HMC272AMS8

HMC272AMS8 Datasheet

HMC272AMS8 / 272AMS8E

Part	Datasheet
HMC272AMS8	HMC272AMS8 (pdf)

Related Parts	Information
HMC272AMS8TR	HMC272AMS8TR

PDF Datasheet Preview
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED THIS PAGE INTENTIONALLY LEFT BLANK MIXERS - SINGLE & DOUBLE BALANCED - SMT HMC272AMS8 / 272AMS8E v00.0511 GaAs MMIC SMT SINGLE BALANCED MIXER, - GHz The HMC272AMS8 / HMC272AMS8E is ideal for • Up or Down Converter for PCS • W-CDMA • GHz ISM • MMDS RoHS Compliant Product Ultra Small Package MSOP8 LO / RF Isolation 32 dB Input IP3 +20 dBm Functional Diagram The HMC272AMS8 & HMC272AMS8E are general purpose ultra miniature single balanced mixers in 8 lead plastic surface mount Mini Small Outline Packages MSOP . This passive MMIC mixer is constructed of GaAs Schottky diodes and a novel planar transformer balun on the chip. The RF port is balanced via the MMIC balun while the LO port is connected directly to the diodes. The consistent MMIC performance will improve system operation and assure regulatory compliance. Electrical Specifications, TA = +25° C, As a Function of IF Frequency Parameter Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure SSB LO to RF Isolation LO to IF Isolation IP3 Input 1 dB Compression Input LO = +10 dBm IF = 100 MHz Min. Typ. Max. LO = +10 dBm IF = 400 MHz Min. Typ. Max. Units GHz dB dBm 10 - 1 For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or v00.0511 Conversion Gain vs. Temperature LO = +10 dBm CONVERSION GAIN dB IF = 400 MHz +25 C +85 C -40 C FREQUENCY GHz HMC272AMS8 / 272AMS8E GaAs MMIC SMT SINGLE BALANCED MIXER, - GHz Isolation LO = +10 dBm ISOLATION dB FREQUENCY GHz RF/IF LO/IF LO/RF MIXERS - SINGLE & DOUBLE BALANCED - SMT Conversion Gain vs. LO Drive [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or 10 - 6

PDF Datasheet Preview

Analog Devices Welcomes Hittite Microwave Corporation

NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

THIS PAGE INTENTIONALLY LEFT BLANK

MIXERS - SINGLE & DOUBLE BALANCED - SMT

HMC272AMS8 / 272AMS8E
v00.0511

GaAs MMIC SMT SINGLE BALANCED MIXER, - GHz

The HMC272AMS8 / HMC272AMS8E is ideal for
• Up or Down Converter for PCS
• W-CDMA
• GHz ISM
• MMDS

RoHS Compliant Product Ultra Small Package MSOP8 LO / RF Isolation 32 dB Input IP3 +20 dBm

Functional Diagram

The HMC272AMS8 & HMC272AMS8E are general purpose ultra miniature single balanced mixers in 8 lead plastic surface mount Mini Small Outline Packages MSOP . This passive MMIC mixer is constructed of GaAs Schottky diodes and a novel planar transformer balun on the chip. The RF port is balanced via the MMIC balun while the LO port is connected directly to the diodes. The consistent MMIC performance will improve system operation and assure regulatory compliance.

Electrical Specifications, TA = +25° C, As a Function of IF Frequency

Parameter

Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure SSB LO to RF Isolation LO to IF Isolation IP3 Input 1 dB Compression Input

LO = +10 dBm IF = 100 MHz

Min.

Typ.

Max.

LO = +10 dBm IF = 400 MHz

Min.

Typ.

Max.

Units

GHz dB dBm
10 - 1

For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or
v00.0511

Conversion Gain vs. Temperature LO = +10 dBm

CONVERSION GAIN dB

IF = 400 MHz
+25 C
+85 C -40 C

FREQUENCY GHz

HMC272AMS8 / 272AMS8E

GaAs MMIC SMT SINGLE BALANCED MIXER, - GHz

Isolation LO = +10 dBm

ISOLATION dB

FREQUENCY GHz

RF/IF LO/IF LO/RF

MIXERS - SINGLE & DOUBLE BALANCED - SMT

Conversion Gain vs. LO Drive
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material Rogers 4350

The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top
and bottom ground planes. The evaluation
circuit board shown is available from Hittite upon
request.

For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or
10 - 6

More datasheets: M85049/24-24W | M85049/24-43W | M85049/24-62W | M85049/24-17W | M85049/24-9W | M85049/24-21W | M85049/24-10W | M85049/24-9S | CT150-4-ILZ1 | HMC272AMS8TR

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HMC272AMS8 Datasheet file may be downloaded here without warranties.

Datasheet ID: HMC272AMS8 636247