AS3518-ECTS

AS3518-ECTS Datasheet

AS3518 V10 Preliminary Product Brief, Confidential

Part	Datasheet
AS3518-ECTS	AS3518-ECTS (pdf)

Related Parts	Information
AS3518-T	AS3518-T
AS3518-ECTP	AS3518-ECTP
AS3518	AS3518

PDF Datasheet Preview
AS3518 V10 Preliminary Product Brief, Confidential austriamicrosystems AS3518 Preliminary Product Brief, Confidential Stereo Audio Codec with enhanced System Power Management 1 General Description The AS3518 is a low power stereo audio codec and is designed for Portable Digital Audio Applications. It allows playback and recording in CD quality. It has a variety of audio inputs and outputs to directly connect electret microphones, 16Ω/32Ω headsets and auxiliary signal sources via a 10channel mixer. It consumes less than 20mW in playback mode. Further the device offers advanced power management functions. All necessary ICs and peripherals in a Digital Audio Player are supplied by the AS3518. The different regulated supply voltages are programmable via the serial control interface. AS3518 also contains a Li-Io battery charger. The single supply voltage may vary from 1.0V to 5.5V. The AS3518 has an on-chip, phase locked loop PLL which generates the needed internal CODEC master clock. I2S Frame and shift-clock has to be applied from the processor for playback and recording. Further the AS3518 has an independent 32kHz real time clock RTC on chip which allows a complete power down of the system CPU. 2 Key Features • Multi-bit Sigma Delta Converters DAC 18bit with 94dB SNR ‘A’ weighted ADC 20bit with 90dB SNR ‘A’ weighted Sampling Frequency 8-48kHz • 1 Microphone Input 3 gain pre-setting 28dB/34dB/40dB and AGC 32 gain steps and MUTE supply for electret microphone detection remote control by switch • 3 Line Inputs volume control via serial interface 32 steps and MUTE stereo or 2x mono or mono differential • Audio Mixer 8 channel input/output mixer with AGC mixes line inputs and microphones with DAC left and right channels independent • Line Output volume control via serial interface 32 steps and MUTE 1Vp Stereo 2*5mW Mono differential 10mW earpiece • High Efficiency Headphone Amplifier volume control via serial interface 32 steps and MUTE 2x60mW driver capability headphone and over-current detection phantom ground eliminates large capacitors • Power Management step down for CPU core 0.65V-3.4V, 250mA step down for peripheral 0.65V-3.4V, 250mA up for backlight 15V 25V , 38mA , dimming, voltage control mode LDO for AFE analog supply 2.9V, 200mA LDO for AFE digital supply 2.9V, 200mA LDO for peripherals 1.2V-3.5V, 200mA LDO for peripherals e.g. USB 1.2V-3.5V, 200mA power supply supervision hibernation modes 5sec and 10sec emergency shut-down • Battery Charger automatic trickle charge 50mA prog. constant current charging 50-460mA prog. constant voltage charging 3.9V-4.25V current limitation for USB mode • Real Time Clock ultra low power 32kHz oscillator 32bit RTC sec counter, 96 days auto wake-up selectable alarm seconds or minutes 128bit free SRAM for random settings 32kHz clock output to peripheral voltage generation <1uA total power consumption • General Purpose ADC 10bit resolution 21 inputs analog multiplexer • Interfaces digital audio interface and SPDIF 2 wire serial control interface reset pin, watchdog, power good pin PWM output 64bit unique ID OTP 23 different interrupts • Package CTBGA64 [7.0x7.0x1.1mm] 0.8mm pitch 3 Application Portable Digital Audio Player and Recorder PDA, Smartphone 2003-2006, austriamicrosystems AG, 8141 Unterpremstaetten, Austria-Europe. All Rights Reserved. AS3518 V10 Preliminary Product Brief, Confidential 4 Block Diagram Figure 1 AS3518 Block Diagram austriamicrosystems 2003-2006, austriamicrosystems AG, 8141 Unterpremstaetten, Austria-Europe. All Rights Reserved. AS3518 V10 Preliminary Product Brief, Confidential austriamicrosystems 5 Copyright Copyright 2006, austriamicrosystems AG, Schloss Premstaetten, 8141 Unterpremstaetten, Austria-Europe. Trademarks Registered All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. All products and companies mentioned are trademarks of their respective companies. 6 Disclaimer Devices sold by austriamicrosystems AG are covered by the warranty and patent identification provisions appearing in its Term of Sale. austriamicrosystems AG makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. austriamicrosystems AG reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with austriamicrosystems AG for current information. This product is intended for use in normal commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical lifesupport or life-sustaining equipment are specifically not recommended without additional processing by austriamicrosystems AG for each application. The information furnished here by austriamicrosystems AG is believed to be correct and accurate. However, austriamicrosystems AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of austriamicrosystems AG rendering of technical or other services. 7 Contact Information Headquarters: austriamicrosystems AG Business Unit Communications A 8141 Schloss Premstätten, Austria T. +43 0 3136 500 0 F. +43 0 3136 5692

PDF Datasheet Preview

AS3518 V10 Preliminary Product Brief, Confidential
austriamicrosystems

AS3518

Preliminary Product Brief, Confidential

Stereo Audio Codec with enhanced System Power Management
1 General Description

The AS3518 is a low power stereo audio codec and is designed for Portable Digital Audio Applications. It allows playback and recording in CD quality. It has a variety of audio inputs and outputs to directly connect electret microphones, 16Ω/32Ω headsets and auxiliary signal sources via a 10channel mixer. It consumes less than 20mW in playback mode.

Further the device offers advanced power management functions. All necessary ICs and peripherals in a Digital Audio Player are supplied by the AS3518. The different regulated supply voltages are programmable via the serial control interface. AS3518 also contains a Li-Io battery charger. The single supply voltage may vary from 1.0V to 5.5V.

The AS3518 has an on-chip, phase locked loop PLL which generates the needed internal CODEC master clock. I2S Frame and shift-clock has to be applied from the processor for playback and recording. Further the AS3518 has an independent 32kHz real time clock RTC on chip which allows a complete power down of the system CPU.
2 Key Features
• Multi-bit Sigma Delta Converters DAC 18bit with 94dB SNR ‘A’ weighted ADC 20bit with 90dB SNR ‘A’ weighted Sampling Frequency 8-48kHz
• 1 Microphone Input 3 gain pre-setting 28dB/34dB/40dB and AGC 32 gain steps and MUTE supply for electret microphone detection remote control by switch
• 3 Line Inputs volume control via serial interface 32 steps and MUTE stereo or 2x mono or mono differential
• Audio Mixer 8 channel input/output mixer with AGC mixes line inputs and microphones with DAC left and right channels independent
• Line Output volume control via serial interface 32 steps and MUTE 1Vp Stereo 2*5mW Mono differential 10mW earpiece
• High Efficiency Headphone Amplifier volume control via serial interface 32 steps and MUTE 2x60mW driver capability headphone and over-current detection phantom ground eliminates large capacitors
• Power Management step down for CPU core 0.65V-3.4V, 250mA step down for peripheral 0.65V-3.4V, 250mA up for backlight 15V 25V , 38mA , dimming, voltage control mode LDO for AFE analog supply 2.9V, 200mA LDO for AFE digital supply 2.9V, 200mA LDO for peripherals 1.2V-3.5V, 200mA LDO for peripherals e.g. USB 1.2V-3.5V, 200mA power supply supervision hibernation modes 5sec and 10sec emergency shut-down
• Battery Charger automatic trickle charge 50mA prog. constant current charging 50-460mA prog. constant voltage charging 3.9V-4.25V current limitation for USB mode
• Real Time Clock ultra low power 32kHz oscillator 32bit RTC sec counter, 96 days auto wake-up selectable alarm seconds or minutes 128bit free SRAM for random settings 32kHz clock output to peripheral voltage generation <1uA total power consumption
• General Purpose ADC 10bit resolution 21 inputs analog multiplexer
• Interfaces digital audio interface and SPDIF 2 wire serial control interface reset pin, watchdog, power good pin PWM output 64bit unique ID OTP 23 different interrupts
• Package CTBGA64 [7.0x7.0x1.1mm] 0.8mm pitch
3 Application

Portable Digital Audio Player and Recorder PDA, Smartphone
2003-2006, austriamicrosystems AG, 8141 Unterpremstaetten, Austria-Europe. All Rights Reserved.

AS3518 V10 Preliminary Product Brief, Confidential
4 Block Diagram

Figure 1 AS3518 Block Diagram
austriamicrosystems
2003-2006, austriamicrosystems AG, 8141 Unterpremstaetten, Austria-Europe. All Rights Reserved.

AS3518 V10 Preliminary Product Brief, Confidential
austriamicrosystems
5 Copyright

Copyright 2006, austriamicrosystems AG, Schloss Premstaetten, 8141 Unterpremstaetten, Austria-Europe. Trademarks Registered All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

All products and companies mentioned are trademarks of their respective companies.
6 Disclaimer

Devices sold by austriamicrosystems AG are covered by the warranty and patent identification provisions appearing in its Term of Sale. austriamicrosystems AG makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. austriamicrosystems AG reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with austriamicrosystems AG for current information. This product is intended for use in normal commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical lifesupport or life-sustaining equipment are specifically not recommended without additional processing by austriamicrosystems AG for each application.

The information furnished here by austriamicrosystems AG is believed to be correct and accurate. However, austriamicrosystems AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of austriamicrosystems AG rendering of technical or other services.
7 Contact Information

Headquarters:
austriamicrosystems AG Business Unit Communications A 8141 Schloss Premstätten, Austria T. +43 0 3136 500 0 F. +43 0 3136 5692

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AS3518-ECTS Datasheet file may be downloaded here without warranties.

Datasheet ID: AS3518-ECTS 519682