X3C07P1-05S

X3C07P1-05S Datasheet

Model X3C07P1-05S

Part	Datasheet
X3C07P1-05S	X3C07P1-05S (pdf)

PDF Datasheet Preview
Model X3C07P1-05S Prelim 5dB Directional Coupler Description The X3C07P1-05S is a low profile, high performance 5dB directional coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for UMTS applications. The X3C07P1-05S is designed particularly for non-binary split and combine in high power amplifiers, e.g. used along with a 3dB to get a 3-way, plus other signal distribution applications where low insertion loss is required. It can be used in high power applications up to 70 Watts. Features • 600-900 MHz • UMTS • High Power • Very Low Loss • Tight Coupling • High Directivity • Production Friendly • Tape and Reel • Lead Free Parts have been subjected to rigorous qualification testing and they are manufactured using materials with coefficients of thermal expansion CTE compatible with common substrates such as FR4, G-10, RF-35, RO4350 and polyimide. Produced with 6 of 6 RoHS compliant tin immersion finish Electrical Specifications Frequency Mean Coupling Insertion Loss VSWR Phase Balance 600-900 695-805 ± ± dB Max Max 1 Degrees Directivity dB Min 23 25 Frequency Sensitivity Power dB Max ± ± Avg. CW Watts ΘJC ºC/Watt Operating Temp. -55 to +95 -55 to +95 Mechanical Outline Specification based on performance of unit properly installed on Anaren Test Board Refer to Specifications subject to change without notice. Refer to parameter definitions for details. Dimensions are in Inches [Millimeters] X3C07P1-05S Mechanical Outline Available on Tape and Reel for Pick and Place Manufacturing. USA/Canada Toll Free: Europe: 315 432-8909 800 411-6596 +44 2392-232392 Model X3C07P1-05S Prelim Directional Coupler Pin Configuration The X3C07P1-05S has an orientation marker to denote Pin Once port one has been identified the other ports are known automatically. Please see the chart below for clarification: Pin 1 Input Isolated Direct Coupled Packaging and Ordering Information Parts are available in both reel and tube. Packaging follows EIA Parts are oriented in tape and reel as shown below. Minimum order quantities are 2000 per reel and 77 per tube. See Model Numbers below for further ordering information. Dimensions are in Inches[MM] Direction of Part Feed Unloading XXX XX X - XX X Xinger Coupler Frequency MHz Size Inches Power Watts Coupling Value Plating Finish 04 = 410-500 07 = 600-900 09 = 800-1000 19 = 1700-2000 21 = 2000-2300 25 = 2300-2500 26 = 2650-2800 35 = 3300-3800 A = x 1 = 100 B = x 2 = 200 E = x 3 = 300 L = x M= x P = x 03 = 3dB 05 = 5dB 10 = 10dB 20 = 20dB 30 = 30dB P = Tin Lead S = Immersion Tin Example X3C 19 P 1 - 03 S Available on Tape and Reel for Pick and Place Manufacturing. USA/Canada Toll Free: Europe: 315 432-8909 800 411-6596 +44 2392-232392

PDF Datasheet Preview

Model X3C07P1-05S

Prelim
5dB Directional Coupler

Description The X3C07P1-05S is a low profile, high performance 5dB directional coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for UMTS applications. The X3C07P1-05S is designed particularly for non-binary split and combine in high power amplifiers, e.g. used along with a 3dB to get a 3-way, plus other signal distribution applications where low insertion loss is required. It can be used in high power applications up to 70 Watts.

Features
• 600-900 MHz
• UMTS
• High Power
• Very Low Loss
• Tight Coupling
• High Directivity
• Production Friendly
• Tape and Reel
• Lead Free

Parts have been subjected to rigorous qualification testing and they are manufactured using materials with coefficients of thermal expansion CTE compatible with common substrates such as FR4, G-10, RF-35, RO4350 and polyimide. Produced with 6 of 6 RoHS compliant tin immersion finish

Electrical Specifications **

Frequency

Mean Coupling

Insertion Loss

VSWR

Phase Balance
600-900 695-805
± ±
dB Max

Max 1

Degrees

Directivity
dB Min
23 25

Frequency Sensitivity

Power
dB Max
± ±

Avg. CW Watts
ΘJC
ºC/Watt

Operating Temp.
-55 to +95 -55 to +95

Mechanical Outline
**Specification based on performance of unit properly installed on Anaren Test Board Refer to Specifications subject to change without notice. Refer to parameter definitions for details.

Dimensions are in Inches [Millimeters] X3C07P1-05S Mechanical Outline

Available on Tape and Reel for Pick and Place Manufacturing.

USA/Canada Toll Free:

Europe:
315 432-8909 800 411-6596 +44 2392-232392

Model X3C07P1-05S

Prelim

Directional Coupler Pin Configuration

The X3C07P1-05S has an orientation marker to denote Pin Once port one has been identified the other ports are known automatically. Please see the chart below for clarification:

Pin 1 Input Isolated Direct Coupled
Packaging and Ordering Information
Parts are available in both reel and tube. Packaging follows EIA Parts are oriented in tape and reel as shown below. Minimum order quantities are 2000 per reel and 77 per tube. See Model Numbers below for further ordering information.

Dimensions are in Inches[MM]

Direction of Part Feed Unloading

XXX XX X - XX X

Xinger Coupler Frequency MHz Size Inches Power Watts Coupling Value Plating Finish
04 = 410-500 07 = 600-900 09 = 800-1000 19 = 1700-2000 21 = 2000-2300 25 = 2300-2500 26 = 2650-2800 35 = 3300-3800

A = x 1 = 100 B = x 2 = 200 E = x 3 = 300 L = x M= x P = x
03 = 3dB 05 = 5dB 10 = 10dB 20 = 20dB 30 = 30dB

P = Tin Lead S = Immersion Tin

Example X3C 19 P 1 - 03 S

Available on Tape and Reel for Pick and Place Manufacturing.

USA/Canada Toll Free:

Europe:
315 432-8909 800 411-6596 +44 2392-232392

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived X3C07P1-05S Datasheet file may be downloaded here without warranties.

Datasheet ID: X3C07P1-05S 518026