HMC393MS8GE
HMC393MS8GE Datasheet
HMC393MS8G / 393MS8GE
| Part | Datasheet |
|---|---|
HMC393MS8GE |
HMC393MS8GE (pdf) |
| PDF Datasheet Preview |
|---|
| HMC393MS8G / 393MS8GE v04.0607 GaAs MMIC DPDT DIVERSITY SWITCH, 5 - 6 GHz This switch is ideal for use as a DPDT Diversity Switch for - GHz applications • HiperLAN • UNII Low Insertion Loss dB GHz High IP3 49 dBm Positive Control 0/+5V Ultra Small MSOP8G Package mm2 Functional Diagram The HMC393MS8G & HMC393MS8GE are low cost C-band DPDT switches that operate between 5 and 6 GHz. This switch can operate as an integrated antenna diversity and transmit/receive switch for the HyperLAN and UNII radio platforms. The design provides 20 dB of isolation between antennas and between Tx and Rx ports. The switch features dB insertion loss and high power handling capability. Switch state is controlled using four CMOS level control voltage lines. SWITCHES - SMT Electrical Specifications, TA = +25° C, Vctl = 0/+5 Vdc, 50 Ohm System Parameter Frequency Min. Typ. Insertion Loss - GHz Isolation - GHz Return Loss On State, Any Port - GHz Input Power for dB Compression - GHz Input Third Order Intercept Two-Tone Input Power = +22 dBm Each Tone - GHz Switching Characteristics - GHz tRISE / tFALL 10/90% RF tON / tOFF 50% CTL to 10/90% RF Max. Units dB dBm 10 - 250 For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at v04.0607 HMC393MS8G / 393MS8GE GaAs MMIC DPDT DIVERSITY SWITCH, 5 - 6 GHz Insertion Loss INSERTION LOSS dB ANT1-Tx State 1 ANT1-Rx State 2 ANT2-Tx State 3 ANT2-Rx State 4 FREQUENCY GHz Isolation, Tx & Rx State 1 State 2 [1] Reference this number when ordering complete evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown above. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown above is available from Hittite upon request. [2] Circuit Board Material Rogers 4350 10 - 254 For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at v04.0607 HMC393MS8G / 393MS8GE GaAs MMIC DPDT DIVERSITY SWITCH, 5 - 6 GHz SWITCHES - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at 10 - 255 |
| More datasheets: ASMT-QWBE-NFHCE | ASMT-QWBE-NFHDE | DMN4015LK3-13 | 87536-004LF | 87536-001LF | AS3518-ECTS | AS3518-T | AS3518-ECTP | AS3518 | 19028989A |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HMC393MS8GE Datasheet file may be downloaded here without warranties.