131046-HMC928LP5E

131046-HMC928LP5E Datasheet


List of Materials for Evaluation PCB 131046 [1]

Part Datasheet
131046-HMC928LP5E 131046-HMC928LP5E 131046-HMC928LP5E (pdf)
Related Parts Information
HMC928LP5ETR HMC928LP5ETR HMC928LP5ETR
HMC928LP5E HMC928LP5E HMC928LP5E
PDF Datasheet Preview
Analog Devices Welcomes Hittite Microwave Corporation

NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

THIS PAGE INTENTIONALLY LEFT BLANK
v03.1211

The HMC928LP5E is ideal for
• EW Receivers
• Military Radar
• Test Equipment
• Satellite Communications
• Beamforming Modules

Functional Diagram

HMC928LP5E
450° Analog Phase Shifter, 2 - 4 GHz

Octave Bandwidth 2 - 4 GHz 450° Phase Shift Low Insertion Loss dB Low Phase Error ±5 Typical Single Positive Voltage Control 32 Lead 5x5 mm SMT Package 25

The HMC928LP5E is an Analog Phase Shifter which is controlled via an analog control voltage from 0 to +13V. The HMC928LP5E provides a continuously variable phase shift of 0 to 450 degrees from 2 to 4 GHz, with extremely consistent low insertion loss versus phase shift and frequency. The high accuracy HMC928LP5E is monotonic with respect to control voltage and features a typical low phase error of ±5 degrees over an octave bandwidth. The HMC928LP5E is housed in an RoHS compliant 5x5 mm QFN leadless package.

Phase Shifters - ANALOG - SMT

Electrical Specifications, TA = +25° C, 50 Ohm System

Parameter Phase Shift Range Insertion Loss Return Loss Input & Output Control Voltage Range

Frequency GHz

Min.

Typ.

Max.

Units
2 - 4 GHz
2 - 4 GHz
2 - 4 GHz
2 - 4 GHz

Control Current Range
2 - 4 GHz

Maximum Input Power for Linear Operation Phase Voltage Sensitivity Phase Error * Phase Error average Modulation Bandwidth Insertion Phase Temperature Sensitivity * Up to a phase shift range of 400 degrees.
2 - 4 GHz 2 - 4 GHz 2 - 4 GHz 2 - 4 GHz 2 - 4 GHz 2 - 4 GHz
deg/V
deg/°C
13 - 1

For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or
v03.1211

HMC928LP5E
450° Analog Phase Shifter, 2 - 4 GHz

Insertion Loss vs. Frequency

INSERTION LOSS dB
0.5V

FREQUENCY GHz

NORMALIZED PHASE SHIFT degrees

Phase Shift vs. Vctl
2 GHz
3 GHz
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material Rogers 4350

The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request.

For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or
13 - 6
More datasheets: FQP11N40 | ELS-4005SURWA/S530-A3 | F4810 | ROB0003 | RBC1694A | RBC1505A | RBC1855A | B88069X2040S102 | HMC928LP5ETR | HMC928LP5E


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 131046-HMC928LP5E Datasheet file may be downloaded here without warranties.

Datasheet ID: 131046-HMC928LP5E 517975