A100N50X4A

A100N50X4A Datasheet

Model A100N50X4A

Part	Datasheet
A100N50X4A	A100N50X4A (pdf)

PDF Datasheet Preview
Features • RoHS Compliant • 100 Watts • DC GHz • AlN Ceramic • Non-Nichrome Resistive Element • Low VSWR • 100% Tested • Small Size Outline Drawing Model A100N50X4A Chip Termination 100 Watts, 50Ω The A100N50X4A is high performance Aluminum Nitride AlN chip termination intended as an alternative to Beryllium Oxide BeO . The termination is well suited to all cellular frequency bands such as AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating circulators and for use in power combiners. The termination is also RoHS compliant! General Specifications Resistive Element Thick film Substrate AlN Ceramic Terminal Finish Matte Tin over Nickel Barrier Operating Temperature -55 to +150C see de rating chart Tolerance is unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications Resistance Value: 50 Ohms,  2% Power: 100 Watts Frequency Range: DC GHz V.S.W.R.: 1 DC GHz 1 DC GHz Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change All dimensions are in inches. mm Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada Toll Free: Europe: 315 432-8909 800 544-2414 +44 2392-232392 Model A100N50X4A Typical Performance: Power De-rating: Tape & Reel Available: Mounting Footprint and Procedure: USA/Canada Toll Free Europe: 315 432-8909 800 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing.

PDF Datasheet Preview

Features
• RoHS Compliant
• 100 Watts
• DC GHz
• AlN Ceramic
• Non-Nichrome Resistive Element
• Low VSWR
• 100% Tested
• Small Size

Outline Drawing

Model A100N50X4A

Chip Termination 100 Watts, 50Ω

The A100N50X4A is high performance Aluminum Nitride AlN chip termination intended as an alternative to Beryllium Oxide BeO . The termination is well suited to all cellular frequency bands such as AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating circulators and for use in power combiners. The termination is also RoHS compliant!

General Specifications

Resistive Element

Thick film

Substrate

AlN Ceramic

Terminal Finish

Matte Tin over Nickel Barrier

Operating Temperature -55 to +150C see de rating chart

Tolerance is unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches.

Electrical Specifications

Resistance Value:
50 Ohms,  2%

Power:
100 Watts

Frequency Range:

DC GHz

V.S.W.R.:
1 DC GHz 1 DC GHz

Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change

All dimensions are in inches. mm

Available on Tape and Reel For Pick and Place Manufacturing.

USA/Canada Toll Free:

Europe:
315 432-8909 800 544-2414 +44 2392-232392

Model A100N50X4A

Typical Performance:

Power De-rating:

Tape & Reel Available:

Mounting Footprint and Procedure:

USA/Canada Toll Free Europe:
315 432-8909 800 544-2414 +44 2392-232392

Available on Tape and Reel For Pick and Place

Manufacturing.

More datasheets: B32669C3805J | B32669C3405K | B32669B6105J | 74F374MSAX | 74F374MSA | 74F374SJX | 74F374SJ | 74F374SC | 74F374PC | 74F374SCX

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived A100N50X4A Datasheet file may be downloaded here without warranties.

Datasheet ID: A100N50X4A 518007