EVAL-AD7124-8SDZ
EVAL-AD7124-8SDZ Datasheet
Evaluation Board User Guide
| Part | Datasheet |
|---|---|
EVAL-AD7124-8SDZ |
EVAL-AD7124-8SDZ (pdf) |
| PDF Datasheet Preview |
|---|
| Evaluation Board User Guide UG-XXX One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel • Fax • Evaluation Board for the 8-Channel, Low Noise, Low Power, 24-bit S-D ADC with In- Amp and Reference Full featured evaluation board for the AD7124-8 PC control in conjunction with the system demonstration platform EVAL-SDP-CB1Z PC software for control and data analysis time domain Standalone capability ONLINE RESOURCES Evaluation Kit Contents EVAL-AD7124-8SDZ evaluation board Evaluation software CD for the AD7124-8 Documents Needed AD7124-8 data sheet AD7124-8 user guide Required Software EVAL-AD7124-8SDZ evaluation software A 7 V to 9 V external supply is regulated to V to supply the AD7124-8 and support all necessary components. The EVALAD7124-8SDZ board connects to the USB port of the PC by connection to the EVAL-SDP-CB1Z motherboard. The EVAL-AD7124-8SDZ software fully configures the AD7124-8 device register functionality and provides dc time domain analysis in the form of waveform graphs, histograms, and associated noise analysis for ADC performance evaluation. The EVAL-AD7124-8SDZ is an evaluation board that is designed to allow the user to evaluate the features of the ADC. The user PC software executable controls the AD7124-8 over the USB through the system demonstration platform board EVAL-SDPCB1Z . EQUIPMENT NEEDED EVAL-AD7124-8SDZ evaluation board EVAL-SDP-CB1Z system demonstration platform DC signal source USB cable PC running Windows with USB port The EVAL-AD7124-8SDZ evaluation kit features the AD7124-8 24-bit, low power, low noise analog-to-digital converter ADC . FUNCTIONAL BLOCK DIAGRAM NOISE TEST CIRCUITRY VOL T AGE REGU L AT OR 7V to 9V VIN VOLT AGE REGU L AT OR AN AL OG I N PU T S AADD77112244--84 SDP-B SENSOR CONNECTORS VOLTAGE REFERENCE REFI N Figure EVAL-AD7124-8SDZ Block Diagram PC + L ABVIEW BASED SOFT WARE PLEASE SEE THE LAST PAGE FOR AN IMPORTANT WARNING AND LEGAL TERMS AND CONDITIONS. UG-XXX TABLE OF CONTENTS Device 4 Hardware Link Options 4 Power Supplies 6 PrA Initial Version Evaluation Board User Guide Serial Interface Analog Reference Options Evaluation Board Setup Procedures Evaluation Board Software Installation Setting Up the System for Data Capture 11 Software Operation 12 Evaluation Board Schematics and Artwork................................ 18 EVAL-AD7124-8SDZ Bill of 27 Evaluation Board User Guide EVAL-AD7124-8SDZ QUICK START GUIDE To begin using the evaluation board, do the following: With the EVAL-SDP-CB1Z board disconnected from the USB port of the PC, install the AD7124-8 evaluation board software from the CD included in the evaluation board kit. The PC must be restarted after the software installation is complete. For complete software installation instructions, see the Software Installation Procedures section. Connect the EVAL-SDP-CB1Z board to the EVAL-AD71248SDZ board. a. Screw the two boards together using the plastic screwwasher set included in the evaluation board kit to ensure that the boards are connected firmly together. |
| More datasheets: 86A2A-B24-A15/R51L | 74ABT573CMTCX | 74ABT573CMSAX | 74ABT573CPC | 74ABT573CSCX | 74ABT573CMTC | 74ABT573CMSA | 74ABT573CSC | 74ABT573CSJ | 74ABT573CSJX |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived EVAL-AD7124-8SDZ Datasheet file may be downloaded here without warranties.