ASMT-QWBE-NFH0E

ASMT-QWBE-NFH0E Datasheet


ASMT-QWBE-Nxxxx Super 0.5W Cool White Power PLCC-4 Surface Mount LED Indicator

Part Datasheet
ASMT-QWBE-NFH0E ASMT-QWBE-NFH0E ASMT-QWBE-NFH0E (pdf)
Related Parts Information
ASMT-QWBE-NFHCE ASMT-QWBE-NFHCE ASMT-QWBE-NFHCE
ASMT-QWBE-NFHDE ASMT-QWBE-NFHDE ASMT-QWBE-NFHDE
PDF Datasheet Preview
ASMT-QWBE-Nxxxx Super 0.5W Cool White Power PLCC-4 Surface Mount LED Indicator

Data Sheet

The Super 0.5W Cool White Power PLCC-4 SMT LED is Cool white mid-Power PLCC-4 SMT LEDs using InGaN chip technology. The package can be driven at high current due to its superior package design. The product is able to dissipate the heat more compared to the Power PLCC-4 SMT LEDs. These LEDs produce higher light output with better performance compared to the Power PLCC-4 SMT LED.

The Super 0.5W Cool White Power PLCC-4 SMT LEDs are designed for higher reliability, better performance, and operate under a wide range of environmental conditions. The performance characteristics of these new mid-power LEDs make them uniquely suitable for use in harsh conditions such as in automotive applications, and in electronics signs and signals.

To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel is shipped in single intensity and sub color bin, to provide close uniformity.
x Industry Standard PLCC 4 platform 3.2x2.8x1.9mm x High reliability package with enhanced silicone resin
encapsulation x High brightness with optimum performance
using InGaN chip technologies x Available in Cool White x Available in 8mm carrier tape & 7 inch reel x Low Thermal Resistance 40°C/W x Super wide viewing angle at 120 degree x JEDEC MSL 2a

Interior automotive a. Instrument panel backlighting b. Central console backlighting c. Navigation and audio system backlighting d. Dome/Map lighting e. Push button backlighting f. Puddle lamp. g. Glove compartment illumination

Exterior automotive a. Number plate illumination

Electronic signs and signals a. Decorative lighting

Office automation, home appliances, industrial equipment a. Panel/button backlighting b. Display backlighting

CAUTION ASMT-QWBE-Nxxxx LEDs are ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Application Note AN-1142 for additional details.

Package Drawing
± ±

CATHODE MARKING

Notes All dimensions in millimeters Lead polarity as shown in Terminal Ag plating. Encapsulation material silicone resin.

Figure Package Drawing

Table Device Selection Guide TJ = 25 °C

Color

Min. Flux lm

Luminous Flux, V[1] lm Typ. Flux lm Max. Flux lm

Test Current mA Dice Technology

Cool White ASMT-QWBE-NFH0E

InGaN

Notes V is the total luminous output as measured with an integrating sphere at mono pulse conditions. Tolerance = ±12%

Part Numbering System

A S M T - Q X1B E N X 2 X 3 X 4 X 5

Packaging Option Colour Bin Selection Max. Flux Bin Selection Min. Flux Bin Selection Color

W - Cool White

Table Absolute Maximum Ratings TA = 25 °C

Parameters DC Forward Current [1] Peak Forward Current [2] Power Dissipation

ASMT-QWBE-Nxxxx 150 mA 300 mA 513 mW

Junction Temperature
125 °C

Operating Temperature
-40 °C to +110 °C

Storage Temperature

Notes Derate Linearly as shown in Figure Duty Factor = 10%, Frequency = 1kHz
-40 °C to +110 °C

Table Optical Characteristics TJ = 25 °C
More datasheets: TPA311GLFS | TPA413GLFG | TPA313GLFG | TPA511GLFS | TPA411G LFS | TPA513GLFG | EA510US | ACT510US-T | 8506VW-691 | FMG1G50US60H


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ASMT-QWBE-NFH0E Datasheet file may be downloaded here without warranties.

Datasheet ID: ASMT-QWBE-NFH0E 520153