108347-HMC637LP5
108347-HMC637LP5 Datasheet
List of Materials for Evaluation PCB 108347 [1]
| Part | Datasheet |
|---|---|
108347-HMC637LP5 |
108347-HMC637LP5 (pdf) |
| Related Parts | Information |
|---|---|
HMC637LP5E |
HMC637LP5E |
| PDF Datasheet Preview |
|---|
| Amplifiers - SMT The HMC637LP5 E wideband PA is ideal for • Telecom Infrastructure • Microwave Radio & VSAT • Military & Space • Test Instrumentation • Fiber Optics Functional Diagram HMC637LP5/637LP5E v03.1213 GaAs MESFET MMIC 1 WATT Power Amplifier, DC - 6 GHz P1dB Output Power +29 dBm Gain 13 dB Output IP3 +40 dBm 50 Ohm Matched Input/Output 32 Lead 5x5mm Lead SMT Package 25mm2 The HMC637LP5 E is a GaAs MMIC MESFET Distributed Power Amplifier which operates between DC and 6 GHz. The amplifier provides 13 dB of gain, +40 dBm output IP3 and +29 dBm of output power at 1 dB gain compression while requiring 400 mA from a +12V supply. Gain flatness is excellent at dB from DC - 6 GHz making the HMC637LP5 E ideal for EW, ECM, Radar and test equipment applications. The HMC637LP5 E amplifier I/Os are internally matched to 50 Ohms and the 5x5 mm QFN package is compatible with high volume SMT assembly equipment. Electrical Specifications, TA = +25° C, Vdd= +12V, Vgg2= +5V, Idd= 400 mA* Parameter Min. Frequency Range Gain Gain Flatness Gain Variation Over Temperature Input Return Loss Output Return Loss Output Power for 1 dB Compression P1dB Saturated Output Power Psat Output Third Order Intercept IP3 Noise Figure Supply Current Idd * Adjust Vgg1 between -2 to 0V to achieve Idd= 400 mA typical. Typ. DC - 6 12 15 29 40 5 400 Max. 480 Units GHz dB/ °C dB dBm dB mA For price, delivery and to place orders Analog Devices, Inc., 2 Elizabeth Drive, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or Amplifiers - SMT Gain & Return Loss RESPONSE dB S21 S11 FREQUENCY GHz Input Return Loss vs. Temperature +25C +85C -40C RETURN LOSS dB FREQUENCY GHz ISOLATION dB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and package bottom should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders Analog Devices, Inc., 2 Elizabeth Drive, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or |
| More datasheets: PM54-390L | PM54-151K | PM54-270M | PM54-220M | PM54-180M | PM54-150M | PM54-120M | PM54-100M | PM54-470L | HMC637LP5E |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 108347-HMC637LP5 Datasheet file may be downloaded here without warranties.