J100N50X4

J100N50X4 Datasheet


Model J100N50X4

Part Datasheet
J100N50X4 J100N50X4 J100N50X4 (pdf)
PDF Datasheet Preview
Features
• RoHS Compliant
• 100 Watts
• DC GHz
• AlN Ceramic
• Non-Nichrome Resistive Element
• Low VSWR
• 100% Tested

Outline Drawing

Model J100N50X4

Half Flange Termination 100 Watts, 50Ω

The J100N50X4 is high performance Aluminum Nitride AlN half flange termination intended as a cost competitive alternative to Beryllium Oxide BeO . The termination is well suited to all cellular frequency bands such as AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating circulators, and for use in power combiners. The termination is also RoHS compliant!

General Specifications

Resistive Element

Thick Film

Substrate

AlN Ceramic

Cover Mounting Flange Leads

Alumina Ceramic Copper, nickel plated per QC-N-290 99% pure silver thick

Cover

Alumina Ceramic

Tolerance is unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches.

Electrical Specifications

Resistance Value:
50 Ohms, ± 2%

Power:
100 Watts

Frequency Range:

DC 3.0GHz

V.S.W.R.

Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Storage temperature is -20°C to 85 ºC Operating temperature is -55ºC to 125ºC see chart for derating temperatures . Specifications subject to change with out notice.

Note All dimensions in inches 1inch = 2.54cm. Lead Length 0.150in min.

USA/Canada Toll Free:
315 432-8909 800 544-2414

Europe:
+44 2392-232392

Model J100N50X4

Typical Performance:

Power De-rating:

Mounting Footprint and Procedure:

USA/Canada Toll Free Europe:
315 432-8909
More datasheets: 5580601003 | 5580701007 | 89422712 | 1985 | AT93C46C-10SI-2.7 | AT93C46C-10PI-2.7 | AT93C46C-10SI-2.5 | CS-1050-R | CS-1100-R | CS-1200-R


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived J100N50X4 Datasheet file may be downloaded here without warranties.

Datasheet ID: J100N50X4 518018