP-CF064GR7FS-NR

Removable

Capacity
128MB 256MB 512MB
1GB 2GB 4GB 8GB 16GB 32GB 64GB

AP/N

AP-CF128MR9NS-RMA AP-CF256MR9NS-RMA AP-CF512MR9NS-RMA AP-CF001GR9NS-RMA AP-CF002GR9NS-RMA AP-CF004GR9NS-RMA AP-CF008GR9NS-RMA AP-CF016GR9FS-RM AP-CF032GR9FS-RM AP-CF064GR7FS-RM
13 2013 Apacer Technology Inc.

Compact Flash 5 series

Non-DMA + Removable

Capacity
128MB 256MB 512MB
1GB 2GB 4GB 8GB 16GB 32GB 64GB

AP/N

AP-CF128MR9NS-NDRMA AP-CF256MR9NS-NDRMA AP-CF512MR9NS-NDRMA AP-CF001GR9NS-NDRMA AP-CF002GR9NS-NDRMA AP-CF004GR9NS-NDRMA AP-CF008GR9NS-NDRMA AP-CF016GR9FS-NDRM AP-CF032GR9FS-NDRM AP-CF064GR7FS-NDRM

Non-DMA + Non-Removable
Remark
17 2013 Apacer Technology Inc.
More datasheets: 4106-002LF | 4106-002 | 3079 | ACPM-9328-BLK | ACPM-9328-TR1 | 1-NPL/603-1341 | FFPF10U30DNTU | B88069X2890C102 | AP-CF016GR9FS-ETNR | AP-CF016GR9FS-NR


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AP-CF001GR9NS-ETNRA Datasheet file may be downloaded here without warranties.

Datasheet ID: AP-CF001GR9NS-ETNRA 518056